Staying in touch with your family and friends is
convenient and easy when using your microTALK
®
radio. Some of the many uses you will discover include:
Communicating with others while hiking, biking, and working;
keeping track of family and friends at a crowded public event;
checking with travel companions in another car; talking with
neighbors; arranging meeting spots with others while shopping
at the mall.
Secure your microTALK
®
radio while on the go.
Carrying your microTALK®radio with you is
easy when using the belt clip or wrist strap.
The belt clip easily attaches to your belt, purse,
or backpack. Simply squeeze the clip and place
it where you prefer.
For Assistance In the U.S.A.
In this user’s manual, you should find all the information you need
to operate your microTALK
®
radio. If you require further assistance
after reading this manual, Cobra
®
Electronics offers the following
customer assistance services:
Automated Help Desk
English only. 24 hours a day, 7 days a week 773-889-3087 (phone).
Customer Assistance Operators
English and Spanish. 8:00 a.m. to 6:00 p.m. CT,
Monday through Friday (except holidays) 773-889-3087 (phone).
Questions
English and Spanish. Faxes can be received at 773-622-2269 (fax).
Technical Assistance
English only. www.cobra.com (on-line: Frequently Asked Questions).
English and Spanish. productinfo
• 2-Way Radio
With up to a seven
(7) mile (11 km) range
•
22 Channels
Seven (7) shared
with FRS/GMRS,
seven (7) FRS
only, eight (8)
GMRS only
•
38 Privacy Codes
• Ten (10) Channel NOAA
All Hazards Radio
• Hands-Free
Operation (VOX)
• VibrAlert
Silent Paging
• Ten (10) Location
Memory
• Signal Strength
Meter
• Scan
Channel, privacy
code, memory
•
Selectable
Hi•Low Power
In GMRS)
•
Backlit
LCD Display
• Button Lock
• Call Alert
Ten (10)
selectable tones
•
Speaker/
Microphone Jack
• Roger Beep
Selectable On/Off
•
Battery/Power Saver
• Keystroke Tones
Selectable On/Off
Auto Squelch
•
• Maximum Range
Extender
• Belt Clip
• Wrist Strap
English
A3
Power Icon
®
Transmit Icon
Channel Numbers
Product Features
Backlit LCD Display
Lock Icon
Call Tones and
VibrAlert®Icon
Signal Strength
Meter Icon
Hi•Low
Receive/
Battery Level
Indicator
Important FCC Licensing Information
This radio operates on General Mobile Radio
Service (GMRS) frequencies which require a
Federal Communications Commission (FCC)
license. See page 22 for licensing and other
related information.
Keystroke Tones Icon
Roger Beep Icon
CTCSS Privacy
Code Numbers
All Hazards
Radio Icon
Memory
Icon
Scan Icon
Vox Icon
Power Saver Icon
Memory
Location
Number
OperationWarrantyIntroductionCustomer Assistance
Optional Accessories
You can find quality Cobra®products and accessories at your local
®
Cobra
dealer, or in the U.S.A., you can order directly from Cobra®.
Ordering From U.S.A.
Call 773-889-3087 for pricing or visit www.cobra.com.
For credit card orders, complete and return this order form to fax
number 773-622-2269. Or call 773-889-3087 (Press 1 from the
main menu) 8:00 a.m. to 6:00 p.m. CT, Monday through Friday.
Make check or money order payable to: Cobra®Electronics, Attn:
Accessories Dept., 6500 West Cortland Street, Chicago, IL 60707 U.S.A.
To order online, please visit our website: www.cobra.com
Name
Address (No P.O. Boxes)
CityState/ProvinceZipCountry
Telephone
Credit Card Number Type: ❒Visa ❒MasterCard ❒DiscoverExp. Date
Ohio add 6%
California add 7.25%
Illinois add 8.75%
*For AK, HI and PR add additional $26.95 for FedEx Next Day or
$10.95 for FedEx 2nd Day. Excludes weekends and holidays shipments.
Please allow two (2) to three (3) weeks for delivery in the U.S.A.
Prices subject to change without notice.
U.S. Subtotal
(Tax if Applicable)
Shipping/Handling
Total
Nothing comes close to a Cobra
®
•
25
Introduction
Operation
Customer Assistance
Warranty
Caring for Your microTALK®Radio
Your microTALK®radio will give you years of trouble-free service
if cared for properly. Handle the radio gently. Keep the radio away
from dust. Never put the radio in water or in a damp place.
