Cobra Electronics MRHH475FLTBTEU User Manual

Download

Introduction

MICROBLUEMICROBLUE

Our Thanks to You and Customer Assistance

The Cobra Electronics Corporation line of quality products includes:

CB Radios microTALK Radar/Laser Detectors Safety Alert HighGear CobraMarine Power Inverters Accessories

Radios

Traffic Warning Systems

Accessories

VHF Radios

Owner’s Manual

Our Thanks to You

Thank you for purchasing a CobraMarine®VHF radio. Properly used, this Cobra

product will give you

many years of reliable service.

How Your CobraMarine VHF Radio Works

This radio is a battery-powered, portable transceiver for use afloat. It gives you two-way vessel-to-vessel and vessel-to-shore station communications, primarily for safety and secondarily for navigation and operational purposes. With it, you can call for help, get information from other boaters, talk to lock or bridge tenders, and make radiotelephone calls to anywhere in the world through a marine operator.

Customer Assistance

Should you encounter any problems with this product, or not understand its many features, please refer to this owner’s manual. If you require further assistance after reading this manual, please contact your local dealer.

•

Nothing Comes Close to a Cobra

For Warranty, Product Service and Accessory Information

For more information or to

order any of our products,

please visit our website:

www.cobra.com

English

VHF MARINE RADIO

MR HH475 FLT BT EU

Printed in China Part No. 480-552-P Version D

Nothing Comes Close to a Cobra

English

Please contact your local dealer or distributor. See the enclosed leaflet that provides contact information for the CobraMarine international distributors.

English

6500 West Cortland Street

Chicago, Illinois 60707 USA

www.cobra.com

Antenna

Backlit

Screen

Channel Up

Push to

Talk

Button

Channel

Down

Button

Backlight/

Key Lock

Button

Level Button

Tri-Watch

Button

Bluetooth

Button

Speaker

Introduction

LCD

Button

Power

Radio Controls and Indicators

Speaker/

Microphone

External Cover

ON/OFF/Volume Control

Wrist Strap

Connector

Bluetooth

Microphone

Instant Channel 16 Button

SCAN Button

Belt Clip

Engagement

Battery

Clip

Call/Enter Button

Memory/Escape Button

Rewind-Say-Again Button

VHF Radio Microphone

Backlit LCD Screen

Introduction

Backlit LCD (Liquid Crystal Display) Screen

Transmit and Receive Icons

Frequency

Band Icon

Active Channel

Numbers

Tri-Watch Icon

Button Lock Icon

Product Features

Power Settings*

Selectable power settings produce 1, 3 or 6 watts of output power for near or distant calling.

* Units sold in Australia will transmit

at 5 watts maximum.

International/Canada/USA Channels

Allows operation on any of the three (3) different channel maps established for these areas.

Submersible to JIS7 Standards

Waterproof to 1 m (3.3 ft) of water for 30 minutes.

Cobra Exclusive Rewind-Say-Again™

A dedicated button allows user to replay up to the last 20 seconds of audio. Press the dedicated rewind button and this Cobra VHF will replay the last 20 seconds of the audio from your VHF.

Button/Key Lock

Prevents accidental setting changes when button lock is set.

and Product Features

Scan Icon

Key Tone Icon

Simplex Operation Icon

Roger Beep Icon

UIC Active Channel Map Icons

Channel Scan/Memory Scan

Use to scan through unlimited channels or memory locations to find conversations in progress.

AA Battery Compatible

Can work at full power with six (6) AA alkaline batteries. Good for emergency backup. Use AA battery tray included (P/N CM 110-011).

Instant Channel 16

Provides instant access to priority Channel 16.

Tri-Watch

Use to monitor three (3) channels at once — Channel 16 and two (2) programmable channels.

Floating

This radio will float if dropped overboard. so it's easy to included battery to float.

Low/Medium/High Power Icons

Signal Level Icons

Call Tone Icon Memory Channel Icon Memory Channel and Other VOX Icon

Automatic Transponder Identification System Icon

Battery Power Icon

It has an orange stripe

retrieve.

Must use

Introduction

•

Product Features (continued)

MicroBlue

Bluetooth®Wireless Technology in a

unique noise canceling design. Widely compatible for all mobile phones with

Bluetooth

wireless technology.

AC and DC Charger Included

Use to charge battery pack, at home, in a car or in a boat.

Locking Desktop Charger

Holds the radio or battery in place while charging. Vertical or horizontal

•

mounting.

Call Tones (Selectable)

10 selectable call tones.

Speaker/Mic Jack

Allows connecting optional Cobra Lapel Speaker/Mic and other Cobra accessories.

Unlimited Memory Channels

Allows programming of unlimited VHF memory channels.

Signal Strength Meter

Shows the strength of incoming or outgoing signals.

Easy Redial Operation

Product Features

Voice Dialing

Supports standard mobile phone voice dialing when paired to a compatible mobile phone.

Noise Canceling Microphone

Reduces effect of environmental noise when speaking.

Illuminated Buttons

Allows high visibility of all function buttons.

Roger Beep Tone (Selectable)

Confirmation tone indicates the completion of the user’s transmission and signals to others it is clear to talk. On or Off selectable.

BURP

The Cobra BURP feature expels water from the speaker grill if the unit is dropped in the water or is subjected to extreme rain and weather.

Automatic Transponder Identification System (ATIS)

Capable of operating within the Automatic Transponder Identification System. ATIS includes data at the end of a transmission for station identification.

•

Redial of last phone number dialed.

English

Introduction

Table of Contents

Introduction

Our Thanks to You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1

Customer Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1

Radio Controls and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2

Backlit LCD (Liquid Crystal Display) Screen . . . . . . . . . . . . . . . . . . . . . . . . A3

Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3

Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Recommendations for Marine Communication . . . . . . . . . . . . . . . . . . . . . . 4

Licensing Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installation

Included in this Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Wrist Strap and Belt Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Batteries and Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Operating Your Radio

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Setup Mode Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Bluetooth

Mode Pairing and Programming . . . . . . . . . . . . . . . . . . . . . . . . 21

ATIS ID Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Standby/Receive and Transmit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Advanced Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Rewind Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Mobile Phone Operation with Bluetooth

. . . . . . . . . . . . . . . . . . . . . . . . . . 35

Floating Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Maintenance and Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

VHF Marine Radio Protocols

VHF Marine Radio Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Voice Calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Radiotelephone Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Emergency Messages and Distress Procedure . . . . . . . . . . . . . . . . . . . . . 44

Trademark Specifications and Accessories

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Trademark Acknowledgement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Appendix

VHF Marine Channel Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Declaration of Conformity and CE Marking . . . . . . . . . . . . . . . . . . . . . . . . 60

Nothing Comes Close to a Cobra

Introduction

Important Safety Information and General Precautions

Introduction

General Precautions

Important Safety Information

Before installing and using your CobraMarine VHF radio, please read these general precautions and warnings.

Warning and Notice Statements

To make the most of this radio, it must be installed and used properly. Please read the installation and operating instructions carefully before installing and using the radio. Special attention must be paid to the WARNING and NOTICE statements in this manual.

WARNING

Statements identify conditions that could result in personal injury or loss of life.

NOTICE

Statements identify conditions that could cause damage to the radio or other equipment.

General Precautions

The following WARNINGS and NOTICE information on the following page will make you aware of RF exposure hazards and how to assure you operate the radio within the recommended RF exposure limits established for the radio.

Changes or modifications to your radio MAY VOID its compliance with government rules and make it illegal to use.

•

WARNINGS

Your radio generates electromagnetic RF (radio frequency) energy when it is transmitting. To ensure that you and those around you are not exposed to excessive amounts of that energy, DO NOT touch the antenna when transmitting. KEEP the radio at least 5 cm (2 inches) away from yourself and others when transmitting.

DO NOT transmit more than 50% of the time the radio is in use — 50% duty cycle. The radio is transmitting when the Talk button is pressed and the transmit information shows on the LCD screen.

ALWAYS use only Cobra authorized accessories.

DO NOT operate the radio in an explosive atmosphere, near blasting sites,

or in any area where signs are posted prohibiting radio transmissions.

NEVER place the transceiver or microphone/speaker where they might interfere with operation of your vessel or cause injury.

DO NOT allow children or anyone unfamiliar with proper procedures to operate the radio without supervision.

•

Failure to observe any of these warnings may cause you to exceed recommended RF exposure limits or create other dangerous conditions.

NOTICE

Your radio is waterproof only when the batteries are properly installed.

AVOID using or storing the radio at temperatures below -20˚C (-4˚F ) or above 60˚C (140˚F ).

KEEP your radio at least 0,9 m (3 ft) away from your vessel’s magnetic navigation compass.

DO NOT attempt to service any internal parts yourself. Have any necessary service performed by a qualified technician.

This radio is supplied with a lithium-ion (LiON) rechargeable battery pack.

Use only the Cobra charger to recharge lithium-ion (LiON) batteries in the radio.

Do not short circuit the battery pack.

When replacing the batteries, dispose of the old batteries properly. Batteries

may explode if disposed of in a fire.

English

Nothing Comes Close to a Cobra

Introduction

Marine Communication and VHR Marine Radio Procedures

Introduction

Licensing Information

Recommendations for Marine Communication

The frequencies your radio uses are set aside to enhance safety afloat and for vessel navigation and operational messages over a range suitable for nearshore voyages. If the maximum output of your radio is not sufficient for the distances you travel from the coast, consider a higher powered handheld or installing a Cobra Marine fixed mount radio with up to 25 watts of output power. (Visit www.cobra.com or your local dealer for model availability.)

If traveling far offshore, you should consider adding even more powerful radio equipment such as HF single side band or satellite radio for your vessel.

The coastguard does not endorse mobile phones as substitutes for marine radios. They generally cannot communicate with rescue vessels and, if you make a distress call on a mobile phone, only the party you call will be able to hear you. Additionally, mobile phones may have limited coverage over water and can be hard to locate. If you do not know where you are, the coastguard will have difficulty finding you if you are using a mobile phone.

