Cobra Electronics XRSR7 RDU, XRSR7-MDU Users manual

FOURTH DRAFT

Introduction

FOURTH DRAFT

Important Information and Customer Assistance

Important Information

Federal Laws Governing the Use of Radar Detectors

It is not against federal law to receive radar transmissions with your Cobra®radar/laser detector. The Communications Act of 1924 guarantees your right to receive radio transmissions on any frequency. Local laws that contravene this Act, while illegal, may be enforced by your local law enforcement officials until and unless they are prohibited from doing so by federal court action.

Safety/Strobe Alert

Use of this product is not intended to, and does not, ensure that motorists or passengers will not be involved in traffic accidents. It is only intended to alert the motorist that an emergency vehicle equipped with a Cobra Safety Alert, 3M or Tomar strobe transmitter is within range as defined by that product. Please call local fire and police departments to learn if coverage exists in your area.

Some states and municipalities prohibit mounting any object on your windshield. If you drive in these states or areas; you can mount the MDU on the dash.

Safe Driving

Motorists are expected to exercise all due caution while using this product, and to obey all applicable traffic laws.

Security of Your Vehicle

Before leaving your vehicle, always remember to conceal your Remote Display Unit (RDU) in order to reduce the possibility of break-in and theft. Your Main Detector Unit (MDU) has a two-position bracket that, when in the up position, presents a very discreet profile from outside the vehicle.

Customer Assistance

Use your owner’s manual to learn about product features. Cobra Electronics offers the following customer assistance services:

For Assistance in the U.S.A.

Automated Help Desk, English only. 24 hours a day, 7 days a week 773-889-3087. Customer Assistance Operators, English and Spanish, 8:00 am to 6:00 p.m. Central

Time Mon. through Fri. (except holidays) 773-889-3087.

Questions, English and Spanish, Fax: 773-622-2269. Technical Assistance, English only, www.cobra.com.

English and Spanish e-mail, Product info@cobra.com.

For Assistance Outside the U.S.A. Contact Your Local Dealer

6500 West Cortland Street

Chicago, Illinois 60707 USA

www.cobra.com

English

•

™

Controls, Indicators

FOURTH DRAFT

Introduction

The XRS R7 provides detection capabilities for radar, laser and strobe signals. The XRS R9G has all the features of the XRS R7 plus a GPSL module with

alerts when approaching photo-enforced intersections and roads with fixed red light/speed cameras. The XRS R9G can store up to 1,000 additional user programmable Location Alerts.

and Connections

Full-Color Extreme Bright DataGrafix Display

™

USB Connector

Optional GPSL for Model XRS R7 and Standard on Model XRS R9G

IntelliLink™Remote Display Unit (RDU)

Main Detector Unit (MDU)

Power & Pairing Button

GPSL

SURFACE

TOWARDS SKY

Connector

THIS

12-Volt Power Connector

Global Positioning System Locator (GPSL)

MDU Connector

GPSL Cable

Two-Piece, Self-Adhesive Fasteners

Speaker

English

Introduction

FOURTH DRAFT

In This Package

12-Foot Power Cord - Fuse Box

12V-5V USB Power Adapter

RDU Holster and Vent/Visor Clips

•

12-Foot Power Cord - Accessory Plug

USB/USB Mini Retractable Cable

GPSL Cable (R9G Only)