Avoid exposure to extreme temperatures.
Remove Belt Clip
Batteries
To Install Or Replace Batteries:
1. Remove belt clip by releasing belt clip
latch and sliding clip up.
Pull DownLockLatch
Insert Batteries
2. Pull down on the battery door latch to
remove the battery compartment cover.
3. Insert four (4) AAA batteries. (Always use
high quality alkaline batteries.) Position
batteries according to polarity markings.
4. Replace battery compartment cover and
belt clip.
Contact your local Cobra
®
dealer or Cobra
®
directly for optional charger accessories.
The Basics to Get You Started
Your microTALK®radio is easy to use.
To get started, simply:
1. Rotate the
On your radio.
2. Press the
button to select a channel.
On/Off Volume knob to turn
Channel Up or Channel Down
Both radios must be tuned to the
same channel/privacy code to
communicate.
3. Press and hold the
speaking into the microphone.
4. When finished talking, release the
Talk button while
Talk
button and listen for a response.
•
•
Nothing comes close to a Cobra
®
1
Operation
On/Off Power
Battery Low
Battery Save Mode
Using Your Radio
Tur ni ng On Your microTALK®Radio
To Turn On Your Radio:
1. Rotate the On/Off Volume knob clockwise
to turn
On your radio and adjust the volume.
A series of tones will indicate the radio is
Your microTALK
mode, ready to receive transmissions. The radio
is always in
Talk, Call or Mode buttons are pressed.
®
radio is now in Standby
Standby mode, except when the
Battery Low
Your microTALK®radio has a battery level meter
that shows when battery power is decreasing.
The greater the number of ascending bars visible,
the stronger the battery level. When the battery
level is low, the last bar and “bALo” will flash
indicating your batteries should be replaced or
recharged, if using rechargeable batteries.
Auto Battery Save
Your microTALK®radio has a unique circuit
designed to extend battery life. If there are
no transmissions within ten (10) seconds,
the radio will automatically switch to
Save
mode and the Power Saver icon will flash
in the display. This will not affect the radio’s
ability to receive incoming transmissions.
On.
Battery
Operation
•
Talk Button
Communicating with Another Person
To Talk To Another Person:
Customer Assistance WarrantyIntroduction
•
1. Press and hold the Talk button.
Two (2) Inches [Five
(5) cm] From Mouth
•
2. With the microphone about two (2) inches
[five (5) cm] from your mouth, speak in a
normal voice.
3. Release the
finished talking and listen for a response.
You cannot receive incoming calls while
pressing the
Talk button when you are
Talk button.
Both radios must be tuned to
the same channel/privacy code to
communicate.
Channel Button
•
Channel Number
Channels
To Select A Channel:
1. With the radio On, select any of the
22 channels by pressing the
Channel Up
or Channel Down button.
•
Both radios must be tuned to the
same channel to communicate.
Channels 1 through 7 are shared with FRS/
GMRS. Channels 8 through 14 are FRS only.
Channels 15 through 22 are GMRS only.
See page 21 for FRS/GMRS frequency
allocations and compatibility charts.
Listening
Listening for a Response
When You Are Finished Talking:
1. Release the Talk button to receive incoming
transmissions. Your microTALK
always in
Standby mode while the Talk or
®
radio is
•
Call buttons are not pressed.
2
English
Nothing comes close to a Cobra
™
3
Operation
Volume Knob
Call Button
Hi•Low Button
Hi Power Icon
Low Power Icon
Light/Max Range
Using Your Radio
Volume
To Adjust The Volume:
1. Rotate the On/Off Volume knob.
Call Button
To Alert Another Person That You Are Calling:
1. Press and release the Call button.
The other person will hear a two (2)
second call tone. You cannot send or
receive transmissions during the two (2)
second call tone.
See page 19 on how to select
between ten (10) call tone settings.
Selectable High•Low Power Output
When in close proximity to another party or
during favorable conditions, you can switch from
High to Low Power to extend battery life.
This feature applies to GMRS Channels
1 through 7 and 15 through 22 only.
Channels 8 through 14 operate
exclusively on low power.
To Switch From High To Low Power:
1. Press and release the Hi•Low button.
When in high power and using Channels
1 through 7 and 15 through 22, the
will be visible on the display.
When in low power and when using Channels
8 through 14, the
the display.
