Cobra Electronics CXR950 User Manual

Nothing Comes Close to a Cobra
Introduction
Staying in touch with your family and friends is convenient and easy when using your microTALK radio. Some of the many uses you will discover include:
®
Communicating with others while hiking, biking and working;
Owner’s Manual
keeping track of family and friends at a crowded public event; checking with travel companions in another car; talking with neighbors; arranging meeting spots with others while shopping at the mall.
Belt Clip
Secure your microTALK radio while on the go.
Carrying your microTALK
®
®
radio with
you is easy when using the belt clip. The belt clip easily attaches to your belt,
purse or backpack.
Customer Assistance
For Assistance in the U.S.A.
In this user’s manual, you should find all the information you need to operate your microTALK assistance after reading this manual, Cobra Electronics offers
®
radio. If you require further
the following customer assistance services:
Automated Help Desk
English only. 24 hours a day, 7 days a week 773-889-3087 (phone).
Customer Assistance Operators
English and Spanish. 8:00 a.m. to 6:00 p.m. Central Time, Monday through Friday (except holidays) 773-889-3087 (phone).
Questions
English and Spanish. Faxes can be received at 773-622-2269 (fax).
Technical Assistance
English only. www.cobra.com (on-line: Frequently Asked Questions). English and Spanish. productinfo
For more information or to
order any of our products,
please visit our website:
www.cobra.com
®
English
TWO-WAYRADIO MODEL
CXR950
Nothing Comes Close to a Cobra
®
Printed in China
Part No. 480-475-P
Version A
English
For Assistance Outside the U.S.A.
Contact Your Local Dealer
A1
@cobra.com (e-mail).
©2009 Cobra Electronics Corporation™
6500 West Cortland Street
Chicago, Illinois 60707 USA
www.cobra.com
LI 7300
Introduction
Assistance
Warranty
Assistance
Warranty
Product Features
1
14
13
12
11
10
1. Antenna
2. External Speaker/ Microphone/Charge Jack
3. Backlit LCD Display
4. On/Off Power Button
5. Hi-Low Power Button
6. Channel Up/Down Buttons
7. Mode Button
8. Lock/Enter Button
A2
15
16
2
17
18
3
4
5
6
7
8
9
9. Rewind Button
10. Speaker/Microphone
11. Volume Up/Down Buttons
12. Light/Max Range Button
13. Talk Button
14. Call Button
15. Wrist Strap Connector
16. Belt Clip
17. Battery Compartment
18. Battery Door Latch
Introduction
Features
22 Channels
7 shared with FRS/GMRS, 7 FRS only, 8 GMRS only
Rewind-Say-Again™
• Digital Voice Recorder
10 Channel NOAA
ALL Hazards Radio
142 Privacy Codes (38 CTCSS/104 DCS)
Hands-Free
Operation (VOX)
®
VibrAlert Silent Paging
10 Channel Memory
Scan Channels, privacy codes, memory
Selectable Hi•Med•Low Power
In GMRS
Backlit
LCD Display
Button Lock
Call Alert 10 selectable tones
Speaker/
Microphone/ Charge Jack
Roger Beep Selectable on/off
Battery/
Power Saver
Keystroke Tones Selectable on/off
Auto Squelch
Maximum Range
Extender
Belt Clip
A3
Product Features
Backlit LCD Display
4
1516
5
14
11. Memory Location
12. Privacy Code
13. Receive/Transmit
14. Hi-Med-Low Power
15. Battery Low
16. Scan Icon
17. Power Saver Icon
18. Channel Numbers
3
2
1
18
17
1. Rewind Icon
2. Call Alert and VibrAlert®Icon
3. Lock Icon
4. Keystroke Tones Icon
5. DCS Icon
6. Roger Beep Icon
7. VOX Icon
8. NOAA All Hazards Radio Icon
9. Memory Icon
10. CTCSS Icon
Maximum range may vary and is based on unobstructed line-of-sight communication under ideal conditions.
tant FCC Licensing Inf
Impor
This radio operates on General Mobile Radio Service (GMRS) frequencies which require a Federal Communications Commission (FCC) license. See page 27 for licensing and other r
elated information.
6
13
Number
Numbers
Icon
Icons
Indicator
ormation
Warranty and Trademark
Warranty
Limited One-Year Warranty on Radio(s) & Charger
For Products Purchased in the U.S.A.
Cobra Electronics Corporation warrants that its Cobra microTALK
7
8
9
10
11
12
radios and charger, and the component parts thereof, will be free of defects in workmanship and materials for a period of one year from the date of first consumer purchase. This warranty may be enforced by the first consumer purchaser, provided that the product is utilized within the U.S.A.
Cobra will, without charge, repair or replace, at its option, defective microTALK to the Cobra Factory Service department, accompanied by proof of the date of first consumer purchase, such as a duplicated copy of a sales receipt.
You must pay any initial shipping charges required to ship the product for warranty service, but the return charges will be at Cobra’s expense, if the product is repaired or replaced under warranty. This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.
