107828
COUNTER HEIGHT TABLE
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
PAGE 1 OF 3
REVISION 0 : 12/19/2018
FLAT HEAD SCREW
ITEM :
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
!
107828
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 45 MINUTES
ASSEMBLY INSTRUCTIONS
PARTS IDENTIFICATION
PART NAME FIGURE
A
B
C
D
E
F
G
TOP 1PC
BACK PANEL 1PC
SHELF 3PCS
LEFT PANEL
LEG
RIGHT PANEL
LEG
LEG 2PCS
MIDDLE LEG 1PC
QTY
1PC
1PC
HARDWARE IDENTIFICATION
HARDWARE NAME FIGURE
BIG ALLEN WRENCH
1
2
3
4
5
6
7
(M5 - BLK)
BOLT
(Ф5/16'' x 2''- RBW)
LOCK WASHER
(Ф5/16'' - RBW)
FLAT WASHER
(Ф5/16'' - RBW)
CAM BOLT
(1-11/15'' - SR)
SMALL ALLEN
WRENCH
(M4 - BLK)
CAM NUT
(Ф3/5'' - SR)
QTY
1PC
8PCS
8PCS
8PCS
18PCS
1PC
18PCS
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;
8
(Ф3/19'' x 1'' - RBW)
9
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
PAGE 2 OF 3
DECORATIVE
(17MM - BLK)
www.coastercompany.com
1PC
6PCS
Loading...