Low icon will be visible on
Display Illumination
To Illuminate Your Display:
1. Press and release the Light/Max Range button
to illuminate the display for ten (10) seconds.
Hi icon
Operation
•
•
Auto Squelch/Maximum Range
Your microTALK®radio is equipped with Auto Squelch, which
automatically shuts
due to terrain, conditions, or if you’ve reached your
limit.
Range
You can temporarily turn
range extender, allowing all signals to be received and extending
the maximum range of your radio.
Light/Max Range
Off weak transmissions and unwanted noise
To Temporarily Turn Off Auto Squelch:
1. Press the Light/Max Range button less
than five (5) seconds.
Customer Assistance WarrantyIntroduction
•
Maximum
Off auto squelch or turn On maximum
If you hear two (2) beeps, you have turned
the maximum range extender
On (see below).
To Turn Maximum Range Extender On:
•
1. Press and hold the Light/Max Range button
for at least five (5) seconds until you hear
two (2) beeps which indicates the maximum
range extender is
On.
To Turn Maximum Range Extender Off:
1. Press and release the Light/Max Range
button or change channels.
Lock Function
The Lock button locks the Channel, Mode, and
•
Hi•Low Power buttons to prevent accidental operation.
Lock Button
Lock Mode
To Turn The Lock Button On Or Off:
1. Press and hold the Lock button for
two (2) seconds.
A double beep sound is used to confirm your
lock
On or Off request. When in Lock mode,
the
Lock icon will be displayed.
•
4
English
Nothing comes close to a Cobra
™
5
Operation
Using Your Radio
Speaker/Microphone Jack
Your microTALK®radio can be fitted with an external Speaker/
Microphone
accessories order form section for ordering information.
Only Cobra
Speaker/Microphone
Signal Strength
, freeing your hands for other tasks. See the
®
authorized accessories are recommended.
To Attach Your Speaker/Microphone:
1. Open the speaker/microphone tab
on top of your microTALK
2. Insert the plug into the speaker/
microphone jack.
®
radio.
Signal Strength Meter
Your microTALK®radio has a Signal Strength
that shows the strength of your incoming
Meter
and outgoing transmissions. The ascending bars
next to the signal strength indicate the strength
of the signal. The greater the number of bars
visible, the stronger the signal. The fewer
number of bars visible, the weaker the signal.
microTALK®Range
Your microTALK®radio has a range of up to seven (7) miles
(11 km). Your range will vary depending on terrain and conditions.
Maximum Range
Reduced Range
Reduced Range
In flat, open country your radio will
operate at maximum range.
Buildings and foliage in the path of the
signal can reduce the range of the radio.
Dense foliage and hilly terrain will
further reduce the range of the radio.
On FRS channels 8 through 14, your radio
automatically switches to low power, which
will limit the range the radio can communicate.
Remember, you can achieve maximum
range by using maximum range
extender. See page 5 for details.
Operation
•
Scrolling Through Mode Functions
By scrolling through the Mode functions, you will be able to
select or turn
When scrolling through the
On preferred features of your microTALK®radio.
Customer Assistance WarrantyIntroduction
•
Mode functions, your radio features
will be displayed in the same predetermined order:
Mode Button
•
Scroll through the mode functions by pressing the
or at any point press the
Set Privacy Codes
Set NOAA All Hazards Radio Channel
Set VOX On/Off
Set VOX Sensitivity Level
Set Memory Locations
Set Channel Scan
Set Privacy Code Scan
Set Memory Location Scan
Set VibrAlert
Set Call Tones
Set Roger Beep On/Off
Set Keystroke Tones On/Off
®
and/or Call Alert
Mode button
Talk button to return to Standby mode.
•
6
English
Nothing comes close to a Cobra
™
7
Operation
Mode Functions
CTCSS Privacy Codes
CTCSS (Continuous Tone Coded Squelch System) is an advanced
tone coding system allowing you to select one (1) of 38 privacy
codes to reduce interference from other users on the channel.
If you are using a privacy code, both radios must
be tuned to the same channel and privacy code to
communicate. Each channel will remember the
last privacy code you selected.
Mode Button
To Select A Privacy Code:
1. After selecting a channel, press the Mode
button until the small numbers next to the
channel number flash on the display.
Privacy Code
Channel Button
2. Press the
3. When your desired privacy code is displayed,
Channel Up or Channel Down
button to select a privacy code. You can hold
the
Up or Down button for fast advance.
choose one (1) of the following:
a. Press the
b. Press the
c. Do not press any buttons for 15 seconds
Mode button to enter the new
setting and proceed to other functions.