However, mobile phones can have a place on board where mobile coverage is available — to allow social conversations and keep the marine frequencies uncluttered and available for their intended uses.

VHF Marine Radio Procedures

If you are not familiar with or need to brush up on the protocols that must be followed when using a VHF Marine Radio, please study the section beginning at page 42 before putting your radio into service.

•

Licensing Information

The radio operates on all currently allocated marine channels and is switchable for

•

use according to International, Canadian or U.S.A. regulations. It features instant access to emergency Channel 16 by pressing one key.

Station License

The UK requires a ship’s radio license and a marine radio operator’s certificate before transmitting equipment can be used aboard a vessel. Other European countries have specific requirements of their own.

For detailed information and applications, contact the Radio Licensing Centre run by OFCOM in the UK. In other countries, contact the relevant national postal or telecommunications authority.

Canadian or U.S.A. Station License

If your vessel will be entering the sovereign waters of Canada or the U.S.A., you should contact Industry of Canada, Radio Regulatory Branch or the U.S. FCC (Federal Communications Commission) for licensing and operating information.

Radio Call Sign

•

A radio call sign is included as part of the ship’s radio license in the UK. Other countries may have different practices; contact your local regulatory authority for information.

User Responsibility and Operating Locations

All users are responsible for observing domestic and foreign government regulations and are subject to severe penalties for violations. The transmitting frequencies in your radio are reserved for maritime use; any frequency you use for transmission must be specifically included on your ships license. The VHF frequencies on your radio are reserved for marine use and require a special license to operate from land, including when your boat is on its trailer. The use of ATIS is prohibited outside the European inland waterways covered by the Basel Agreement.

English

Nothing Comes Close to a Cobra

VHF Marine Radio Protocols

Installation

Included in this Package

VHF Marine Radio Protocols

Installation

Wrist Strap and Belt Clip

Included in this Package

You should find all of the following items in the package with your CobraMarine VHF radio:

Radio Wrist Strap Drop-In Battery Charger

Battery Charger Power Cord

For connection to 12-volt and AC power sources.

Operating Instruction Manual Spring-Loaded Belt Clip

LiON Battery Pack

Alkaline Battery Tray

•

Wrist Strap and Belt Clip

Wrist Strap

•

The radio comes with the wrist strap already attached. It can be easily removed if you choose not to use it.

Belt Clip

Belt Clip Secured to Belt

Insert Knob onto Belt Clip

Secure Radio

Use the spring-loaded belt clip to carry the radio on your person.

1. Press open the belt clip, slide it over the belt and release the clip.

2. Insert the round guide on the back of the radio into the guide channel on the back of the belt clip. The radio must be upside-down, as shown, to remove it from the belt clip.

3. Once the knob is inserted all the way into the belt clip channel, the radio swings free but remains secure.

English

Nothing Comes Close to a Cobra

VHF Marine Radio Protocols

Installation

Batteries and Charger

VHF Marine Radio Protocols

Installation

Batteries and Charger

LiON Battery Pack

Install Battery Pack

The radio is shipped with a sealed lithium-ion (LiON) battery pack (P/N CM 110-021) that is rechargeable.

WARNING

The charger provided for this radio is only to be used to charge the battery pack provided. Do not charge any other type of batteries in the charger as fire, explosion or battery damage will occur. Avoiding extreme room temperatures will also help prolong the life of the battery pack for the radio.

When your rechargeable batteries begin to discharge too quickly, it is time to install a new battery pack. Your radio will also operate with six (6) high-quality AA alkaline batteries, using the included alkaline battery tray.

Installing the Battery Pack

1. Position the battery pack to line up the two (2) external alignment tabs to the alignment slots in the radio.

2. Engage the battery pack into the radio until battery pack is fully seated against the radio housing.

3. Pivot the locking tab up until it snaps into place on the back of the battery pack.

•

Power Sources

Initial Charge

The Cobra-provided LiON battery pack may be charged at home, in a car or in a boat using the appropriate 12V DC power cord with the charger.

1. Insert one (1) of the power cords into the back of the drop-in charger.

2. Insert the other end of the power cord into the appropriate 12V DC or 220V AC power source. The wall charger should

Initial Battery Charge

be installed near the equipment and easily accessible.

3. Remove the spacer from the charger and insert the entire radio/battery into the charger. The metal charge contacts on the battery will contact the mating prongs in the charger to transfer the charging current.

4. Observe that the red light on the front of the charger glows to indicate that the battery pack is properly seated and the charger is operating.

5. Allow the batteries to charge for five (5) to six (6) hours before use. The light will change back to green when the battery is fully charged.

WARNING

Only the rechargeable LiON battery pack can be recharged. You MUST use one of the charging devices provided with this radio. Do not substitute any other type of charging adapter or charger base for this radio. Battery damage, fire or explosion may result. It is equally important to prevent the lithium-ion (LiON) battery pack from freezing to obtain best performance from the battery pack.

English

NOTE

If the drop-in charger is used on a boat, Cobra recommends you attach it to a horizontal shelf or vertical bulkhead (using the screw holes provided) to prevent possible damage due to the boat rolling or pitching. The charging base has been designed to hold the battery pack in place during rough sea conditions.

Nothing Comes Close to a Cobra

VHF Marine Radio Protocols

Installation

Batteries and Charger

VHF Marine Radio Protocols

Installation

Batteries and Charger

Locking Tab

Battery Pack Charging Only

Alkaline Battery Tray

To Remove Battery Pack from Radio

1. Pivot the locking tab off of the back of the battery pack to unlock.

2. Lift the bottom of the battery pack slightly to remove it from the radio housing.

3. Pull battery pack out of the radio housing.

NOTE

The LiON battery pack can also be charged in the battery charger without being installed in the radio. Insert the spacer into the battery charger to support the battery pack during this charging process. Follow the same procedures in “Initial Charge” to charge the battery pack.

NOTICE

Lithium-ion (LiON) batteries are toxic. Please dispose of properly. Some marine suppliers accept old battery packs for recycling and some municipal waste disposal agencies have special provisions for battery disposal.

Alkaline Batteries

There is an alkaline battery tray (P/N CM 110-011) provided with this radio. The alkaline battery tray is provided as a backup or “Emergency” power source should the battery pack run low on power and needs to be recharged. The radio will transmit at full power when using six (6) new AA Alkaline batteries.

Fully Charged

Partially Charged

Fully Discharged

Maintaining the Battery Charge

As you use your radio, the battery power icon will show the battery power remaining. When the icon begins to flash, it is time to recharge or change the batteries.

NOTICE

Use only the drop-in charger provided by Cobra. Do not use the charger with alkaline batteries; only the LiON battery pack is rechargeable. Spent alkaline batteries must be discarded and replaced.

It is a good idea to keep a set of fresh, high-quality AA alkaline batteries with your radio. Should the rechargeable battery pack become discharged and no electrical power source is available, you can insert the included alkaline battery tray with fresh alkaline batteries and continue to use your radio.

NOTE

Some radios with LiON batteries have AA or AAA battery packs which only allow low-power transmit. The AA battery tray included with the HH475 and a fresh set of alkaline batteries will allow for full-power emergency transmissions.

English

WARNING

Never attempt to recharge alkaline batteries. They are not made to be recharged, and should be disposed of in a proper manner.

Nothing Comes Close to a Cobra

VHF Marine Radio Protocols

Operating Your Radio

Getting Started

VHF Marine Radio Protocols

Operating Your Radio

Getting Started

HH475 Radio

Refer to the foldout at the front of this manual to identify the various controls and indicators on your radio. Throughout this manual you will be instructed to “Press” or to “Press and hold” various buttons (except “Push to Talk”) on the radio. “Press” means a momentary press of approximately one (1) second. “Press and hold” means to hold the button down for approximately two (2) seconds.

Whenever you press any button except the Talk button on your radio, a brief tone (beep) will sound to confirm the button press. With all button presses, the appropriate icon will appear on the LCD and the backlight will turn On. The backlight will stay On for 10 seconds after the button is released.

At times, you will hear two (2) other sounds. Two (2) beeps will sound to confirm your setting changes and three (3) beeps will sound to notify you of an error.

Common Radio Functions

The following procedures define common operating functions of the radio when in Marine Standby mode.

On/Off/Volume Control (Clockwise)

On/Off/Volume Control (Counterclockwise)

Power/Volume Control

Power On/Off Control

The On/Off/Volume control is located at the upper right side of the radio. Turning the On/Off/Volume control past the detent position will turn the radio On or Off.

Volume Control

Volume is controlled by turning the On/Off/Volume control.

n To increase the volume, turn the On/Off/Volume

control clockwise.

n To decrease the volume, turn the On/Off/Volume

control counterclockwise.

•

Speaker/Mic Port

Radio Speaker and Microphone

The internal Radio Speaker and Microphone are located on the bottom front face of the radio below the lower control buttons.

An optional Speaker/Microphone port is located at the top of the radio between the antenna and the Power/Volume control. Unthread the Speaker/Microphone port cover to access and install an optional speaker or microphone into this port.

Talk Button

Press and hold the Talk button to transmit messages. Release the Talk button to stop transmitting.

English

Nothing Comes Close to a Cobra

VHF Marine Radio Protocols

Operating Your Radio

Getting Started

VHF Marine Radio Protocols

Operating Your Radio

Getting Started

Backlight/Key Lock Button

Key Locked Buttons

Key Lock Icon

Backlight/Key Lock Button

The LCD will be illuminated by the backlight as long as any button is pressed and will remain On for 10 seconds after the button is released.

To Display the Backlight Momentarily:

Press the Backlight/Key Lock button. The backlight will remain On for 10 seconds. If the backlight is already On, another press of the Backlight/Key Lock button will turn it Off.

