Cobra EL-3010 S User Manual

COBRATRON

INSTALLATION AND MAINTENANCE GUIDE

EL-3010 S/D

TOUCH FREE PILLAR TYPE SOAP DISPENSER

MAPICS NR. 4222025

INDEX

1 TECHNICAL DATA

2 PACK CONTENTS

3 PRE-INSTALLATION INFORMATION

4-6 INSTALLATION

7 FILLING THE SOAP TANK

8 SETTINGS ADJUSTMENT WITH A REMOTE CONTROL

9 MAINTENANCE

Care and cleaning of chrome and special finishes

10 LIMITED WARRANTY

11 TROUBLE SHOOTING

TECHNICAL DATA

EL-3010S/D

Capacity:

Power Supply:

Soap viscosity:

Standard discharge:

1 Liter

IP 67 Transformer
Box

100 – 3800 cPs

0.8cc, Adjustable

1

PACK CONTENTS

Familiarize yourself with the part names and confirm that the parts are
included.

1.

3.

1. 1 x Body and fixing accessories

2. 1 x Soap tank and pump assembly

3.1xIP67Transformer Box

2

2.

PRE–INSTALLATION INFORMATION

Check contents

Separate all parts from the packaging and check each part with the
"Pack contents" section.

Make sure all parts are accounted for before discarding any
packaging material.

If any parts are missing, do not attempt to install your touch free soap
dispenser until you obtain the missing parts.

Warnings

Do not install the product facing a mirror or any other electronic

?

system operated by an infra-red sensor.

It is recommended to keep a minimum distance of 1.50 meters

?

between the soap dispenser and any other objects.

Important:

the tap/ mixer nearby should not interfere with the soap dispenser
sensor detection area.

Keep in mind that the location of the user hands, while using

3