Lock button to enter the new
setting and return to
Standby mode.
to enter the new setting and return to
Standby mode.
Operation
•
NOAA* All Hazards Radio Channels
You can use your microTALK®radio to listen to NOAA All Hazards
Radio
channels transmitting in your area.
Mode Button
To Listen To All Hazards Radio Channels:
Customer Assistance WarrantyIntroduction
•
1. Press the Mode button until the Weather
(All Hazards Radio) icon, the currently
selected All Hazards Radio channel,
Hazards Radio Icon
and signal strength are displayed.
2. Use the
Channel Up or Channel Down
button to change All Hazards Radio channels.
Weather (All Hazards Radio) icon will
3.
Channel Button
continue to be displayed when All Hazards
Radio is
On. Choose one (1) of the following:
a. Press the
b. Press the
*National Oceanographic and Atmospheric Administration
Mode button to proceed
to other functions.
Lock button to exit All
Hazards Radio channel mode and
Standby mode.
return to
8
English
Nothing comes close to a Cobra
™
9
Operation
Mode Functions
Voice Activated Transmit (VOX)
In VOX mode, your microTALK®radio can be used “hands-free,”
automatically transmitting when you speak. You can set the
VOX
sensitivity level to fit the volume of your voice and avoid
transmissions triggered by background noise.
Mode Button
To Turn VOX Mode On Or Off:
1. Press the Mode button until the VOX icon
On or
VOX Icon
flashes on the display. The current
Off setting is displayed.
2. Press the
Channel Up or Channel Down
button to turn VOX On or Off.
3. Choose one (1) of the following:
Channel Button
Mode Button
VOX Sensitivity Level
a. Press the
b. Press the
To Set The Sensitivity:
1. Press the Mode button until the VOX icon
flashes and the current sensitivity level is
displayed.
Mode button to enter the
On or Off setting and proceed
selected
to other functions.
Lock button to enter the
On or Off setting and return
selected
to
Standby mode.
The current sensitivity level is displayed
with letters “LE” and a Number 01
through 05, with Number 05 being the
most sensitive level and Number 01
Channel Button
being the least sensitive level.
2. Press the
Channel Up or Channel Down
button to change the setting.
3. Choose one (1) of the following:
a. Press the
b. Press the
Mode button to enter the selected
setting and proceed to other functions.
Lock button to enter the selected
setting and return to
Standby mode.
Customer Assistance WarrantyIntroductionOperation
•
Ten (10) Memory Locations
Your microTALK®radio has Ten (10) Memory Locations for storing
your most frequently used channels and channel/privacy codes.
These
Memory Locations can be selected individually or can
•
be scanned. (See page 17 for memory location scan.)
Mode Button
To Program A Memory Location:
1. Press the Mode button until the Memory icon
and the memory location flash on the display.
Memory Icon
2. Press the
Channel Up or Channel Down
button to select the memory location
(0 through 9).
If a location has been programmed
Channel Button
Lock Button
before, its associated channel/privacy
code will be shown on the display.
3. Press the
4. Press the
Lock button to enter a new memory
location or edit an already programmed
memory location. The channel numbers
will flash on the display.
Channel Up or Channel Down
button to select a channel (1 through 22).
5. Press the
6. Press the
Lock button. The privacy code
numbers will flash on the display.
Channel Up or Channel Down
button to select a privacy code (00 to 38).
7. Choose one (1) of the following:
a. Press the
b. Press the
c. Press the
Lock button to enter the channel/privacy code in
the selected memory location and return to the beginning
of memory location options.
Mode button to enter the channel/privacy code in
the selected memory location and proceed to other functions
on the channel/privacy code displayed before you entered
mode functions.
Talk button to enter the channel/privacy code in
the selected memory location and return to
on the selected memory location.
Standby mode
10
English
Nothing comes close to a Cobra
™
11
Operation
Mode Functions
While setting a memory location, if you do not press any buttons
for 15 seconds, your radio will automatically return to
mode on the channel/privacy code displayed before you entered
mode functions.
Mode Button
To Recall A Stored Memory Channel Location:
Standby
1. Press the Mode button until the Memory
icon and the memory location number flash
on the display.
Memory Icon
Channel Button
2. Press the
Channel Up or Channel Down
button to select a memory location
(0 through 9).