Key Lock

To prevent accidental changes to your settings, you can lock all of the following buttons:

n Channel Up Button n Channel Down Button n SCAN Button n MEM/ESC Button n H-M-L Button n 16 Button n TRI-WATCH Button n Call/Enter/Setup Button

To Lock or Unlock the Buttons:

Press and hold the Backlight/Key Lock button for two (2) seconds. The Key Lock icon will appear or disappear in the LCD. When Key Lock is On, pressing any of the listed buttons on the front of the radio will result in a three (3) beep error message.

Both the Backlight/Key Lock button and the Talk button are active — you can Receive (Rx) or Transmit (Tx) a message with Key Lock On, but you cannot change the channel.

Channel Up/Down Buttons

Currently On Channel 88

SCAN Button

Channel Up/Down Buttons

Your radio will Receive (Rx) and Transmit (Tx) VHF signals on the channel indicated on the LCD display. You can change the channel at any time using the Channel Up/Down buttons.

To Change Channels:

Press the Channel Up/Down button. If you are on Channel 88, pressing the Channel Up

button will advance to Channel 01. If you are on Channel 01, pressing the Channel Down button will advance to Channel 88.

You can press and hold the Channel Up/Down button for fast advance. The beep sound will occur only at the first press of the button and not during fast advance.

If the new channel selected is restricted to low power, the radio will automatically switch to Low Power mode and the Low Power icon will appear on the LCD.

If the radio is in the Key Lock mode, the channel will not change and the three (3) beep error signal will sound.

SCAN Button

Press and release the SCAN button to scan all channels. The SCAN icon will display on the LCD display. Scanning begins

at lower channels, and scans to higher channels. Press the Channel Up/Down button to change the scan direction.

When a signal is received in SCAN mode, the radio will pause 10 seconds before resuming SCAN operation. The scan will stop when the Talk button is pressed.

In Memory mode, press and release the SCAN button to scan all memory channels. Because the unit is already in the Memory Channel mode, only the channels in the memory bank will be displayed.

NOTE

Memory channels need to be saved to effectively enter the Memory Channel mode and scan all memory channels.

English

Nothing Comes Close to a Cobra

VHF Marine Radio Protocols

Operating Your Radio

Getting Started

VHF Marine Radio Protocols

Operating Your Radio

Setup Mode Programming

H-M-L Power Button

Call/Enter/Setup Button

High/Medium/Low (H-M-L) Power Button

Your radio can transmit selectively at 1, 3 or 6 watts of power (5 watts maximum in Australia). Cobra suggests you maintain the low power setting for short-range communications. You will conserve battery life and avoid overpowering nearby stations with a low power setting signal. Use the high power setting for long-range communications or when you do not receive a response to a signal sent at 1 watt.

To Toggle Between H-M-L Power Modes:

Press the H-M-L Power button. The LCD will show which mode is in effect. Some channels are restricted for a maximum use of 1 watt. Your radio will automatically set the power to Low Power mode when you select those channels.

NOTE

Some channels, frequency bands and countries of use

might not be able to operate in High Power mode.

Call /Enter/Setup Button

The Call/Enter/Setup button has multiple functions. It is generally used in the following ways:

n Press and release to transmit your unique Call Tone signal

to another radio.

n Press and hold to enter any Setup menu. n Functions as an Enter button when making a selection

in any Setup menu.

Setup Mode Programming

The following series of procedures is designed to allow you to set the programmable features of your radio. Correctly following these steps results in a minimal amount of radio setup programming time.

NOTE

When in the Setup mode, if you stop programming for longer than 15 seconds, your entry will be saved and the radio will go back to the Marine Standby mode. When you return to Setup mode and continue programming you will see the last “value” displayed. While in the Setup mode, you will not receive any signal reception.

Marine (VHF) Mode Programming

Programming these features will allow you to customize certain features of this radio to enhance your “On-Water” audio needs.

Start from Marine Standby mode to begin Marine (VHF) Setup programming. Press and hold the Call/Enter/Setup button for two (2) seconds to enter the programming mode.

The mode programming follows this sequence:

n Squelch Level Set n Channel Map n Tone Alert On/Off n Call Tone Select n Roger Beep On/Off n Key Tone On/Off n ATIS On/Off (Displayed only when ATIS enabled)

•

English

Nothing Comes Close to a Cobra

VHF Marine Radio Protocols

Operating Your Radio

Setup Mode Programming

VHF Marine Radio Protocols

Operating Your Radio

Setup Mode Programming

Channel Up/Down Buttons

Squelch Control

Squelch Control filters weak signals and radio frequency (RF) noise so that you will clearly hear the signals you want. The Squelch Control on this radio is set through the following keypad operation.

To Set Squelch Control:

1. With the power On, press and hold Call/Enter/Setup button to access the Setup menu.

2. Squelch control will be the first menu item to appear.

Press the Channel Up and Channel Down buttons to set level. The signal level bar graph shows squelch level while you are in Setup mode on the squelch adjust function.

3. To tune your squelch, press the Channel Down button until you hear a hissing sound, then press and release the Channel Up button until the hissing stops. This will establish a “Baseline” squelch.

4. By pressing the Channel Up button further, you will filter weak and medium strength signals. By pressing Channel Down button, you will receive weaker signals.

5. Press the Call/Enter/Setup button to save this entry and move to the next Setup mode programming.

NOTE

If the Squelch is set so that you can hear a continuous hissing sound, the Memory Scan and Tri-Watch functions will be blocked.

Active Channel Map Icon

Channel Up/Down Buttons

Call Tone Alert

International/Canada/USA Channel Maps

Three (3) sets of VHF Channel Maps have been established for marine use: International, Canada and USA. Most of the channels are the same for all three (3) maps, but there are definite differences (see table in the Apendix on page 50). Your radio has all three (3) maps built into it and will operate correctly in whichever area you choose.

To Set Channel Map Operating Area:

1. The Channel Map mode is the second mode on the Marine (VHF) Setup programming.

2. U, I and C will display, with the current setting (the I icon is the default) flashing.

3. Press Channel Up/Down button to select the I, C or U icon.

4. Press Call/Enter/Setup button to save this entry and move to the next Setup mode programming.

NOTE

One or two of the channel maps might have been

disabled for sales of this radio in some countries.

Call Tone Alert

If Call Tone Alert is set to On, the radio will alert you to a call from a compatible Cobra radio with a Call Alert.

To Set Call Tone On or Off:

1. Display will show Call Tone icon and ON or OFF

flashing.

2. Press Channel UP/Down button to select ON or OFF.

3. Press the Call/Enter/Setup button to save this entry

and move to the next Setup mode programming. The Call Tone icon will show in the Standby mode when set to ON.

English

Call Tone Select

This setting will also allow you to transmit a unique Call Tone alert to identify your radio when you transmit messages. You can select from one of 10 different Call Tone signals.

Nothing Comes Close to a Cobra

VHF Marine Radio Protocols

Operating Your Radio

Call Tone Select

Roger Beep Mode

Key Tone Mode

ATIS Mode

English

Setup Mode Programming

Call Tone Select continued

To Set Call Tone:

1. From the previous press of the Call/Enter/Setup button, the LCD will display the letter “C” and the current Call Tone number (01 through 10).

2. Press the Channel Up/Down button to select a different Call Tone. An example of each call tone will sound for

1.5 seconds.

3. Press Call/Enter/Setup button to save this entry and move to the next Setup mode programming.

NOTE: Call Tones are not usually used for Marine VHF communications. We allow you to turn it On for

your unique communication needs.

Roger Beep Mode

In Roger Beep mode, your listener will hear an audible tone when you release the Talk button. This alerts your listener that you are finished talking and it is OK for them to speak.

To Set Roger Beep On or Off:

1. Display will show ROG icon and ON or OFF flashing.

2. Press Channel Up/Down button to select ON or OFF. ROG will be displayed when On.

3. Press Call/Enter/Setup button to save this entry and move to the next Setup mode programming.

Key Tone Mode

In Key Tone mode, an audible tone will sound each time a button is pressed or you change a setting.

To Set Key Tone On or Off:

Display will show Key Tone icon and ON or OFF flashing.

2. Press Channel Up/Down button to select ON or OFF.

3. Press Call/Enter/Setup button to save entry.

ATIS Mode

ATIS mode allows control over ATIS packet transmissions. This mode is only visable after initial ATIS set-up (see page 25).

To Set ATIS On or Off:

Display will show ATIS icon and ON or OFF flashing.

2. Press Channel Up/Down button to select ON or OFF.

3. Press Call/Enter/Setup button to save entry.

You have now ended Marine (VHF) Setup mode programming and will enter Marine Standby mode.

NOTE: Scan and Tri-Watch features are not available when ATIS is on.

Bluetooth®Mode Pairing

VHF Marine Radio Protocols

Operating Your Radio

Bluetooth®Mode Pairing and Programming

Bluetooth®wireless technology is a standard which has been developed for use

in mobile phones and other devices. This radio can be wirelessly linked to your mobile phone if your mobile phone also has Bluetooth. This process of linking your mobile phone and this radio is called “Pairing.” Once paired, this radio can act as the speaker and microphone of your mobile phone while your phone is stowed in a safe and dry location.

This programming section shows you how to complete the pairing process. It also shows you how to change some settings related to the Bluetooth functionality of your radio.

Bluetooth Standby Mode, Unpaired State

Bluetooth Standby Mode, Paired State

Bluetooth Pairing Mode Sequence

and Programming

Pairing Your Mobile Phone:

1. Press and release the Bluetooth button to enter Bluetooth Standby. The LCD will change from VHF Standby mode display to Bluetooth Standby mode display. The word “bLUE” will be shown on the display and the blue keypad backlight will come On.

2. Press and hold the Bluetooth button on the HH475BT for four (4) seconds [until the radio beeps four (4) times] from the Bluetooth Standby mode. The blue backlight will flash for some time. Your radio is now in a “Pairing Mode” and can be “found” by your phone.

