COATS Kit 85000675 User Manual

85000674 01 01/09 © COPYRIGHT 2007 HENNESSY INDUSTRIES AND COATS ALL RIGHTS RESERVED PRINTED IN U.S.A.

Air Inflator Mounting Kit 85000675

For use with a Coats 85009939 Air-Check™

Inflator or an Excel Brand Air Inflator

Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565 [phone] • [phone] • [phone] FAX • www.ammcoats.com

Shown for Reference
Only, Not Part of Kit

4

Shown for
Reference Only
Not Part of Kit

9

3

2

1

7

5

8

6

Coiled inflate
air hose
not shown.

Connect 8113417 1/4-inch
air hose to air inflate unit
securing with hose clamp
8101428 and connect to
proper air source.

Feed 1/4-inch air hose
8113417 and power cord
from air inflate unit thru
center of tube as shown.

10

11

COATS
Unit

EXCEL
Unit

Note: The Coats Air-Check™ inflator and the Excel

Air Inflator are customer supplied parts and ARE
NOT included in this kit.

Ref. Part No. Description

*1 8000378 1/4" Brass St. Fitting
*2 8101428 1/4-inch Hose Clamp

3 8102459 Self Tapping Bolt
4 8106301 1/4" Hex Hd Self Tap Screw, Gr.5
5 8120325 5/16 x 1.00 Serrated Washer Hd. Screw
6 8181183 5/16-18 Nylon Insert Lock Nut Gr.5

*7 8113417 Black Rubber Hose, 1/4 ID x 120"

8 85000199 Arm Stop Trim Strip

9 85000649 Air Inflate Mounting Bracket
10 871100805 HHCS Screw, 1/4-20 x 3/4
11 8181369 .250-20, Nylock Hex Nut

*For use with the Excel brand inflator. These also come stan­dard with the Coats Air-Check™.