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
3. Press the
Talk button to return to Standby
mode on the selected memory location.
Pressing the
you in “program a memory location.”
While recalling a stored memory
location, if you do not press any
buttons for 15 seconds, your radio will
automatically return to
on the channel/privacy code displayed
before you entered mode functions.
Lock button will put
Standby mode
Mode Button
Memory Icon
Channel Button
Lock Button
Channel 0
Operation
Customer Assistance WarrantyIntroduction
To De-Program A Memory Location:
1. Press the Mode button until the Memory icon
and the memory location flash on the display.
2. Press the
3. Press the
4. Press the
Channel Up or Channel Down
button to select the memory location
(0 through 9).
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
Lock button. The channel numbers
will flash on the display.
Channel Up or Channel Down
button to select Channel 0.
5. Choose one (1) of the following:
a. Press the
Lock button to enter the
channel/privacy code in the selected
memory location and return to the
beginning of memory location options.
b. Press the
While de-programming a memory location,
if you do not press any buttons for 15 seconds,
your radio will automatically return to
Mode button to enter the
channel/privacy code in the selected
memory location and proceed to other
functions on the channel/privacy code
displayed before you entered mode
functions.
Standby
mode on the channel/privacy code displayed
before you entered mode functions.
12
English
Nothing comes close to a Cobra
™
13
Operation
Mode Functions
Channel Scan
Your microTALK®radio can automatically scan channels.
Mode Button
To Scan Channels:
1. Press the Mode button until the Scan icon
and the channel numbers flash on the display.
Scanning Channels
Channel Button
2. Press the
The
scan is
channels and stop if an incoming transmission is
detected. Your radio will remain on that channel
for ten (10) seconds.
While setting channel scan, if you do not
press any buttons for 15 seconds, your radio
will automatically return to
Channel Up or Channel Down
button to begin scanning channels.
The radio ignores specific privacy
codes while scanning channels.
Scan icon will continue to be displayed when
On. Your radio will continue to scan all
Standby mode on
the channel or channel/privacy code displayed
before you entered mode functions.
During Channel Scan (while receiving an incoming transmission),
You Can Choose From The Following:
a. Press and hold the Talk button to communicate on that
channel. Your radio will remain on that channel and return
Standby mode.
to
b. Press the
Channel Up or Channel Down button to resume
scanning channels.
If you press the
(10) seconds of receiving a transmission, you will transmit on
the channel on which you last received a transmission. This will
return the radio to
If you do not press any button within ten (10) seconds, your radio
will automatically resume scanning channels.
Talk button while scanning and not within ten
Standby mode.
Operation
•
During Channel Scanning (while not receiving a transmission),
You Can Choose From The Following:
a. Press and hold the Talk button to communicate on the channel
or channel/privacy code that was displayed before you entered
mode functions or the channel on which, during scanning,
you last received a transmission. This will return the radio
to
Standby mode.
b. Press the
c. Press the
Mode button to proceed to set privacy code scan on
the channel that was either displayed before you entered mode
functions or on which, during channel scanning, you last
received a transmission (see below for further details).
Lock button to return to Standby mode on the
channel/privacy code that was displayed before you entered
mode functions or the channel on which, during scanning,
you last received a transmission.
Privacy Code Scan
Your microTALK®radio can automatically scan the Privacy Codes
Customer Assistance WarrantyIntroduction
•
(00 through 38) within one (1) channel.
Select Channel
To Scan Privacy Codes:
1. While in Standby mode, press the
Channel Up or Channel Down button to
choose the channel on which you wish
Mode Button
Scan Privacy Codes
Channel Button
to scan privacy codes.
2. Press the
3. Press the
The
when privacy code scan is
continue to scan privacy codes and stop as an
incoming transmission is detected. Your radio
will remain on that channel/privacy code for
ten (10) seconds.
Mode button until the Scan icon and
the privacy code numbers flash on the display.
Channel Up or Channel Down
button to begin scanning privacy codes
within the channel you selected.
Scan icon will continue to be displayed
On. Your radio will
14
English
Nothing comes close to a Cobra
™
15
Operation
Mode Functions
While setting privacy code scan, if you do not press any buttons
for 15 seconds, your radio will automatically return to
mode on the channel/privacy code that was displayed before
you entered mode functions.