While in pairing mode, the LCD will display the sequence as shown in the illustration below.

3. Follow the mobile phone’s instructions to search for available pairing with another Bluetooth device. This can often be found in the Tools or Settings menu of your mobile phone.

Enter the “P.I.N.” (Personal Identification Number 0000), on your mobile phone when prompted. Wait for the pairing process to complete.

Nothing Comes Close to a Cobra

Operating Your Radio

Bluetooth®Mode Pairing

and Programming

Operating Your Radio

Bluetooth®Mode Pairing

and Programming

Bluetooth Pairing

4. You will then see a confirmation of successful pairing or a notice to try again if pairing did not occur. The LCD will briefly display the word “PairEd.”

NOTE

This process only needs to be completed for first time operation. From then on, as long as your mobile phone is within 10 meters (30 feet) of the radio, the

Bluetooth Standby Mode

two units will “Pair” automatically. A “P” will now be displayed if you press the Bluetooth button and enter the Bluetooth Standby mode.

Bluetooth Mode Programming

The default settings for how your radio answers and conducts Bluetooth mobile phone calls can be adjusted.

VOX

VOX On or Off

The

VOX

function converts the radio microphone’s pickup of

your voice from being controlled by the PTT button to being

VOX

activated by your voice. When

is On, the PTT button does not need to be pressed to transmit your voice, and you can just speak into the microphone.

VOX

When

is Off, you need to press the PTT button while

speaking.

To Change Between VOX On and Off:

From the

Bluetooth

Standby mode, press and hold Call/Enter/Setup button to access the Setup menu. VOX On/Off will be the first menu item to appear.

Press the Channel Up and Channel Down buttons.

The display will show the selection of either ON or OFF.

3. Press the Call/Enter/Setup button to confirm your selection and move to the next Setup mode programming.

Call Tone Alert

If Call Tone Alert is set to On, the radio will “ring” with one of your Cobra selected tones when you receive a call on your mobile phone. If Call Tone Alert is set to Off, the radio will ring with the default ring tone.

To Set Call Tone On or Off:

Display will show Call Tone icon and ON or OFF flashing. VOX On/Off will be the first menu item to appear.

Press Channel UP/Down button to select ON or OFF.

3. Press the Call/Enter/Setup button to save this entry

and move to the next Setup mode programming. The Call Tone icon will show in the Standby mode when set to ON.

Call Tone Select

Call Tone Select (Ring Tones)

This setting controls what ring tones is used to alert for incoming calls on your mobile phone. Ten different ring tones are available from which to choose.

•

To Set Call Tone:

From the previous press of the Call/Enter/Setup button, the LCD will display the letter “C” and the current Call Tone number (01 through 10).

Press the Channel Up/Down button to select a different Call Tone. An example of each call tone will sound for

1.5 seconds.

3. Press Call/Enter/Setup button to save this entry and move to the next Setup mode programming.

English

Nothing Comes Close to a Cobra

Operating Your Radio

Bluetooth®Mode Pairing

and Programming

Operating Your Radio

ATIS ID Programming

Bluetooth Radio On

Bluetooth Radio Off

Bluetooth Radio On/Off

This setting allows you to turn On and Off the small Bluetooth radio inside this VHF radio. The default setting is ON. Turning it Off can save some power. It can easily be switched On at any time.

To Set Bluetooth On and Off:

Display will show the word blue and ON or OFF flashing.

Press Channel UP/Down button to select ON or OFF.

3. Press the Call/Enter/Setup button to save this entry.

You have now ended Bluetooth Setup mode programming and will enter ATIS ID programming.

ATIS ID Programming

The Automatic Transmission Identification System (ATIS) feature of this Cobra radio is used to identify marine vessels in some inland waterways of European countries that require ATIS transmission. An ATIS ID number is required to operate the ATIS feature. The ATIS ID number is derived from your vessels call sign. You must enter your ATIS ID number into this radio before the ATIS system will become functional.

Please consult your local dealer for questions about local ATIS requirements. The use of ATIS is prohibited outside the European inland waterways covered by the Basel Agreement.

With this feature activated the vessels ATIS ID number is transmitted after every push of the Talk button.

Channel Down

and SCAN Buttons

To Set the ATIS ID Number:

NOTE

The ATIS ID is a 10 digit number that will always begin with the number “9.” You will be asked to enter only the last nine digits. The first digit, “9”, has been automatically entered for you.

1. With the radio turned Off; press and hold the Channel

ATIS ID Start Screen

Down and SCAN buttons and simultaneously power On the radio.

2. The LCD will display and flash the ATIS icon. A dash (-), to the right of the digit “9”, will be flashing for the next entry.

NOTICE Remember, you only have one (1) attempt

Channel Up/Down Button

ID number. Once this number has been entered, only your Cobra distributor can reset the ATIS ID number. You can also return the radio to Cobra for reprogramming.

•

to set the ATIS

English

ATIS ID Number Entry

3. Press the Channel Up/Down button to scroll through the specific ATIS digit being entered.

4. Pressing the Call/Enter/Setup button advances to the right, one (1) digit, for the next entry.

5. Repeat this input sequence until all nine digits have been entered. The ATIS icon will stop flashing when a successful ATIS ID entry has been made.

6. Press the Call/Enter/Setup button again, after all numbers have been entered, to save the ATIS ID number and return to the Marine Standby mode.

Nothing Comes Close to a Cobra

VHF Marine Radio Protocols

Operating Your Radio

Standby/Receive and Transmit

VHF Marine Radio Protocols

Operating Your Radio

Advanced Operation

Standby/Receive and Transmit

Marine Standby and Receive (Rx) Mode

Marine Standby mode is the default mode for the radio whenever it is turned on. From this mode, you can change current settings by becoming familiar with the different key functions in Marine Standby mode. While in Marine Standby mode, the user will be able to transmit by pressing the Push to Talk (Talk) button. Signals in

Receive (Rx) mode will be received on the selected channel(s).

NOTE

Coastguard alerts are broadcast on Channel 16. While in Marine Standby mode, you will receive any messages sent on the channel to which you are tuned.

Check Channel Number

Low Power Mode

Talk Button

Transmit (Tx)/Receive (Rx) Icons

English

Transmit (Tx) Mode

Transmit (Tx) mode gives you the ability to interact with safety services, other vessels and shore stations. When you use this capability, be sure to follow the procedures and to observe the courtesies that govern its use so everyone benefits. See Appendix to help you select the proper channels.

To Transmit a Message:

1. Check to see that your radio is set to a proper channel

for the type of message you plan to send.

2. Toggle to the Low Power setting.

3. With the microphone about 5.0 cm [2 in.] from your

mouth, press and hold the Talk button and speak into the microphone. The Transmit icon will appear on the LCD.

4. Release the Talk button when you are finished speaking. Your radio can only operate in either Transmit (Tx) or Receive (Rx) mode at any given time. You will not hear the response to your message unless the Talk button is released. If the Battery Power icon begins blinking on the LCD when the Talk button is pressed, the radio will NOT transmit.

NOTE

If the Talk button is held down for five (5) minutes, the radio will automatically sound a series of beeps and cease transmitting to prevent unwanted signal generation and battery drain. As soon as the Talk button is released, it can be pressed again to resume transmission.

•

Advanced Operation

Channel 16 Button

Channel 16 Mode

•

Channel 16 mode gives you quick access to calling on Channel 16 from any operational mode.

To Switch to Channel 16:

1. Press the Channel 16 button to change to

Channel 16.

2. Press the Channel 16 button a second time and

Channel 16

TRI-WATCH Button

return to the last used Standby channel.

Tri-Watch Mode

Tri-Watch mode gives you one (1) button access to scan a total of three (3) channels of most importance to you. Channel 16 is preprogrammed and will always be one (1) of the scanned locations. Two (2) other channels of your choice can be stored in the radio. These channels can be edited and/or recalled during future engagements of Tri-Watch mode.

TRI and MEM Icons

NOTE

The radio must be squelched for Tri-Watch mode to function. See page 18 for Squelch procedure.

Tri-Watch Setup

To Program or Edit the Tri-Watch Channels:

1. Press and hold the TRI-WATCH button for two (2) seconds to activate Tri-Watch Setup mode. The TRI and MEM icons on the display will turn On.

NOTE

The main channel number will flash to indicate channel position. If there is no input activity for 15 seconds, the radio will sound two (2) beeps and return to Marine Standby mode.

Nothing Comes Close to a Cobra

VHF Marine Radio Protocols

Operating Your Radio

Advanced Operation

VHF Marine Radio Protocols

Operating Your Radio

Advanced Operation

Channel Up/Down Button MEM/ESC Button

2. Press Channel Up/Down button to select the desired Tri-Watch channel.

3. Press and release TRI-WATCH button or Call/Enter/Setup button to confirm entry.

4. Repeat steps 2 and 3 to program the remaining additional Tri-Watch memory channel.

5. After programming both Tri-Watch memory

TRI-WATCH Button

channels the radio will immediately engage Tri-Watch mode.

Using Tri-Watch

Memory Location Number

Tri-Watch Scan Mode:

1. From Marine Standby mode, press the TRI-WATCH

button. The TRI icon will appear on the LCD display and the radio will scan through the three (3) Tri-Watch memory channels.

Channel Up/Down Buttons

2. A signal on any one (1) of the three (3) channels will

Tri-Watch Scan Mode

stop the scan for 10 seconds to allow you to listen to the traffic on that location.

NOTE

After the Tri-Watch scan stops to monitor a channel, as long as you do not press any buttons within 10 seconds, your radio will automatically resume scanning the Tri-Watch channels.

Channel Number

3. Press the Channel Up/Down button to resume scanning the Tri-Watch channels or to change the scan direction.

4. To EXIT the Tri-Watch scan, press the TRI-WATCH button again. The TRI icon will disappear from the LCD and the radio will return to Marine Standby mode.