Exclusions: This limited warranty does not apply: 1) To any product damaged by accident; 2) In the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs; 3) If the serial number has been altered, defaced or removed; 4) If the owner of the product resides outside the U.S.A.
All implied warranties, including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty. Cobra shall not be liable for any incidental, consequential or other damages; including, without limitation, damages resulting from loss of use or cost of installation.
Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you.
For Products Purchased Outside the U.S.A.
Please contact your local dealer for warranty information.
90-Day Warranty on Cobra Lithium Ion Rechargeable Battery Packs
For products purchased in the U.S.A. and Canada.
Trademark Acknowledgement
Cobra®, microTALK®, Nothing Comes Close to a Cobra®, VibrAlert and the snake design are registered trademarks of Cobra Electronics Corporation, USA. Cobra Electronics Corporation™ and Rewind-Say-Again™ are trademarks of Cobra Electronics Corporation, USA.
Acknowledgement
®
®
radios, chargers, products or component parts upon delivery
®
29
Assistance
Warranty
Operation Customer Assistance Warranty
1
Introduction
Caring for Your microTALK®Radio
Your microTALK®radio will give you years of trouble-free service if cared for properly. Handle the radio gently. Keep the radio away from dust. Never put the radio in water or in a damp place. Avoid exposure to extreme temperatures.
Rechargeable Battery Pack and Desktop Charger
To install or replace battery pack:
1. Remove belt clip by releasing belt clip
latch and sliding clip up.
2. Pull down on the battery door latch to remove
the battery compartment cover.
3. Insert lithium ion battery pack. Position
battery pack as shown in radio.
4. Replace battery compartment cover
and belt clip.
Estimated operation time on full charge: 12 hours.
Rechargeable battery packs must be recycled or disposed of properly in compliance with all applicable laws. They may not be thrown in the trash.
Certain states or municipalities require recycling and have established collection programs. Please contact your local waste removal authority for instructions, or return to Cobra for recycling.
Wrap battery packs carefully and mail postage prepaid to: Cobra Electronics Corporation, 6500 West Cortland Street, Chicago, IL 60707 USA, Attn: Battery Recycling.
Do not put battery packs into fire or expose to high heat. They may explode.
Pull Down Latch
Remove Belt Clip
Insert Battery Pack
For charging microTALK®radio(s) in desktop charger:
1.
Insert radio(s) into desktop charger as shown.
2. Insert round connector of 120-volt adapter
into jack on back of charger.
3. Plug 120-volt adapter into electrical outlet. If charging light is not on, check position of
radio. Radio should be upright. The charge
indicator light will stay
on as long as the radio is in the charging
well and the battery pack is charging. After the battery pack is fully charged, the charge indicator light will turn
off.
It normally takes about 15 hours to fully recharge battery pack. Batter
y pack will not be damaged if it stays in the charging well
longer than that.
To charge a single radio, you can bypass the desktop charger and simply insert the wall adapter’s round connector directly into the speaker/microphone/charge jack located on the top of the radio.
Use only the supplied rechargeable batteries and charger for recharging your Cobra microTALK
®
radio.
Cobra recommends your radio is turned off while being charged.
Assistance
Warranty
3
2
Assistance
Warranty
Turning on Your microTALK®Radio
Press and hold the Power button until you hear a series of audible tones indicating the radio is
on.
Your microTALK
®
radio is now in Standby
mode, ready to receive transmissions. The radio is always in
Standby mode, except when the
Talk, Call, Mode or Power buttons are pressed.
Battery Low
When battery power is low, the Battery Low icon will blink. Your batteries should be recharged.
Auto Battery Save
Your microT
ALK
®
radio has a unique circuit designed to extend battery life. If there are no transmissions for 10 seconds, the radio will automatically switch to
Battery Save mode and
the
Power Saver icon will flash in the display.
This will not affect the radio’s ability to receive incoming transmissions.
Communicating with Another Person
1. Press and hold the Talk button.
2. With the microphone about 2 inches
(5 cm) from your mouth, speak in a normal voice.
3. Release the Talk button when you are
finished talking and listen for a response.
You cannot receive incoming calls while pressing the
Talk button.
Both radios must be tuned to the same channel/privacy code to communicate.
Introduction
Using Your Radio
Customer Assistance WarrantyIntroduction
Operation
Quick Start
1. Press and hold the Power button
to turn
on your radio.
2. Press the Channel Up or Channel Down
button to select a channel.
Both radios must be tuned to the same channel/privacy code to communicate.
3. Press and hold the Talk button while
speaking into the microphone.
4. When finished talking, release the Talk
button and listen for a response.
On/Off Power
Battery Low
Battery Save Mode
Talk Button
Two Inches (5 cm) fr
om Mouth
Insert Radio(s)
Assistance
Warranty
Assistance
Warranty
Assistance
Warranty
Assistance
Warranty
Assistance
Warranty
Customer Assistance WarrantyIntroduction
5
Operation
4
Using Your Radio
Channels
With the radio on, select any of the 22 channels by pressing the
Channel Up
or Channel Down button.