During Privacy Code Scan (while receiving an incoming
transmission), You Can Choose From The Following:
Standby
a. Press and hold the Talk button to communicate on that
channel/privacy code. Your radio will remain on that
channel/privacy code and return to
b. Press the
If you press the
seconds of receiving a transmission, you will transmit on the
channel/privacy code on which you last received a transmission.
This will return the radio to
If you do not press any button within ten (10) seconds, your radio
will automatically resume scanning privacy codes.
Channel Up or Channel Down button to resume
scanning privacy codes.
Talk button while scanning and not within ten (10)
Standby mode.
Standby mode.
During Privacy Code Scan (while not receiving a transmission),
You Can Choose From The Following:
a. Press and hold the Talk button to communicate on the
channel/privacy code that was displayed before you entered
mode functions or the channel/privacy code on which, during
scanning, you last received a transmission. This will return
the radio to
b. Press the
scan (see page 17 for further details).
c. Press the
channel/privacy code that was displayed before you entered
mode functions or the channel/privacy code on which,
during scanning, you last received a transmission.
Standby mode.
Mode button to proceed to set memory location
Lock button to return to Standby mode on the
Operation
Customer Assistance WarrantyIntroduction
Memory Location Scan
Your microTALK®radio can automatically scan up to ten (10)
programmed
Mode Button
Memory Locations.
If there are one (1) or fewer memory locations
programmed in your radio, the scan memory
locations option will not be available. To program
at least two (2) memory locations, see program
memory locations on page 11.
To Scan Memory Locations:
1. Press the Mode button until the Scan icon,
Memory icon and the memory location
Scanning Locations
Channel Button
number flash on the display.
2. Press the
The
continue to be displayed when memory location
scan is
Channel Up or Channel Down button
to begin scanning memory locations.
Scan icon and the Memory icon will
On. Your radio will continue to scan
memory locations and stop if an incoming
transmission is detected. Your radio will remain
on that memory location for ten (10) seconds.
While setting memory location scan, if you do
not press any buttons for 15 seconds, your radio
will automatically return to
the channel/privacy code displayed before
Standby mode on
you entered mode functions.
During Memory Location Scanning (while receiving an Incoming
transmission), You Can Choose From The Following:
a. Press and hold the Talk button to communicate on that
memory location. Your radio will remain on that memory
location and return to
b. Press the
Channel Up or Channel Down button to resume
scanning memory locations.
Standby mode.
•
16
English
Nothing comes close to a Cobra
™
17
Operation
Mode Functions
If you press the Talk button while scanning and not within ten (10)
seconds of receiving a transmission, you will transmit on the
memory location on which, during scanning, you last received
a transmission. This will return the radio to
If you do not press any button within ten (10) seconds, your radio
will automatically resume scanning memory locations.
Standby mode.
During Memory Location Scanning (while not receiving a
transmission), You Can Choose From The Following:
a. Press and hold the Talk button to communicate on the
channel/privacy code that was displayed before you entered
mode functions or memory location on which, during
scanning, you last received a transmission. This will
return the radio to
b. Press the
c. Press the
channel/privacy code that was displayed before you entered
mode functions or the memory location on which, during
scanning, you last received a transmission.
To reduce the number of memory locations being scanned,
you may de-program any unwanted locations. (See page 13
to de-program a memory location.)
Standby mode.
Mode button to proceed to other functions.
Lock button to return to Standby mode on the
Operation
Customer Assistance WarrantyIntroduction
VibrAlert®and Call Tones
Your microTALK®radio can alert you to incoming signals by
sounding an audible call tone, by vibrating silently, or both.
Mode Button
To Change Call Settings:
VibrAlert®+ Ring
1. Press the Mode button until
Call Setting icon flashes
the
on the display. The current
Channel Button
setting (vibrate + ring,
vibrate only, or ring only)
is displayed.
2. Press the
Channel Up or
Channel Down button to
change the call setting.
VibrAlert®Only
Ring Only
3. Choose one (1) of
the following:
a. Press the
b. Press the
Mode button
to enter the new setting
and proceed to other functions.
Lock button to enter the new
setting and return to
Standby mode.
Ten (10) Call Tone Settings
You can choose between ten (10) different call tone settings to
transmit a unique call alert.
Mode Button
To Change A Call Tone Setting:
1. Press the Mode button until the letter “C”
and the current call tone number (01 through
10) is displayed.
Call Tone Setting
2. Press the
Channel Up or Channel Down
button to hear the other call tone settings.