Memory Location Mode

Your radio has unlimited memory locations for storing your most frequently used channels. These memory locations can be selected individually or can be scanned. (See page 32 under Memory Location Scan.)

To enter Memory mode, press MEM/ESC button. The display will show the MEM icon and the Memory Channel bank will be activated and displayed.

To Program Memory Locations:

1. Press and hold the MEM/ESC button for two (2)

seconds. The memory location number will start flashing and the MEM icon will be turned On.

2. Use the Channel Up/Down button to advance to the memory location (00-99) you want to program.

3. Press the MEM/ESC button to select the memory location. The memory channel number will stop flashing and the channel number will start flashing.

4. Use the Channel Up/Down button to change to the channel you want to store into the selected memory location.

5. Press the MEM/ESC button to program that channel. The memory location number will flash again.

Repeat steps 2 through 5 to program as many additional memories as you want.

6. Press and hold the MEM/ESC button for two (2) seconds. This will return the radio to Memory mode.

7. Press and release the MEM/ESC button again to return to Marine Standby mode.

English

Nothing Comes Close to a Cobra

VHF Marine Radio Protocols

Operating Your Radio

Advanced Operation

VHF Marine Radio Protocols

Operating Your Radio

Advanced Operation

MEM Icon

To Recall a Stored Memory Location:

1. Press the MEM/ESC button. The MEM icon will be

turned On.

2. Press the Channel Up/Down button to select the memory location. If a memory location has been programmed, its associated channel will display on the LCD. Your radio is now in Marine Standby mode on the selected memory location.

To Exit Memory Location Mode: Press the MEM/ESC button to return the radio to

Marine Standby mode. The last channel used in Marine Standby mode will now be displayed on the LCD and the MEM icon will disappear.

To Erase Stored Memory Locations:

1. Press and hold the MEM/ESC button for two (2)

seconds. The memory location number will start flashing and the MEM icon will be turned On.

2. Use the Channel Up/Down button to advance to the memory location you want to erase.

3. Press the MEM/ESC button to select the memory location. The memory channel number will stop flashing and the channel number will start flashing.

4. Use the Channel Up/Down button to change to the channel to read “00” at the selected memory location.

5. Press the MEM/ESC button to erase that channel.

Repeat steps 2 through 5 to erase as many additional memories as you want.

6. Press and hold the MEM/ESC button for two (2) seconds. This will return the radio to Memory mode.

7. Press and release the MEM/ESC button again to return to Marine Standby mode.

Scanning

SCAN Button

SCAN Icon

Channel Up/Down Buttons

Channel Scan Mode

During Channel Scan mode, the radio will rapidly switch from channel to channel through all the channels.

NOTE

The radio must be squelched for Channel Scan mode

to function. See page 18 for Squelch procedure.

To Enter Channel Scan:

1. From Marine Standby mode, press the SCAN button.

The radio will immediately begin to scan the entire channel map selected in the active channel map. The SCAN icon will show on the LCD.

2. A signal on any channel will stop the scan for 10 seconds to allow you to listen to the traffic on that location.

3. Press the Channel Up/Down button to resume scanning the Channel Scan channels or to change the scan direction.

4. To EXIT Channel Scan mode, press the SCAN button again. The SCAN icon will disappear from the LCD and the radio will return to Marine Standby mode.

English

Nothing Comes Close to a Cobra

Operating Your Radio

Advanced Operation

VHF Marine Radio Protocols

Operating Your RadioVHF Marine Radio Protocols

Rewind Operation

Memory Location Scan

MEM/ESC Button

SCAN Button

Memory Location Scan Mode

During Memory Location Scan mode, the radio will rapidly scan through all pre-assigned memory channels.

NOTE The radio must be squelched for Memory Location

Scan mode to function. See page 18 for Squelch

procedure.

NOTE

If there are fewer than two (2) memory locations programmed in the radio, the Memory Location Scan option will not be available. To program at least two (2) memory locations, see page 29.

To Enter Memory Location Scan:

1. From Marine Standby mode, press the MEM/ESC

button.

2. Press the SCAN button. The radio will immediately begin to scan all pre-assigned memory channels. The SCAN and MEM icons will show on the LCD.

3. A signal on any channel will stop the scan for 10 seconds to allow you to listen to the traffic on that location.

4. Press the Channel Up/Down button to resume scanning the Memory Location Scan channels or to change the scan direction.

5. To EXIT Memory Location Scan mode, press the SCAN button again. The SCAN and MEM icons will

disappear from the LCD and the radio will return to Marine Standby mode.

Rewind-Say-AgainTMFeature

Rewind-Say-Again

Rewind Button

Playback Message

Use the Cobra exclusive Rewind-Say-AgainTMfeature to replay or record the last 20 seconds of an incoming audio transmission.

Example 1:

When engine noise, music or conversation creates too much noise to hear an inbound message clearly, press the REW button to hear the message a second time.

Example 2:

When listening to an urgent distress message of an excited caller with confusing background noise, press the REW button to hear the message a second time and get life saving information. Use this feature to record call details including position coordinates, call signs, registration numbers and store details that will help authorities locate the distressed vessel.

NOTE

Hold the Rewind button to turn the recording mode

Off and save the currently recorded transmission.

Using Rewind-Say-Again

1. During audio transmission, press REW button

to listen to 20 seconds of the last recorded audio transmission. The REW icon will flash during the playing back of the message and a 20-second countdown begins.

2. Press the TALK, REW or MEM/ESC button during playback to stop the playback transmission. The radio returns to Marine mode.

English

Nothing Comes Close to a Cobra

Operating Your Radio

SCAN Button Enter Record

Rewind Countdown Timer

Rewind Operation

Using Rewind-Say-Again Transmission:

1. Press and hold SCAN button for two (2) seconds to enter Record mode.

2. Press and hold TALK button to begin recording

from radio microphone. If TALK button is released, recording stops. While recording, a 20-second countdown begins on display. When 20-second countdown time has ended, recording stops and two (2) beep tones will be heard.

3. Press and hold SCAN button again for two (2) seconds or press MEM/ESC button to cancel recording and return to last operation.

NOTE

When using radio in Record mode, the REW feature is turned Off to prevent “recording over” previous message.

to Record Audio

Mobile Phone Operation

VHF Marine Radio Protocols

Operating Your RadioVHF Marine Radio Protocols

Mobile Phone Operation with Bluetooth

NOTE

Please refer to the Bluetooth Mode Pairing and Programming section on page 21 for instructions on how to pair your mobile phone with this device, change ring tones, etc. The following section covers how to complete a phone call and other basic operations.

Answering a Call

Bluetooth Button

Connected to a Call

With Bluetooth

Answer Incoming Phone Calls

This handheld radio, once properly paired to your Bluetooth compatible mobile phone, can answer incoming calls received on your mobile phone. It can act as the speaker and microphone, while your mobile phone stays safe and dry. It will also improve audio quality on both ends of the conversation.

To Answer and End an Incoming Call:

1. The speaker on the HH475 will ring. The display will

change and show the word “AnSEr” as shown.

2. Press and release the Bluetooth button on the MR HH475BT front panel. After the call is answered, the LCD will switch to “Connct” as illustrated.

3. Begin conversation with the caller by a pressing the PTT (Push to Talk) key and speaking into the small

microphone above the LCD. This is very similar to a standard radio operation and it completely eliminates all background noise when you are not speaking.

English

NOTE

To enable hands free conversation or “VOX” mode (pressing in the PTT key not required), use the Channel Up and Channel Down keys anytime when in Bluetooth mode. The “VOX” icon will turn on when VOX mode is enabled.

The Bluetooth “VOX” setting does NOT reset to Off after a power cycle unlike the normal VOX associated with VHF mode.

4. To end a call, press and release the Bluetooth button. The HH475 will then return to previous Standby mode and resume normal operation.

Nothing Comes Close to a Cobra

Operating Your Radio

Mobile Phone Operation With Bluetooth

VHF Marine Radio Protocols

Operating Your RadioVHF Marine Radio Protocols

Mobile Phone Operation With Bluetooth

Initiating a Call

Connected to a Call

Initiate a Phone Call

There are several ways to initiate a call. These include; initiating (as normal) from the mobile phone, using voice dialing and last number redial.

To Initiate from the Mobile Phone

1. Simply dial a number on your mobile phone.

(See manufacturer’s instructions for making a call.) When the phone’s Send key is pressed, the HH475 will respond by changing over to Bluetooth mode and displaying “diaLng” as illustrated.

2. You will see “Connct” when the receiving party, or their voice mail, answers.

3. To end a call, press and release the Bluetooth button. The HH475 will then return to previous Standby mode and resume normal operation.

Initiating a Voice Dial Call

Connecting a Voice Dial Call

Using Voice Dial

This feature allows you to use your voice to dial a contact from the contact list on your mobile phone.

NOTE

Voice dialing is an advanced function and may not be supported by all phones. Cobra suggests you set it up and become familiar with it on your mobile phone before you attempt using it in conjunction with the HH475 or another Bluetooth device.

This is an advanced function and not all mobile phone combinations will be successful. Some allow you to set pre-recorded contacts. Some advanced phones have active voice recognition and match your mobile phone’s contact list.

To Initiate a Voice Dial Call:

1. Press and release the Bluetooth button to get into the Bluetooth Standby mode.

2. Press and release the Bluetooth button twice (2x)

from Bluetooth Standby mode. This will initiate the voice dial feature on the paired mobile phone.

3. You will hear a beep or audio command from the phone. Press and hold the PTT (Push to Talk) button and speak the name into the HH475.

4. The mobile phone will begin to dial the contact it “recognizes.” The call will be complete through the speaker and microphone of the HH475. You will see the “diaLng” and “Connct” screens as the call is completed.