Two Hoop Loop Strips for Mounting Holster

MDU Power Cord Clips

20 clips and 20 adhesive squares

Nothing Comes Close to a Cobra

Introduction

FOURTH DRAFT

Contents

Introduction

Important Information . . . . . . . . . .A1

Customer Assistance . . . . . . . . . . .A1

Controls, Indicators and

Connections . . . . . . . . . . . . . . . .A2

In This Package . . . . . . . . . . . . . . .A3

Product Overview . . . . . . . . . . . . . . .2

Installation Overview . . . . . . . . . . . .4

Your Detector

Installation . . . . . . . . . . . . . . . . . . . .6

Controls and Display . . . . . . . . . . .15

Getting Started . . . . . . . . . . . . . . . .17

EasySet Programming . . . . . . . . . .21

Program Navigation . . . . . . . . . . . .22

Settings . . . . . . . . . . . . . . . . . . . . .24

Detection Alerts . . . . . . . . . . . . . . .29

Radar and Laser . . . . . . . . . . . . . . .32

Maintenance . . . . . . . . . . . . . . . . . .35

Specifications . . . . . . . . . . . . . . . . .36

Warranty

Warranty . . . . . . . . . . . . . . . . . . . . .37

User License

User License . . . . . . . . . . . . . . . . . .39

Customer Assistance

Product Service . . . . . . . . . . . . . . .41

Trademark Acknowledgement . . . .42

Optional Accessories . . . . . . . . . . .43

Accessories Order Info . . . . . . . . . .44

Nothing Comes Close to a Cobra

Introduction

FOURTH DRAFT

Product Overview

Cobra XRS R7 and XRS R9G

WARNING

Modifications or parts not approved by Cobra Electronics Corporation may violate FCC Rules and void authority to operate this equipment.

Read and understand the information in the Installation Overview and Installation sections of this manual for best operation.

The XRS R7 consists of a Main Detector Unit (MDU) and a wireless Remote Display Unit (RDU). The XRS R9G adds a Global Positioning System Locator (GPSL) module, providing fixed red light/speed camera location-based alerts. The XRS R7 can be upgraded with a Cobra GPSL and updated GPSL databases and features purchased later.

Main Detector Unit (MDU)

The MDU is equipped with an adjustable, two-position bracket for detection operation in the down (horizontal) position or in the up position for a less visible profile from the outside. The MDU issues audible messages during power-on and self-testing. The MDU is also equipped with an alternate power button used to power the unit or as a pairing switch, if the RDU is lost or broken and needs to be replaced.

The MDU contains detection function sensors so proper mounting and orientation are important.

•

English

Introduction

FOURTH DRAFT

Product Overview

Remote Display Unit (RDU)

The RDU is a wireless remote controller/display module that shows alerts detected by the MDU. The RDU display uses an Extreme Bright DataGrafix (Organic Light Emitting Diode) Display to show large graphical alerts as signals are detected.

The RDU uses a rechargeable lithium-ion (LiON) battery and is supplied with a holster and clips for mounting on heating/air conditioner vents or visor. Power cables and other adapters are supplied for charging this battery using the vehicle 12V vehicle power with accessory adaptor plug or via a PC USB port.

The normal Auto Dark screen is dark with a moving dot. The Auto Dark screen provides discreet usage and helps conserve RDU battery life. The display color can be changed to match most dash illumination.

™

Global Positioning System Locator (GPSL) (XRS R9G Only)

The GPSL module tracks vehicle location. It uses a database that alerts as it approaches photo-enforced intersections and roads with fixed red light/speed cameras.

Use the GPSL functions to program alerts and store up to 1,000 user programmable Location Alerts. Software will be available to update the database and stay current with future hazards and warning locations. The GPSL module has no external controls and connects to the MDU with one cable.

Registering Your Detector

To register Cobra XRS R7 or XRS R9G go to www.cobra.com. Click on the Product Registration tab.

Nothing Comes Close to a Cobra

Introduction

FOURTH DRAFT

Installation Overview

Mount Unit

Main Detector Unit (MDU)

Note: To power the MDU, use one of the two power cords provided

(See Page A3).

• 12-Foot Power Cord – Acessory Plug: For connecton to 12-volt vehicle accessory outlet, or

• 12-Foot Power Cord – Fuse Box: For connection to vehicle’s fuse box using the in-line fuse and wires.

Fuse box hard wiring is recommended. Use this configuration to provide a more discreet installation. If you are unsure about making this connection yourself, contact a professional installer.

On a negative grounded vehicle:

Figure A

ACC

1. Connect the positive wire [marked with a tag (+)] of the DC power cord to an accessory 12-volt fuse that is controlled by the ignition switch (Figure A).

2. Connect negitive wire (-) to a chassis ground location (Figure A). Body paint may may need to be removed to assure a good ground connection.

English

Introduction

FOURTH DRAFT

Installation Overview

Figure B

Figure C

Mount MDU high on windshield to right of rear view mirror (Figure B). MDU must have clear view through windshield and parallel to the road (Figure C) and have clearance to snap into the “up” position.

