Thank you for purchasing a CobraMarine® VHF radio.
Properly used, this Cobra
®
product will give you
many years of reliable service.
How Your CobraMarine VHF Radio Works
This radio is a battery-powered portable transceiver for use afloat. It gives you
two-way vessel-to-vessel and vessel-to-shore station communications, primarily
for safety and secondarily for navigation and operational purposes. With it, you
can call for help, get information from other boaters, talk to lock or bridge tenders,
and make radiotelephone calls to anywhere in the world through a marine operator.
Besides two-way communications, the radio can provide quick access to receive
all the NOAA (National Oceanographic and Atmospheric Administration) weather
channels and alert you to weather emergencies with a tone on a weather channel
you can select for your area.
Customer Assistance
Customer Assistance
Should you encounter any problems with this product, or not understand
its many features, please refer to this owner’s manual. If you require further
assistance after reading this manual, Cobra Electronics offers the following customer
assistance services:
For Assistance in the U.S.A.
Automated Help Desk English only.
24 hours a day, 7 days a week 773-889-3087 (phone).
Customer Assistance Operators English and Spanish.
8:00 a.m. to 5:30 p.m. Central Time Mon. through Fri. (except holidays)
773-889-3087 (phone).
Questions English and Spanish.
Faxes can be received at 773-622-2269 (fax).
Technical Assistance English only.
www.cobra.com (on-line: Frequently Asked Questions).
English and Spanish. productinfo
Five (5) rechargeable NiMH batteries
supplied with the unit provide extended
operating time compared to alkaline
batteries and have no memory effect.
Five (5) AAA alkaline batteries may also
be used for emergency backup power.
Allows programming of up to
ten (10) VHF memory channels.
Signal Strength Meter
Shows the strength of incoming
or outgoing signals.
Illuminated Buttons
Allows high visibility of all function buttons.
Use to monitor two (2) channels at once –
Channel 16 and one programmable channel.
Key Tone Icon
Button Lock Icon
Weather Icon
Weather Alert Icon
Battery Power Icon
Memory Channel Icon
Dual Watch Icon
Broadcast Receive Icon
•
•
A2
English
A3
English
Introduction
Assistance
Warranty
Table of Contents
Introduction
Our Thanks to You .................................................................................... A1
Customer Assistance
Radio Controls and Indicators
Backlit LCD (Liquid Crystal Display) Screen
Product Features
Important Safety Information
Recommendations for Marine Communication
FCC Licensing Information
Before installing and using your CobraMarine® VHF radio, please read these
general precautions and warnings.
Warning and Notice Statements
To make the most of this radio, it must be installed and used properly. Please read
the installation and operating instructions carefully before installing and using the
radio. Special attention must be paid to the WARNING and NOTICE statements in
this manual.
WARNING
Statements identify conditions that could result in personal injury or loss of life.
NOTICE
Statements identify conditions that could cause damage to the radio
or other equipment.
Safety Training Information
This CobraMarine® radio has been tested and found to comply with the FCC RF
exposure limits for use by the “General Population” and Industry Canada RF exposure
limits for use by the “General Public.” This CobraMarine VHF radio also complies
with the following guidelines and standards regarding RF energy and electromagnetic
energy levels as well as evaluation of those levels for human exposure:
n FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with
FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields.
n American National Standards Institute (C95.1-1992), IEEE Standard for Safety
Levels with Respect to Human Exposure to Radio Frequency Electromagnetic
Fields, 3 kHz to 300 GHz.
n American National Standards Institute (C95.3-1992), IEEE Recommended
Practice for the Measurement of Potentially Hazardous Electromagnetic
Fields — RF and Microwave.
n
Industry Canada RSS-102-Radio Frequency (RF) Exposure Compliance of
Radiocommunication Apparatus (All Frequency bands).
Conformité d’exposition de la fréquence du Canada RSS-102-Radio d’industrie
(rf) de l’appareillage de communication par radio (toutes les bandes de fréquence).
•
General Precautions
The following WARNINGS and NOTICE information on the following page will make
•
you aware of RF exposure hazards and how to assure you operate the radio within the
FCC RF exposure limits established for the radio.
WARNINGS
Your radio generates electromagnetic RF (radio frequency) energy when it is
transmitting. To ensure that you and those around you are not exposed to excessive
amounts of that energy, DO NOT touch the antenna when transmitting. KEEP the radio
at least two (2) inches (5cm) away from yourself and others when transmitting.