5. Hang up by pressing the Bluetooth button when you complete your call.

English

Nothing Comes Close to a Cobra

Operating Your Radio

Mobile Phone Operation With Bluetooth

VHF Marine Radio Protocols

Operating Your RadioVHF Marine Radio Protocols

Mobile Phone Operation With Bluetooth

Bluetooth Button

Bluetooth Standby Mode,

Unpaired State

Bluetooth Standby Mode, Paired State

Last Number Redial

This feature allows you to redial the last number stored in the mobile phone’s internal Call Log. This feature is supported by most mobile phones.

To Initiate a Last Number Redial:

1. Press and release the Bluetooth button to get into the Bluetooth Standby mode.

2. From Bluetooth Standby, press and hold the

Bluetooth button for two (2) seconds [until the radio beeps two (2) times].

3. The paired mobile phone will redial the last number. The call will be complete through the speaker and microphone of the HH475.

4. Hang up by pressing the Bluetooth button when you complete your call.

To End Pairing (At the End of the Day)

You might not want to take your calls through this VHF radio once you are back at the dock or in a dry location. See the instructions in the Bluetooth Mode Programming section on page 21 for instructions on how to Turn OFF the Bluetooth function of the HH475. The “p” will disappear from the Bluetooth Standby screen.

NOTE

If switched to OFF setting, then the HH475 will not reconnect with mobile phone on power up. It must be turned back ON again from the Bluetooth Programming mode.

General Bluetooth Operation and Frequently Asked Questions

n What is the Industry Standard Range for Bluetooth

The industry standard range for Bluetooth wireless technology is 10 meters (30 feet). The HH475 will loose its pairing with the mobile phone if the mobile phone and the HH475 are separated further than this. The HH475 will automatically re-connect with cell phone when user comes back into range.

n How many phones can the HH475 pair with?

The HH475 can only pair with one mobile phone at a time. This is the standard operation for any Bluetooth headset or in-car Bluetooth system.

n Do I need to have my mobile phone with me?

Yes, the phone call is actually completed through your mobile phone and your mobile phone operator/carrier. The mobile phone must be with the 10 meters (30 feet) range of the HH475. The HH475 does not increase the offshore range of your mobile phone.

n Can I use a standard Bluetooth

headset with this radio?

No, the HH475 is using the headset profile of the Bluetooth specification to pair with your mobile phone. It can not pair to another Bluetooth headset.

n Can I use this unit as a speakerphone or hands-free device?

Turning on VOX allows you to use the radio without pressing the PTT (Push to Talk) button. The radio will still need to be operated in a face held position with the microphone close to the mouth. This radio uses a noise cancelling microphone, and it will not operate well from the belt clip or another hands-free position.

n Please make sure to note your VOX setting.

If VOX is set to On, then the receiving caller might hear conversation and noise in your background. This setting is retained in memory. If switched On, then it will be On the next time the radio is switched On and paired.

n Can I use my mobile phone for emergency use?

No, Cobra does not endorse mobile phones as a substitute for marine radios. They generally cannot communicate with rescue vessels and, if you make a distress call on your mobile phone, only the party you call will be able to hear you.

Additionally, mobile phones may have limited coverage over water. If you do not know where you are, the coastguard will have difficulty finding you if you are using your mobile phone. However, mobile phones can have a place onboard where mobile coverage is available – to allow social conversations and keep the marine frequencies uncluttered and available for their intended use.

Wireless Technology?

English

Nothing Comes Close to a Cobra

VHF Marine Radio Protocols

Operating Your Radio

Floating Feature

VHF Marine Radio Protocols

Operating Your Radio

Maintenance and Troubleshooting

BURP Feature

Floating Radio

English

BURP Feature

Cobra’s BURP feature allows the operator to expel water from inside the speaker grill. This is especially useful if the radio is dropped overboard or during extreme foul weather conditions. In these conditions, water can become trapped in the speaker grill and muffle the audio.

To Activate BURP:

1. Press and release the 16 and SCAN keys at the

same time.

2. The BURP tone(s) at maximum level will sound from the internal speaker for eight seconds.

3. During this time, the LCD will display the following “burp” as shown to the left.

4. Hold the radio with the speaker grill down to help the water drain out.

5. Press the ESC key at any time to cancel the BURP feature.

Floating Radio

This radio is designed to float if dropped overboard. The orange center makes it visible and easy to retrieve. This is also designed to meet JIS7 (IPX7) specifications it’s designed to operate properly

after being submerged in

one meter deep water for 30 minutes.

NOTE

Do not leave the radio floating in water permanently. This could cause premature corrosion of the battery contacts and other damage.

The radio is only designed to float with its included Lithium-ion battery. Using other approved batteries might cause the radio to sink. This also applies to the AA battery tray included, depending on the weight of the AA batteries used.

rugged radio

. This means

Maintenance

Very little maintenance is required to keep your CobraMarine VHF radio in good operating condition:

Keep the radio and charger clean by wiping with a soft cloth and mild detergent.

Do not use solvents or harsh or abrasive cleaners, which could damage the case or scratch the LCD screen.

If the radio is exposed to salt water, wipe with a soft, moist cloth at least once a day

to prevent buildup of salt deposits, which could interfere with button operation.

If the radio will be stored for a long period, such as over the winter,

remove the batteries from the battery tray and store them in a separate package. This is especially important if you are using alkaline batteries.

Troubleshooting

Problem Possible Cause(s) Solution(s)

No display on LCD when radio is turned On

Batteries run down quickly

Will transmit at low or medium power, but not at

Bluetooth capable phone will not pair with the radio or operation isn’t as expected

Will not transmit Selected channel is limited

No sound from speaker

No response to button press

No answer to calls Out of range of

high power

Batteries are exhausted Batteries not installed properly

Batteries are at the end of their life

Batteries are low Selected channel is limited

to one (1) watt

There might be a compatibility issue

to receive only

Volume level is too low or squelch level is too deep

Button lock is On Press Backlight/

other station Signal is blocked

by terrain

Recharge or replace batteries Remove batteries and reinstall

according to polarity markings

Replace with new batteries

Recharge or replace batteries Switch to another channel

Try with another brand or model mobile phone to confirm the problem

Contact Cobra with the details

Switch to another channel

Re-adjust volume and squelch

Key Lock button

Switch to three (3) or maximum watts or move closer

Move until you have a “lineof-sight” to the other station

•

VHF Marine Radio Protocols

VHF Marine Radio Procedures

VHF Marine Radio Protocols

Voice Calling

VHF Marine Radio Procedures

Maintain Your Watch

Whenever your boat is underway, the radio must be turned On and be tuned to Channel 16 except when being used for messages.

Power

Try 1 watt first, if the station being called is within a few kilometers. If there is no answer, switch to 3 watts and call again. You have the ability to go to high (maximum) power to increase your calling distance. Remember, the lower wattage outputs will conserve your battery and minimize interference to other users.

Calling Coast Stations

Call a coast station on its assigned channel. You may use Channel 16 when you do not know the assigned channel.

Calling Other Vessels

Call other vessels on Channel 16. You may also call on ship-to-ship channels when you know that the vessel is listening on a ship-to-ship channel.

Limits on Calling

You must not call the same station for more than 30 seconds at a time. If you do not get a reply, wait at least two (2) minutes before calling again. After three (3) calling periods, wait at least 15 minutes before calling again.

Change Channels

After contacting another station on a calling channel, change immediately to a channel which is available for the type of message you want to send.

Station Identification

Identify your station by your call sign, vessel name and the state registration number, at both the beginning and at the end of the message.

Prohibited Communications

You MUST NOT transmit:

False distress or emergency messages.

Messages containing obscene, indecent or profane language.

General calls, signals or messages (messages not addressed to a particular

station) on Channel 16, except in an emergency or if you are testing your radio.

When you are on land.

•

Voice Calling

•

To call another vessel or shore installation (e.g, lock or bridge tender):

Make sure the radio is On.

Make sure you are in standby listening mode on Channel 16. Make sure Channel

16 is not in use.

When the channel is open (quiet), press the Talk button and call a vessel.

Hold the radio or microphone several inches from your face and speak clearly and distinctly in a normal voice tone. Say “name or station being called,” “THIS IS [your vessel name or call sign].”

Once contact is made, you must leave Channel 16 and go to another working

channel. See channel listing in the appendix.

For Example

The vessel Corsair is calling the vessel Vagabond:

Corsair: “Vagabond, this is Corsair. Over.”

Vagabond: “Please switch and answer on Channel 68 (or any proper working

channel). Over.”

Corsair: “Switching to Channel 68. Over.”

If the other does not respond, wait two (2) minutes and repeat. You are permitted

to attempt contact three (3) times, two (2) minutes apart. If you still have not made contact, wait 15 minutes before trying again.

After communications are completed, each vessel must sign off with its call sign

or vessel name and the word “out” and return to Channel 16.

NOTE

For best sound quality at the station you are calling, hold the microphone on the front of the radio at least 51 mm (2 in.) from your mouth and slightly off to one (1) side. Speak in a normal tone of voice.

NOTE

“Over and Out” The most commonly misused procedure words are “over and out” within the same transmission. “Over” means you expect a reply. “Out” means you are finished and do not expect a reply.

English

Nothing Comes Close to a Cobra

VHF Marine Radio Protocols

Radiotelephone Calls, Emergency Messages and Distress Procedure

VHF Marine Radio Protocols

Emergency Messages and Distress Procedure

Radiotelephone Calls

Boaters may make and receive radiotelephone calls to and from any number on the telephone network by using the services of public coast stations. Calls can be made — for a fee — between your radio and telephones on land, sea and in the air. See the Appendix for the public correspondence (marine operator) channels.

If you plan to use these services, consider registering with the operator of the public coast station that you plan to work through. These services can provide you with detailed information and procedures to follow.

NOTICE

You may disclose privileged information during a radiotelephone call. Keep in mind that your transmission is NOT private, as it is on a regular telephone. Both sides of the conversation are being broadcast and can be heard by anyone who has a radio and tunes to the channel you are using.