3. Choose one (1) of the following:
Channel Button
a. Press the
b. Press the
Mode button to enter the new
setting and proceed to other functions.
Lock button to enter the new
setting and return to
Standby mode.
•
•
18
English
Nothing comes close to a Cobra
™
19
Operation
Mode Functions
Roger Beep Confirmation Tone
Your listener will hear an audible tone when you release the Talk
button. This alerts the other party that you are finished talking and
it is OK for them to speak.
Mode Button
To Turn Roger Beep On Or Off:
1. Press the Mode button until the Roger Beep
icon flashes on the display. The current On orOff setting is displayed.
Roger Beep On
2. Press the
Channel Up or Channel Down
button to select roger beep On or Off.
3. Choose one (1) of the following:
Channel Button
a. Press the
b. Press the
Mode button to enter the new
setting and proceed to other functions.
Lock button to enter the new
setting and return to
Standby mode.
Keystroke Tones
With Keystroke Tones turned On, your radio will
sound beeps each time you press a button or
change a setting.
Mode Button
To Change Keystroke Tones:
1. Press the Mode button until the Keystroke
Tones
icon flashes on the display. The current
On or Off setting is displayed.
Keystroke Tones On
2. Press the
Channel Up or Channel Down
button to turn keystroke tones On or Off.
3. Choose one (1) of the following:
Channel Button
English
20
a. Press the
b. Press the
Mode button to enter the new
setting and return to
Lock button to enter the new
setting and return to
Standby mode.
Standby mode.
Customer Assistance WarrantyIntroductionOperation
•
•
General Specifications
A. FRS/GMRS
Frequency
Allocation and
Compatibility
Important: Please note that Cobra
GMRS models with 15 Channels may
designate different channel numbers for
the same frequency. For example, a
Cobra®15 Channel GMRS model would
need to be tuned to Channel 11 in order
to communicate with a 22 Channel GMRS
tuned to Channel 15. Please refer to the
chart below for channel/ frequency
number compatibility.
A= Channel No. For
22 Channel GMRS Models
B = Channel No. For 15
Channel GMRS Models
C = Type of Radio Service
D = Frequency in MHz
E = Power in Watts
a = 2.0/0.5 (selectable)
b = 0.5
AB CDE
1 1 FRS/GMRS 462.5625 a
2 2 FRS/GMRS462.5875 a
3 3 FRS/GMRS 462.6125 a
4 4 FRS/GMRS 462.6375 a
5 5 FRS/GMRS 462.6625 a
6 6 FRS/GMRS 462.6875 a
7 7 FRS/GMRS 462.7125 a
8 FRS 467.5625 b
9 FRS 467.5875 b
10 FRS467.6125 b
11 FRS 467.6375b
12 FRS 467.6625 b
13 FRS 467.6875 b
14 FRS 467.7125b
15 11 GMRS 462.5500 a
16 8 GMRS 462.5750 a
17 12 GMRS 462.6000 a
18 9 GMRS 462.6250 a
19 13 GMRS 462.6500 a
20 10 GMRS 462.6750 a
21 14 GMRS 462.7000 a
22 15 GMRS 462.7250 a
2. Battery Operating Range . . . . . . V 4.2 - 6.0
Nothing comes close to a Cobra
Unit
Unit
Unit
®
•
Nominal
Nominal
Nominal
21
Customer Assistance
Licensing and Service
IMPORTANT NOTICE: FCC LICENSE REQUIRED
This 2-way radio operates on GMRS (General Mobile Radio Service)
frequencies which require an FCC (Federal Communications Commission)
license. A user must be licensed prior to operating on Channels 1 through 7
or 15 through 22, which comprise the GMRS channels of this radio. Serious
penalties could result for unlicensed use of GMRS channels, in violation of
FCC rules, as stipulated in the Communications Act’s Sections 501 and
502 (amended).
Licensed users will be issued a call sign by the FCC, which should be used
for station identification when operating this radio. GMRS users should also
cooperate by engaging in permissible transmissions only, avoiding channel
interference with other GMRS users, and being prudent with the length of
their transmission time.
For licensing information and application forms, please call the FCC Hotline
at 800-418-FORM. Request form #159 and form #605. Questions regarding
the license application should be directed to the FCC at 888-CALL-FCC.
Additional information is available on the FCC’s website at www.fcc.gov.
Safety Information for microTALK®Radios
Your wireless handheld portable transceiver contains a low power transmitter.