DO NOT operate with more than a duty cycle of 5% transmit, 5% receive and
90% standby. The radio is transmitting when the Talk button is pressed and the
transmit information shows on the LCD screen.
ALWAYS use only Cobra authorized accessories.
DO NOT operate the radio in an explosive atmosphere, near blasting sites,
or in any area where signs are posted prohibiting radio transmissions.
NEVER place the transceiver or microphone/speaker where they might interfere
with operation of your vessel or cause injury.
DO NOT allow children or anyone unfamiliar with proper procedures to operate
the radio without supervision.
Failure to observe any of these warnings may cause you to exceed FCC RF
exposure limits or create other dangerous conditions.
Industry Canada Antenna Notice
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
Avis d’antenne du Canada d’industrie
En vertu de la réglementation de l’industrie du Canada, cet émetteur de radio ne peut
fonctionner à l’aide d’une antenne d’un type et un maximum (ou moins) Gain
approuvé pour l’émetteur par Industrie Canada. Pour réduire le risque d’interférence
aux autres utilisateurs, le type d’antenne et son gain doivent être choisis afin que la
puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire
pour une communication réussie.
2
English
Nothing Comes Close to a Cobra
®
3
Assistance
Warranty
CustomerAssistance
Marine Communication
Introduction
Introduction
NOTICE
Your radio is waterproof only when the batteries are properly installed.
AVOID using or storing the radio at temperatures below -4˚F (-20˚C)
or above 140˚F (60˚C).
KEEP your radio at least 3 ft (0.9 m) away from your vessel’s magnetic
navigation compass.
DO NOT attempt to service any internal parts yourself. Have any necessary
service performed by a qualified technician.
This radio is supplied with NiMH (Nickel-Metal Hydride) rechargeable batteries.
n
Use only the Cobra power cord to recharge NiMH batteries in the radio.
n
Do not short circuit the batteries.
n
When replacing the batteries, dispose of the old batteries properly. The NiMH
batteries may explode if disposed of in a fire.
n
Do not attempt to operate your radio while recharging the batteries.
Changes or modifications to your radio MAY VOID its compliance with FCC (Federal
Communications Commission) rules and make it illegal to use.
Recommendations for Marine Communication
The frequencies your radio uses are set aside to enhance safety afloat and for vessel
navigation and operational messages over a range suitable for nearshore voyages.
If the 3 watt maximum output of your radio is not sufficient for the distances you travel
from the coast, consider a higher powered handheld or installing a Cobra Marine fixed
mount radio with up to 25 watts of output power. (Visit www.cobra.com or your
local dealer for model availability.)
If traveling far offshore, you should consider adding even more powerful radio
equipment such as HF single side band or satellite radio for your vessel.
The U.S. Coast Guard does not endorse cellular telephones as substitutes for marine
radios. They generally cannot communicate with rescue vessels and, if you make a
distress call on a cellular telephone, only the party you call will be able to hear you.
Additionally, cellular telephones may have limited coverage over water and can be
hard to locate. If you do not know where you are, the Coast Guard will have difficulty
finding you if you are using a cellular telephone.
However, cellular telephones can have a place on board where cellular coverage
is available — to allow social conversations and keep the marine frequencies
uncluttered and available for their intended uses.
English
4
and Radio Procedures
Marine Communication,
Introduction
Sea Tow Automated Radio Check (ARC) System
Please try the Sea Tow Automated Radio Check service. Areas where the safety check
service is available include the East Coast, Gulf of Mexico, and Southern California,
as well as in select inland regions. The first and only boating safety program of its
kind, the Sea Tow Automated Radio Check service is fully automated and allows 24
hour a day automatic responses to radio check calls.
Conducting a radio check through the Sea Tow Automated Radio Check service
couldn’t be simpler. All boaters need to do is tune their VHF radios to Channel 24, 25,
26, 27 or 28, depending on the region, key the mic, and ask for a radio check. The
Automated Radio Check system responds to each radio check with an automated
reply, and also replays to the boater’s original radio transmission, allowing him or her
to assess the strength of the signal and confirm the VHF radio is in good working order.
To find the Sea Tow Automated Radio Check service channel in an area, owners
should visit http://www.seatow.com/arc. The web page links to an instructional video
demonstrating how to use the service step by step.
