Cobra VLX 600 User Manual

* Cobra recommends you always wear a helmet while riding. Please

never operate your motorcycle while under

the influence of alcohol and/or drugs. Enjoy the new look of your motorcycle and please ride safely.

1 - Sissy Bar w/pad

Your sissy bar will install in just a few minutes using common tools. Read all

instructions carefully and

Install the brackets on each side with one short supplied spacer at the front and one long supplied spacer at the

rear of each bracket between the bracket and the fender rail and secure using the four supplied (4) M8 x 55mm

02-4601/02

5101/02

5601

DOCUMENT NO

. 0019 REV. A

* Cobra recommends you always wear a helmet while riding. Please never operate your motorcycle while under

the influence of alcohol and/or drugs. Enjoy the new look of your motorcycle and please ride safely.

1 - Sissy Bar w/pad

Your sissy bar will install in just a

few minutes using common tools. Read all

instructions carefully and

one long supplied spacer at the

rear of each bracket between the bracket and the fender rail and secure using the four supplied (4) M8 x 55mm

02-4601/02

5101/02

5601

DOC

UMENT NO

. 0019 REV. A

www.cobrausa.com

23801 E. La Palma Ave., Yorba Linda, Ca 92887 Ph. 714.692.8180, Fax. 714.692.5016

Items Supplied >

2 - Brackets 2 - Spacers, Short 2 - Spacers, Long 4 - M8 x 55mm Buttonhead Bolts 4 - M8 x 16mm Buttonhead Bolts

Application(s) >

HONDA VLX 600 1998 & UP

Instruction Manual >

completely before installing your new sissy bar.

1. Remove the stock fender rail bolts one side at a time.

2. Button Head bolts, do not tighten completely.

3. Install the sissy bar to the brackets using the four (4) supplied M8 x 16mm Button Head bolts then tighten all hardware.

03/07