Talk button is pushed, it sends out radio frequency (RF) signals.
When the
The device is authorized to operate at a duty factor not to exceed 50%.
In August 1996, the Federal Communications Commissions (FCC) adopted
RF exposure guidelines with safety levels for handheld wireless devices.
Important:
FCC RF Exposure Requirements: For body-worn operation, this radio has
been tested and meets the FCC RF exposure guidelines when used with Cobra
accessories supplied or designated for this product. Use of other accessories
may not ensure compliance with FCC RF exposure guidelines. Use only the
supplied antenna. Unauthorized antennas, modifications, or attachments
could damage the transmitter and may violate FCC regulations.
Normal Position:
Hold the transmitter approximately two (2) inches from your face and
speak in a normal voice, with the antenna pointed up and away.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two (2) conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Warnings: Replacement or substitution of transistors, regular diodes or
other parts of a unique nature, with parts other than those recommended by
Cobra®may cause a violation of the technical regulations of part 95 of the FCC
rules, or violation of type acceptance requirements of part 2 of the rules.
OperationWarrantyIntroduction
•
Product Service Questions
If you have any questions about operation or installing
your new Cobra
®
product, or if you are missing parts…
Customer Assistance
•
Please call Cobra®first! DO NOT RETURN THIS PRODUCT
TO THE STORE! See customer assistance on page A1.
For Products Purchased in the U.S.A.
If your product should require factory service, please call Cobra®first
before sending your radio. This will ensure the fastest turn-around
time on your repair. You may be asked to send your radio to the
®
factory. It will be necessary to furnish the following to have
Cobra
the product serviced and returned.
1) For Warranty Repair include some form of proof-of-purchase,
such as a mechanical reproduction or carbon of a sales receipt.
If you send the original receipt, it cannot be returned.
2) Send the entire product.
3) Enclose a description of what is happening with the radio.
Include a typed or clearly printed name and address of where
the radio is to be returned.
4) Pack radio securely to prevent damage in transit. If possible,
®
use the original packing material.
5) Ship prepaid and insured by way of a traceable carrier such as
United Parcel Service (UPS) or First Class Mail to avoid loss in
transit to Cobra Factory Service, Cobra Electronics Corporation,
6500 West Cortland Street, Chicago, Illinois 60707 U.S.A.
6) If the radio is in warranty, upon receipt of your radio it will
either be repaired or exchanged depending on the model.
Please allow approximately three (3) to four (4) weeks before
contacting Cobra
a letter will automatically be sent informing you of the repair
®
for status. If the radio is out of warranty,
charge or replacement charge. If you have any questions,
please call 773-889-3087 for assistance.
For Products Purchased Outside the U.S.A.
Please contact your local dealer for product service information.
22
English
Nothing comes close to a Cobra
®
23
Limited 1-Year Warranty
•
For Products Purchased in the U.S.A.
Cobra®Electronics Corporation warrants that its Cobra®GMRS radios,
and the component parts thereof, will be free of defects in workmanship
and materials for a period of one (1) year from the date of first consumer
purchase. This warranty may be enforced by the first consumer purchaser,
provided that the product is utilized within the U.S.A.
Cobra
®
will, without charge, repair or replace, at its option, defective
GMRS radios, products or component parts upon delivery to the Cobra
®
Factory Service department, accompanied by proof of the date of first
consumer purchase, such as a duplicated copy of a sales receipt.
You must pay any initial shipping charges required to ship the product
for warranty service, but the return charges will be at Cobra
®
’s expense,
if the product is repaired or replaced under warranty. This warranty gives
you specific legal rights, and you may also have other rights which may
vary from state to state.
Exclusions: This limited warranty does not apply: 1) To any product
damaged by accident; 2) In the event of misuse or abuse of the product
or as a result of unauthorized alterations or repairs; 3) If the serial
number has been altered, defaced, or removed; 4) If the owner of the
product resides outside the U.S.A.
All implied warranties, including warranties of merchantability and
fitness for a particular purpose are limited in duration to the length of
this warranty. Cobra
®
shall not be liable for any incidental, consequential
or other damages; including, without limitation, damages resulting from
loss of use or cost of installation.
Some states do not allow limitations on how long an implied warranty
lasts and/or do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations may not apply to you.
For Products Purchased Outside the U.S.A.
Please contact your local dealer for warranty information.
24
English
Warranty and Accessories
Warranty
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.