FCC Licensing Information
CobraMarine VHF radios comply with the FCC (Federal Communications
Commission) requirements that regulate the Maritime Radio Service.
The radio operates on all currently allocated marine channels and is switchable for
use according to U.S.A., International or Canadian regulations. It features instant
access to emergency Channel 16 and calling Channel 9 as well as NOAA (National
•
Oceanic and Atmospheric Administration) All Hazards Radio with Alert that can be
accessed by pressing one (1) button.
Station License
An FCC ship station license is no longer required for any vessel traveling in U.S.A. waters
which uses a VHF marine radio, RADAR, or EPIRB (Emergency Position Indicating
Radio Beacon), and which is not required to carry radio equipment. However, any vessel
required to carry a marine radio on an international voyage, carrying an HF single side
band radiotelephone, or carrying a marine satellite terminal must obtain a station license.
FCC license forms and applications for ship and land stations can be downloaded through
the Internet at www.fcc.gov. Forms can also be obtained by calling the FCC at 888-225-5322.
International Station License
If your vessel will be entering the sovereign waters of a country other than the
U.S.A. or Canada, you should contact that country’s communications regulatory
authority for licensing information.
Radio Call Sign
Currently, the FCC does not require recreational boaters to have a license. The United
States Coast Guard recommends that the boat’s registration number and state of
registry (e.g., IL 1234 AB) be used as a call sign and be clearly visible on the vessel.
Procedures & FCC Licensing
Nothing Comes Close to a Cobra
•
®
5
Assistance
Warranty
CustomerAssistance
VHF Marine Radio Protocols
Assistance
Warranty
Assistance
Warranty
Installation
FCC Licensing (continued) &
Included in this Package
VHF Marine Radio Protocols
Installation
Wrist Strap, Belt Clip
and External Speaker/Mic
Canadian Ship Station License
You need a Radio Operator’s Certificate if your vessel is operated in Canadian waters.
Radio Operator training and certification is available from the Canadian Power
Squadron. Visit their website at http://www.cps-ecp.ca/.
User Responsibility and Operating Locations
All users are responsible for observing domestic and foreign government regulations
and are subject to severe penalties for violations. The VHF frequencies on your
radio are reserved for marine use and require a special license to operate from land,
including when your boat is on its trailer.
NOTE
This device complies with part 15 of the FCC Rules, and Industry Canada
license-exempt RSS standards. Operation is subject
to the following two (2) conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
FCC Warning: Replacement or substitution of transistors, regular diodes or
other parts of a unique nature, with parts other than those recommended by
Cobra may cause a violation of the technical regulations of part 80 of the FCC
Rules, or violation of type acceptance requirements of part 2 of the rules.
Included in this Package
You should find all of the following items in the package with your CobraMarine VHF radio.
Radio Wrist Strap
12V Power Cord
Wrist Strap and Belt Clip
Wrist Strap
Wrist Strap
•
The radio comes with the wrist strap already attached.
It can be easily removed if you choose not to use it.
Belt Clip Secured to Belt
Belt Clip
Use the spring-loaded belt clip to carry the radio on your
person.
1.
Press open the belt clip, slide it over the belt and
release the clip.
Insert the round guide on the back of the radio into the
2.
guide channel on the belt clip. The radio must be upside-
Removing the Radio
Secure Radio
•
down, as shown, to remove it from the belt clip.
3.
Once the knob is inserted all the way into the belt clip
channel, the radio swings free but remains secure.
Operating Instruction Manual
6
English
Spring-Loaded Belt Clip
For connection to 12-volt
power sources.
5 Rechargeable NiMH Batteries
External Speaker/Microphone Jack
Speaker/Microphone Jack
Your radio can be fitted with an optional External Speaker/
Microphone (not included), freeing your hands
for other tasks. Contact your local CobraMarine
®
or Cobra
directly for optional accessories.
To attach the external speaker/microphone:
Open the speaker/microphone tab on top
1.
of the radio.
2. Insert the plug into the speaker/microphone jack.
®
dealer
Nothing Comes Close to a Cobra
•
®
7
VHF Marine Radio Protocols
Assistance
Warranty
Assistance
Warranty
Warranty
Warranty
Assistance
Warranty
CustomerAssistance
Assistance
Warranty
CustomerAssistance
Batteries and ChargingBatteries and Charging
VHF Marine Radio Protocols
Batteries and Charging
Install Batteries
The radio is is shipped with five (5) NiMH rechargeable
batteries.