Emergency Messages and Distress Procedure

The ability to summon assistance in an emergency is the primary reason to have a VHF marine radio. The marine environment can be unforgiving, and what may initially be a minor problem can rapidly develop into a situation beyond your control.

The coastguard monitors Channel 16, responds to all distress calls, and coordinates all search and rescue efforts. Depending on the availability of other capable vessels or commercial assistance operators in your vicinity, coastguard or coastguard auxiliary craft may be dispatched.

In any event, communicate with the coastguard as soon as you experience difficulties and before your situation becomes an emergency. Use the emergency message procedures only after your situation has become grave or you are faced with a sudden danger threatening life or property and requiring immediate help. Use Channel 16 to communicate your emergency message. Make sure you transmit on high power. If you are merely out of gas, do not send an emergency message. Drop your anchor and call a friend or marina to bring the fuel you need or to give you a tow.

•

Marine Emergency Signals

The three (3) spoken international emergency signals are:

MAYDAY

The distress signal MAYDAY is used to indicate that a station is threatened by grave and imminent danger and requests immediate assistance.

PAN

The urgency signal PAN is used when the safety of the vessel or person is in jeopardy. (This signal is properly pronounced pahn.)

SECURITE

The safety signal SECURITE is used for messages about the safety of navigation or important weather warnings. (This signal is properly pronounced see-cure-ee-tay.)

•

When using an international emergency signal, the appropriate signal is to be spoken three (3) times prior to the message.

If You Hear a Distress Call

You must give any message beginning with one (1) of these signals priority over any other messages. ALL stations MUST remain silent on Channel 16 for the duration of the emergency unless the message relates directly to the emergency.

If you hear a distress message from a vessel, stand by your radio. If it is not answered, YOU should answer. If the distressed vessel is not nearby, wait a short time for others who may be closer to acknowledge. Even if you cannot render direct assistance you may be in a position to relay the message.

English

Nothing Comes Close to a Cobra

VHF Marine Radio Protocols

Emergency Messages and Distress Procedure

VHF Marine Radio Protocols

Emergency Messages and Distress Procedure

Marine Distress Procedure

Speak slowly — clearly — calmly.

1. Make sure your radio is On.

2. Select Channel 16.

3. Press Talk button and say:

“MAYDAY — MAYDAY — MAYDAY.” (Or “PAN — PAN — PAN,” or “SECURITE — SECURITE — SECURITE.”)

4. Say:

“THIS IS [your vessel name or call sign],” repeated three (3) times.

5. Say:

“MAYDAY (or “PAN” or “SECURITE”) [your vessel name or call sign].

6. Tell where you are:

(what navigational aids or landmarks are nearby).

7. State the nature of your distress.

8. State the kind of assistance needed.

9. Give number of persons aboard and conditions of any injured.

10. Estimate present seaworthiness of your vessel.

11. Briefly describe your vessel (length, type, color, hull).

12. Say:

“I WILL BE LISTENING ON CHANNEL 16.”

13. End message by saying:

“THIS IS [your vessel name or call sign]. OVER.”

14. Release Talk button and listen. Someone should answer. If not, repeat the call, beginning at step 3 above.

Keep the radio nearby. Even after your message has been received, the coastguard can find you more quickly if you can transmit a signal for a rescue boat to hone in on.

For Example

“Mayday — Mayday — Mayday”

“This is Corsair — Corsair — Corsair,” repeated three (3) times]

“Mayday Corsair”

“Point Lynas bears 220 degrees magnetic — distance 5 kilometers”

“Struck submerged object and flooding — need pump and tow”

“Four (4) adults, three (3) children aboard — no one injured”

“Estimate we will remain afloat one-half hour”

“Corsair is 8 metre sloop with blue hull and tan deck house”

“I will be listening on Channel 16”

“This is Corsair”

“Over”

It is a good idea to write out a script of the message form and post it where you and others on your vessel can see it when an emergency message needs to be sent.

English

Nothing Comes Close to a Cobra

VHF Marine Radio Protocols

Specifications

Introduction

Accessories

Specifications

General

Number of Channels All U.S., Canadian, International and

Channel Spacing 25 kHz Modulation 5 kHz Max. Input Voltage 7.4 VDC Battery Life: LiON: 8 hours @ 6 watts, 16 hours @ 1 watt

5% TX, 5% RX, 90% Standby

Current Drain:

Standby 40 mA Receive (Rx) 200 mA

Transmit (Tx) 1.8 A @ High Power, 700 mA @ Low Power Temperature Range -20˚C to 50˚C Radio Dimensions 4.8" x 2.4" x 1.4"

Radio Weight 0 lbs 8 oz. (228 g) without batteries

Receiver

Frequency Range 156.050 to 163.275 MHz Receiver Type Double Conversion Super-Heterodyne Sensitivity:

20 dB Quieting 0.35 uV

12 dB Sinad 0.30 uV Adjacent Channel Selectivity -60 dB Intermodulation and Rejection -60 dB Spurious and Image Rejection -60 dB AF Output 250 mW @ 8 Ohms

Transmitter

Frequency Range (Tx): 156.025 to 157.425 MHz RF Output Power 1, 3 or 6 watts (5 watts maximum in Australia) Spurious Emissions -60 dB @ High Power, -55 dB @ Low Power Microphone Type Condenser Frequency Stability +/-10 ppm FM Hum and Noise 40 dB

Bluetooth

Clasification Class 2 Version 2.0 Range 10 Meters

NOAA Weather Channels

Alkaline: 18 hours @ 6 watts, 35 hours @ 1 watt

(123 mm x 62 mm x 36 mm) not including antenna

•

Accessories

•

Your Cobra radio has several optional accessories available to enhance the use of the radio. Some are listed below:

Lapel Speaker/Microphone

A speaker/microphone, that attaches to your lapel, by ordering P/N CM 330-001.

This unique accessory allows you to wear the radio on your belt while still being able to communicate with other vessels. A small Push to Talk (PTT) button on the lapel

speaker/microphone allows you to answer

any incoming call.

LiON Battery Pack

Long Life Battery

A long life replacement battery. P/N CM 110-010.

1900 mAh LiON replacement battery. Can be used with the charger included with this radio. The radio will NOT float with this battery attached.

Trademark Acknowledgement

•

Cobra®, CobraMarine®, Nothing Comes Close to a Cobra®, and the snake design are registered trademarks of Cobra Electronics Corporation, USA.

Cobra Electronics Corporation™, MicroBlueTMand Rewind-Say-AgainTMare trademarks of Cobra Electronics Corporation, USA.

The Bluetooth

word mark and logo are registered trademarks owned by Bluetooth SIG, Inc.

English

Nothing Comes Close to a Cobra

Appendix

VHR Marine Channel Assignments

Introduction

Appendix

VHR Marine Channel Assignments

VHF Marine Channel Assignments

Three (3) sets of VHF Channel Maps have been established for marine use internationally, in Canada and in the U.S.A. Most of the channels are the same for all three (3) maps, but there are definite differences (see table on the following pages).

Your radio has all three (3) maps built into it and will operate correctly in whichever area you choose. When shipped from the factory, your radio will be set to the International Channel Map. (See page 19 for instructions on how to change the Channel Map.)

The following is a brief outline for some of the channel assignments in the International Channel Map.

Distress, Safety and Calling

Channel 16

Getting the attention of another station (calling) or in emergencies (distress and safety).

Intership Safety

Channel 6

Ship-to-ship safety messages and for search and rescue messages to coastguard ships and aircraft.

On-Board Communication

Channel 15, 17

Used for communication between parts of large ships.

Navigational

Channels 13, 67, 75, 76

Channels are available to all vessels. Messages must be about navigation, including passing or meeting other vessels. These are also the main working channels for most locks and drawbridges.

•

Digital Selective Calling

Channel 70

This channel is set aside for distress, safety and general calling using only digital selective calling techniques. Voice communication is prohibited; your radio cannot transmit voice messages on this channel.

NOTE

The U.S.A. and Canada impose restrictions on the use of many channels within their territorial waters. These are noted in the channel assignment chart. If operating your vessel in U.S.A. or Canadian waters, consult the national communication authority or a knowledgeable local radio operator for further guidance.

English

Nothing Comes Close to a Cobra

Appendix

VHF Marine Channel Assignments

Appendix

VHF Marine Channel Assignments

Channel Number

01A

Channel Map

USA INT CAN Transmit Receive

••

•

Frequency

156.050 160.650 INT - Port Operations, Ship Movement, Public Correspondence; CAN - Public Correspondence

156.050 156.050 Port Operations, Commercial, VTS In selected areas

Power Limits

Channel Use

02 ••156.100 160.700 INT - Port Operations, Ship Movement, Public Correspondence; CAN - Public Correspondence 03 ••156.150 160.750 INT - Port Operations, Ship Movement, Public Correspondence; CAN - Public Correspondence

03A • 156.150 156.150 Government Only

04 • 156.200 160.800 Port Operations, Ship Movement, Public Correspondence

04A • 156.200 156.200 West Coast (Coast Guard Only); East Coast (Commercial Fishing)

05 • 156.250 160.850 Port Operations, Ship Movement, Public Correspondence

05A • • 156.250 156.250 Port Operations, VTS in selected areas

06 •••156.300 156.300 Intership Safety 07 • 156.350 160.950 Port Operations, Ship Movement, Public Correspondence

07A • • 156.350 156.350 Commercial

08 •••156.400 156.400 Intership 09 •••156.450 156.450 INT - Intership, Port Operations, Ship Movement; USA & CAN - Boater Calling Channel,

Non-Commercial (Recreational)

10 •••156.500 156.500 INT - Intership, Port Operations, Ship Movement; USA & CAN - Commercial 11 •••156.550 156.550 INT - Port Operations, Ship Movement; USA & CAN - Commercial, VTS In Selected Areas 12 •••156.600 156.600 Port Operations, Ship Movement 13 •••156.650 156.650 1 watt USA & CAN INT - Intership, Port Operations, Ship Movement; USA & CAN - Intership Navigation Safety