Both radios must be tuned to the same channel to communicate.
Channels 1 through 7 are shared by FRS and GMRS. Channels 8 through 14 are FRS only. Channels 15 through 22 are GMRS only.
See page 26 for FRS/GMRS frequency allocations and compatibility charts.
Listening for a Response
Release the Talk button to receive incoming transmissions. Your microTALK
®
radio is always
in
Standby mode while the Talk or Call buttons
are not pressed.
Call Button
To alert another person that you are calling: – Press and release the Call button.
The other person will hear a two (2) second call tone. This tone is used only to establish voice communications.
See page 24 on how to select from 10 available call tone settings.
To Illuminate Display
Press and release the Light/Max Range button to illuminate the display for 10 seconds.
Operation
Time-out Timer
The Time-out Timer feature limits transmit time to three (3) continuous minutes to extend battery life and prevent accidental operation. After three (3) continuous minutes of transmission, the radio will stop transmitting and will require a rest period of 30 seconds. During this time the display will flash on and off, and an error tone will sound if the
Push-to-Talk button is pressed.
Selectable High•Medium•Low Power Output
When in close proximity to another party or during favorable conditions, you can switch from
High to
Medium to Low Power to extend battery life.
This feature applies to GMRS Channels 1 through 7 and 15 through 22 only. Channels 8 through 14 operate exclusively on low power.
To switch from high to medium to low power: – Press and release the Hi•Low button.
When in High Power and using Channels 1 through 7 and 15 through 22, the
Hi icon will be
visible in the LCD display. When in Medium Power and using Channels 1
through 7 and 15 through 22, the
Med icon will
be visible in the LCD. When in Low Power or while using channels 8
through 14, the
Low icon will be visible in the
display.
When using an external speaker/ microphone accessory on channels 1-7 or 15-22, your microTALK
®
radio will
only operate on medium or low power.
Channel Button
Channel Number
Listening
Call Button
Hi-Low Button
Hi Power Icon
Low Power Icon
Light/Max Range
Medium Power Icon
Talk Button
Customer Assistance WarrantyIntroduction
7
Operation
6
Using Your Radio
Auto Squelch/Maximum Range
Your microTALK®radio is equipped with Auto Squelch, which automatically shuts
off weak transmissions and unwanted noise
due to terrain and conditions. This slightly reduces the
Maximum
Range
at which signals can be heard.
You can turn off auto squelch to allow all signals to be received and extend the maximum range of your radio.
To briefly turn off auto squelch: – Press the Light/Max Range button
for less than five (5) seconds.
If you hear two (2) beeps, you have turned the maximum range extender
on (see below). To turn maximum range extender on: – Press and hold the Light/Max Range button
for at least five (5) seconds until you hear two (2) beeps which indicates the maximum range extender is
on. To turn maximum range extender off: – Press and release the Light/Max Range
button or change channels.
Lock Feature
The Lock feature locks the Channel, Mode, Hi•Low and Power buttons to prevent accidental operation.
To turn the lock feature on or off: – Press and hold the Lock/Enter button for
two (2) seconds.
A double beep sound is used to confirm your lock
on or off request. When in Lock mode,
the
Lock icon will be displayed.
Operation
Light/Max Range
LI 7300
Lock/Enter Button
Lock Mode
Speaker/Microphone/Charge Jack
Your microTALK®radio can be fitted with an external Speaker/Microphone, freeing your hands for other tasks. This same jack also serves as the connecting point for the wall charger/adapter.
To attach a speaker/microphone:
1.
Open the speaker/microphone/charge tab on top of your microTALK
®
radio.
2. Insert the plug into the speaker/
microphone/charge jack. (See page 5 for power output settings while using speaker/ microphones.)
To connect a wall charger/adapter:
1.
Open the speaker/microphone/charge tab on top of your microTALK
®
radio.
2. Insert the wall charger/adapter plug
into the speaker/microphone/charge jack.
Rewind-Say-Again™
The Rewind-Say-Again feature on your microTalk®radio can record incoming or outgoing calls. Recorded calls will fill the memory up to its 20-second capacity. As additional calls are recorded, the oldest calls will be dropped from memory. To save recordings, turn
off the Rewind-Say-Again feature.
To turn on Rewind-Say-Again:
1.
Press and hold the Rewind button until the Rew icon illuminates.
The feature will remain
on until turned off.
To turn off Rewind-Say-Again:
1.
Press and hold the Rewind button until the Rew icon is no longer illuminated.
Recording will be ended and the most recent 20 seconds of recording will be retained in memory.
To record incoming transmissions:
1.
Turn on Rewind-Say-Again.
If Rewind-Say-Again is already
on, incoming calls
will be recorded without further action on your part.
Speaker/Microphone/ Charge Jack
LI 7300
Rewind Button
Rewind Icon
Loading...
+ 11 hidden pages