WARNING
The 12V power cord supplied with this radio is only
to be used with its rechargeable batteries. Do not
attempt to charge any other type of batteries in the
radio as fire, explosion or battery damage will occur.
Rechargeable battery life will be prolonged if extreme
ambient temperatures are avoided.
When your rechargeable batteries begin to discharge too
quickly, it is time to install new batteries. Your radio will also
operate with five (5) high-quality AAA alkaline batteries.
Installing the Batteries
Install the AAA batteries in the slots in the battery
compartment with the batteries oriented according
to the polarity (+ & -) marks in the slots.
Initial Charge
The Cobra-provided NiMH batteries may be charged in a car
or boat using the appropriate 12V power cord.
1.
Power Source
Insert the power cord into the side of the radio.
2. Insert the other end of the power cord into a 12V power
source.
3.
Observe that the red light on the power cord glows to
indicate that power is present.
4. Allow the batteries to charge for 12 to 14 hours before use.
•
Locking Tab
To Remove Batteries from Radio
1. Pivot the locking tab on the battery cover and remove it.
2. Pull the individual batteries out of the radio housing.
NOTICE
NiMH batteries are toxic. Please dispose of properly.
Some marine suppliers accept old batteries for
recycling and some municipal waste disposal agencies
have special provisions for battery disposal.
Maintaining the Battery Charge
Fully Charged
As you use your radio, the battery power icon will show the
battery power remaining. When the icon begins to flash, it is
time to recharge or change the batteries.
NOTICE
Partially Charged
Use only the 12V power cord provided by Cobra. Do
not use the power cord with alkaline batteries; only
the NiMH batteries are rechargeable. Spent alkaline
batteries must be discarded and replaced.
It is a good idea to keep a set of fresh, high-quality AAA
alkaline batteries with your radio. Should the rechargeable
Fully Discharged
batteries become discharged and no electrical power source
be available, you can insert fresh alkaline batteries and
continue to use your radio.
8
English
WARNING
Only the rechargeable NiMH batteries can be
recharged. You MUST use the charging device
provided with this radio. Do not substitute any
other type of charging adapter. Battery damage, fire
or explosion may result. It is equally important to
prevent the NiMH batteries from freezing to obtain
best performance from them.
Comes Close to a Cobra
®
9
VHF Marine Radio Protocols
Operating Your RadioVHF Marine Radio Protocols
Getting StartedGetting Started
Operating Your Radio
Getting Started
MR HH125 Radio
Refer to the foldout at the front of this manual to identify the
various controls and indicators on your radio. Throughout
this manual you will be instructed to “Press” or to “Press
and Hold” various buttons (except “Push to Talk”) on the
radio. “Press” means a momentary press of approximately
one (1) second. “Press and Hold” means to hold the button
down for approximately three (3) seconds.
Whenever you press any button except the Talk button on
your radio, a brief tone (beep) will sound to confirm the
button press. With all button presses, the appropriate icon
will appear on the LCD and the backlight will turn On. The
backlight will stay On for 10 seconds after the button is
released.
At times, you will hear two (2) other sounds. Two (2) beeps
will sound to confirm your setting changes and three (3)
beeps will sound to notify you of an error.
Common Radio Functions
The following procedures define common operating functions of the radio when in
either Marine Standby or Weather (WX) Standby modes.
Power/Volume Control
On/Off/Volume Control
(Clockwise)
On/Off/Volume Control
(Counterclockwise)
English
10
Power On/Off Control
The On/Off/Volume control is located at the upper right side
of the radio. Turning the On/Off/Volume control past the
detent position will turn the radio On or Off.
Power Saver
Your radio has a unique circuit designed to extend battery life.
If there are no transmissions, signals, or button presses for
ten (10) seconds, the radio will automatically switch to Power Save mode. Signal reception or any button press will take the
radio out of Power Save mode.
Volume Control
Volume is controlled by turning the On/Off/Volume control.
n To increase the volume, turn the On/Off/Volume control
clockwise.
n To decrease the volume, turn the On/Off/Volume control
counterclockwise.
•
Speaker/Mic Jack
Radio Speaker and Microphone
The internal Radio Speaker and Microphone are located on the
bottom front face of the radio below the lower control buttons.
An optional Speaker/Microphone jack is located at the top of
the radio between the antenna and the On/Off/Volume control.
Flip the protective cap open and insert the plug into the jack.
Talk Button
Talk Button
Press and hold the Talk button to transmit messages.
Release the Talk button to stop transmitting. If the Talk
button is pressed while on a receive only channel, a three
beep error signal will sound.
Squelch Control
Squelch Control
This radio is equipped with an automatic squelch control.
Squelch filters weak signals and radio frequency (RF) noise
so you can hear the main signal clearly.
To receive weak signals, the automatic squelch can be
turned Off (opened) by pressing the Squelch Defeat button.
You will likely hear a lot of static and RF noise along with
the weak signal.
Press the Squelch Defeat button for up to five (5) seconds to
briefly open squelch. To hold squelch open for longer periods,
press and hold the Squelch Defeat button for more than five
(5) seconds. Squelch will remain open until you press the
Squelch Defeat button again or you change channels.
®
Nothing Comes Close to a Cobra
11
VHF Marine Radio ProtocolsVHF Marine Radio Protocols
Assistance
Warranty
CustomerAssistance
Assistance
Warranty
CustomerAssistance
VHF Marine Radio Protocols
Operating Your RadioVHF Marine Radio Protocols
Getting StartedGetting Started
Operating Your Radio
Backlight/Key Lock Button
Key Locked Buttons
Key Lock Icon
Channel Up/Down Buttons
Currently On Channel 88
12
English
Backlight/Key Lock Button
The LCD will be illuminated by the backlight as long as any
button is pressed and will remain On for 10 seconds after
the button is released.
To Display the Backlight Momentarily:
Press the Backlight/Key Lock button. The backlight will
remain On for 10 seconds. If the backlight is already On,
a press of the Backlight/Key Lock button will turn it Off.
Key Lock
To prevent accidental changes to your settings, you can lock
all of the buttons on the front of the the radio along with the
Squelch Defeat button.
To Lock or Unlock the Buttons:
Press and hold the Backlight/Key Lock button for two
(2) seconds. The Key Lock icon will appear or disappear
in the LCD. When Key Lock is On, pressing any of the
buttons on the front of the radio will result in a three (3)
beep error message.
Both the Backlight/Key Lock button and the Talk button are
active — you can Receive (Rx) or Transmit (Tx) a message
with Key Lock On, but you cannot change the channel.
Channel Up/Down Buttons
Your radio will Receive (Rx) and Transmit (Tx) VHF signals on
the channel indicated on the LCD display. You can change the
channel at any time using the Channel Up/Down buttons.
To Change Channels:
Press the Channel Up/Down buttons.
If you are on Channel 88, pressing the Channel Up
button will advance to Channel 01. If you are on Channel
01, pressing the Channel Down button will advance to
Channel 88.
You can press and hold the Channel Up/Down button for
fast advance. The beep sound will occur only at the first
press of the buttons and not during fast advance.
If the new channel selected is restricted to low power, the
radio will automatically switch to Low Power mode and
the Low Power icon will appear on the LCD.
If the radio is in the Key Lock mode, the channel will not
change and the three (3) beep error signal will sound.
Scan Button
HI/LO Power Button
SCAN Button
Press and hold the SCAN button to scan all channels.
The SCAN icon will display on the LCD display. Scanning
begins at lower channels, and scans to higher channels.
Press Channel Up/Down button to change the scan
direction.
When a signal is received in SCAN mode, the radio will
pause 10 seconds before resuming SCAN operation.
The scan will stop when the Talk button is pressed.
NOTE
Memory channels need to be saved to effectively
enter the Memory Channel mode and scan all
memory channels. See page 25.
High/Low (HI/LO) Power Button
Your radio can transmit selectively at 1 or 3 watts of power.
Cobra suggests you maintain the low power setting for
short-range communication. You will conserve battery life
and avoid overpowering nearby stations by using a low
power signal. Use the High Power setting for long-range
communications or when you do not receive a response
to a signal sent at 1 watt.
To Toggle Between HI/LO Power Modes:
Press the Power Level/Weather button. The LCD
will show which mode is in effect. Some channels are
restricted for a maximum use of 1 watt. Your radio will
automatically set the power to Low Power mode when
you select those channels.
NOTE
Some channels, frequency bands and countries of use
might not be able to operate in High Power mode.
Nothing Comes Close to a Cobra
®
13
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.