Position MDU for easy access to power switch, cable connections and for mirror movement. Mount the MDU on the windshield close to the headliner.

Figure D External View

THIS

SURFA

TOWARD

SKY

IMPORTANT: Do not block the MDU lens with the sun-shaded area of the windshield (Figure D) or the rear view mirror.

Dash mounting results in decreased performance. Heated windshields currently available on some vehicles (Instaclear for Ford, Electriclear for GM), may block or weaken incoming signals. Consult your automobile manufacturer.

Nothing Comes Close to a Cobra

Your Detector

FOURTH DRAFT

Global Positioning System Locator (GPSL) - (XRS R9G Model Only)

Figure E Internal View

Mount GPSL module close enough to the MDU for supplied cable to connect both modules (Figure E). Mount GPSL with proper side (“This Surface Toward Sky” wording embossed in unit case) attached to windshield and exposed to the sky.

Figure F Internal View

Installation

IMPORTANT: Some states and municipalities prohibit mounting any object on the windshield. If you drive in these states or areas, mount the MDU on the dash (Figure F).

IMPORTANT: Both the MDU and GPSL units will need to be flipped upside-down compared to a dashboard installation. Pay special attention to mount GPSL unit with proper side ( embossed in unit case) towards the sky.

English

“This Surface Toward Sky”

wording

Your Detector

FOURTH DRAFT

Installation

Main Detector Unit (MDU)

1. Position MDU before actual mount.

• Do not attempt to adjust MDU bracket.

• Hold unit in place.

• Using non-permanent pen, mark two opposite corners.

2. Peel off film from two-piece fastener strips. Align with two corner markings made in step 1. Press MDU bracket against windshield.

• Fastener strips cannot easily be removed. Strength of adhesive strips increases with time.

• Do not pull on MDU for first 20 minutes.

Nothing Comes Close to a Cobra

Your Detector

FOURTH DRAFT

Installation

3. Loosen MDU (gray) bracket adjust knob. Adjust module to a position parallel to the road. Tighten knob to set proper detection position. The MDU mounting bracket has two detent positions:

• one for detection operation (horizontal position)

• one for storage or concealment (up position). Makes MDU less visible from outside.

IMPORTANT:

will not provide radar detection in “Stored/Concealed” position.

MDU

Not In Use. Stored/Concealed Position.

Bracket Adjust Knob

Lower to Operating Detection Position.

Detection Position

English

Your Detector

FOURTH DRAFT

Installation

4. Attach power cord to MDU. Use power cord clips to route to fuse box or lighter/accessory outlet, depending on the selected power cord. Surfaces must be clean and free of dirt, oil and dust. Plug in the power cord.

Internal View

Nothing Comes Close to a Cobra

Your Detector

FOURTH DRAFT

Installation

Remote Display Unit (RDU)

Battery Installation

1. Turn RDU over and slide battery cover off of RDU body.

2. Carefully plug battery wire connector into the battery connection port in RDU. Connector only fits one way.

3. Replace battery cover.

Battery Charging

The unit is shipped with a sealed lithium-ion (LiON) batery pack that is rechargeable.

IMPORTANT: Avoid temperature extremes (hot and/or cold) to help prolong battery life and performance. DO NOT leave RDU exposed to direct sunlight. If the RDU is mounted on vent, clip must be on lower fin to avoid hot air blowing on RDU battery compartment.

•

NOTE: When battery begins to discharge too quickly, it is time to install a new battery.

English

Your Detector

FOURTH DRAFT

WARNING

This lithium-ion (LiON) battery should only be recharged inside the RDU. Do not substitute any other type of charging adapter or charging base to charge the battery. Battery damage, fire or explosion may result.

Installation

1. Attach 12-volt – 5-volt retractable USB power cable to bottom of RDU and to 12-volt power adapter.

2. Connect 12-volt power adapter to vehicle accessory outlet.

3. Initial charge for battery is two (2) hours.

NOTE: Lithium-ion (LiON) batteries are toxic. Please dispose of properly. Some municipal waste disposal agencies have special provisions for battery disposal.

NOTE: After battery is fully charged, unit can be operated without retractable power cord until battery needs recharging.

Nothing Comes Close to a Cobra

+ 34 hidden pages