(Bridge-To-Bridge)

14 •••156.700 156.700 INT - Port Operations, Ship Movement; USA & CAN - Port Operations, VTS In Selected Areas 15 • Rx Only 156.750 Environmental (Receive Only). 15 ••156.750 156.750 1 watt INT - Intership, Port Operations, Ship Movement; CAN - EPIRB Buoys Only 16 •••156.800 156.800 Universal Distress, Safety and Calling 17 •••156.850 156.850 1 watt USA & CAN INT - Intership, Port Operations, Ship Movement; USA - State Controlled; CAN - Pilotage

English

Nothing Comes Close to a Cobra

Appendix

VHF Marine Channel Assignments

Appendix

VHF Marine Channel Assignments

Channel Number

18A

19A

20A

21A 21B

Channel Map

USA INT CAN Transmit Receive

•

••

•

••

•••

•

••

•

Frequency

156.900 161.500 Port Operations, Ship Movement, Public Correspondence

156.900 156.900 Commercial

156.950 161.550 Port Operations, Ship Movement, Public Correspondence

156.950 156.950 Commercial

157.000 161.600 1 watt CAN INT - Port Operations, Ship Movement, Public Correspondence; CAN - Coast Guard Only

157.000 157.000 Port Operations

157.050 161.650 INT - Port Operations, Ship Movement, Public Correspondence; CAN - Port Operations,

157.050 157.050 USA - Government Only; CAN - Coast Guard Only

RX only 161.650 Coast Guard Only (Weather Broadcasts)

157.100 161.700 Port Operations, Ship Movement, Public Correspondence

Power Limits

Ship Movement

Channel Use

22A • • 157.100 157.100 Coast Guard Liaison and Maritime Safety Information Broadcasts That Are Announced On Channel 16

23A

24 25

25B

26 27 28

28B

60 61

••

•

•••

••

•

157.150 161.750 INT - Port Operations, Ship Movement, Public Correspondence; CAN - Public Correspondence

157.150 157.150 Government Only

157.200 161.800 INT - Port Operations, Ship Movement, Public Correspondence; USA & CAN - Public Correspondence

157.250 161.850 INT - Port Operations, Ship Movement, Public Correspondence; USA & CAN - Public Correspondence

RX only 161.850 Safety: Continuous Marine Broadcast (CMB) Service by MCTS Canada

•

157.300 161.900 INT - Port Operations, Ship Movement, Public Correspondence; USA & CAN - Public Correspondence

157.350 161.950 INT - Port Operations, Ship Movement, Public Correspondence; USA & CAN - Public Correspondence

157.400 162.000 INT - Port Operations, Ship Movement, Public Correspondence; USA & CAN - Public Correspondence

RX only 162.000 Safety: Continuous Marine Broadcast (CMB) Service by MCTS Canada

•

156.025 160.625 INT - Port Operations, Ship Movement, Public Correspondence; CAN - Public Correspondence

156.075 160.675 Port Operations, Ship Movement, Public Correspondence

61A ••156.075 156.075 USA - Government Only; CAN - West Coast (Coast Guard Only); East Coast (Commercial Fishing)

62A

•

156.125 160.725 International Port Operations, Ship Movement, Public Correspondence

156.125 156.125 West Coast (Coast Guard Only); East Coast (Commercial Fishing)

•

English

Nothing Comes Close to a Cobra

Appendix

VHF Marine Channel Assignments

Appendix

VHF Marine Channel Assignments

Channel Number

Channel Map

Mapa de canales

USA INT CAN Transmit Receive

Frequency

Frecuencia

Power Limits

Channel Use

63 • 156.175 160.775 Port Operations, Ship Movement, Public Correspondence

63A • 156.175 156.175 Port Operations & Commercial, VTS In Selected Areas

64 ••156.225 160.825 Port Operations, Ship Movement, Public Correspondence

64A • • 156.225 156.225 USA - Government Only; CAN - Commercial Fishing

65 • 156.275 160.875 Port Operations, Ship Movement, Public Correspondence

65A •••156.275 156.275 Port Operations

66 • 156.325 160.925 Port Operations, Ship Movement, Public Correspondence

66A •••156.325 156.325 1 watt CAN Port Operations

67 •••156.375 156.375 1 watt USA INT - Intership, Port Operations, Ship Movement; USA - Commercial, Bridge-To-Bridge

Communication In Lower Mississippi River (Intership Only)

68 •••156.425 156.425 INT - Port Operations, Ship Movement; USA & CAN - Non-Commercial (Recreational) 69 •••156.475 156.475 INT - Intership, Port Operations, Ship Movement; USA - Non-Commercial (Recreational) 70 •••RX only 156.525 Digital Selective Calling (Voice Communications Not Allowed) 71 •••156.575 156.575 INT - Port Operations, Ship Movement; USA & CAN - Non-Commercial (Recreational) 72 •••156.625 156.625 Intership 73 •••156.675 156.675 INT - Intership, Port Operations, Ship Movement; USA - Port Operations 74 •••156.725 156.725 INT - Port Operations, Ship Movement; USA - Port Operations 75 • 156.775 156.775 1 watt Port Operations, Ship Movement 76 • 156.825 156.825 1 watt Port Operations, Ship Movement 77 •••156.875 156.875 1 watt USA & CAN INT - Intership; USA & CAN - Intership (Restricted To Communications With Pilots For Movement

And Docking Of Ships)

78 • 156.925 161.525 Port Operations, Ship Movement, Public Correspondence

78A • • 156.925 156.925 Non-Commercial (Recreational)

79A

•

••

156.975 161.575 Port Operations, Ship Movement, Public Correspondence

156.975 156.975 Commercial (Also Non-Commercial In Great Lakes Only)

English

Nothing Comes Close to a Cobra

Appendix

VHF Marine Channel Assignments

Appendix

VHF Marine Channel Assignments

Channel Number

80A

81A

82A

83 83A 83B

84 84A

85 85A

86 86A

87 87A

88A

Channel Map

USA INT CAN Transmit Receive

•

••

•

••

•

••

•

•••

•

•••

•

•••

•

•••

•

•••

•

Frequency

157.025 161.625 Port Operations, Ship Movement, Public Correspondence

157.025 157.025 Commercial (Also Non-Commercial In Great Lakes Only)

157.075 161.675 Port Operations, Ship Movement, Public Correspondence

157.075 157.075 USA - Government Only (Environmental Protection Operations)

157.125 161.725 Port Operations, Ship Movement, Public Correspondence

157.125 157.125 USA - Government Only; CAN - Coast Guard Only

157.175 161.775 INT - Port Operations, Ship Movement, Public Correspondence; CAN - Coast Guard Only

157.175 157.175 Coast Guard Only

RX only 161.775 Coast Guard Only (Weather Broadcasts)

157.225 161.825 Port Operations, Ship Movement, Public Correspondence

157.225 157.225 Public Correspondence

157.275 161.875 Port Operations, Ship Movement, Public Correspondence

157.275 157.275 Public Correspondence

157.325 161.925 Port Operations, Ship Movement, Public Correspondence

157.325 157.325 Public Correspondence

157.375 161.975 Port Operations, Ship Movement

157.375 157.375 Public Correspondence

157.425 162.025 INT - Port Operations, Ship Movement; USA & CAN - Public Correspondence (Ship-To-Coast)

157.425 157.425 Commercial Intership Only

Power Limits

Límites de potencia

Channel Use

(In USA, Only Within 75 Miles Of Canadian Border)

NOTE

Many of the plain-numbered channels, such as 01, 02 and 03, transmit and receive on different frequencies. This is termed duplex operation. The rest of the plain-numbered channels and all of the A channels, such as 01A, 03A and 04A, transmit and receive on a single frequency, which is termed simplex operation. Your radio automatically adjusts to these conditions. When in simplex operation, the A icon will appear on the LCD (see illustration on page A3).

English

NOTE

All the listed channels are pre-programmed at the factory according to international regulations, those of Industry Canada (Canada) and those of the FCC (U.S.A.). They cannot be altered by the user nor can modes of operation be changed between simplex and duplex.

In some countries, additional channels are available. These can be programmed on the radio by the local distributor.

Nothing Comes Close to a Cobra

Appendix

0168

Declaration of Conformity and CE Markings

Declaration of Conformity

We Cobra Electronics Europe Limited of

Dungar House Northumberland Avenue Dun Laoghaire County Dublin, Ireland

declare under our sole responsibility that the products VHF Marine Radios:

MR HH475 FLT BT EU

to which this declaration refers, conform with the following relevant standards or other standardising documents when properly installed and maintained and used for their intended purpose

EN 301 178-1 V1.2.1 (2003-12) EN 301 178-2 V1.2.2 (2007-02) EN 300 328 V1.7.1 (2006-10) EN 300 698-1 V1.3.1 (2003-12) Annex B EN 300 698-2 V1.1.1 (2000-08) EN 301 843-1 V1.2.1 (2004-06) EN 301 843-2 V1.2.1 (2004-06) EN 301 489-17 V1.2.1(2002-08) EN 62209-1 (2006) EN 60950-1: 2006

This product complies with Commission Regulation (EC) No 278/2009 of 6 April 2009 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for no-load condition electric power consumption and average active efficiency of external power supplies.

Dublin, Ireland JEAN-LOUIS POOT February 2010 Managing Director

Channel Map

Mapa de canales

Frequency

Frecuencia

Power Limits

Límites de potencia

•

CE Marking

This radio is marked adjacent to the serial number.

That means that this radio:

1. Complies with the essential requirements of the European Radio

and Telecommunication Terminal Directive 1999/5/EC.

2. May operate in some non-harmonised frequency bands and/or may be subject to licensing conditions in the country of use.

The user should be sure to check that the model and programming of this radio complies with his or her national licensing requirements.

English

•

Cobra Electronics MRHH475FLTBTEU User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual