COATS Inflation Guard Structure Assembly User Manual

Inflation Guard Structure

Assembly Instructions

6. Connect the rubber air hose from the inflation guard
to the tube end at the tower top.

7. Read the machine operating instructions to
understand all the functions and safety operations of
the tire changer.

8. Practice changing and operating the new inflation
system using a typical tire and wheel combination.

1. Remove the lag bolt from the inflation guard support
bracket with a 9/16 socket wrench.

2. Remove the rope used to secure the inflation guard
structure and the bead loosener arm to the chassis.

3. Locate the mounting holes in the inflation guard
support and the tower column support brackets.

Position the inflation guard structure against the
tower column support brackets and align the
mounting holes.

5. Secure structure to support brackets with 8 bolts.
Use a 9/16 socket wrench.

Printed in U.S.A. 8182994 00 1/96

4 Holes
Each
Bracket