107223(B1&B2)
BENCH
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
REVISION 0:12/30/2016
PAGE 1 OF 2
ITEM : 107223(B1&B2)
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishment
ASSEMBLY INSTRUCTIONS
.
ASSEMBLY TIME
10 MINUTES
HARDWARE IDENTIFICATION :
Z-B1 (BOX 1) - HARDWARE
NO.
PARTS IDENTIFICATION :
B1 (BOX 1)
SEAT
A
B2 (BOX 2)
LEG FRAME
B
CROSSBAR
C
LEG SUPPORT
D
WOOD TRIM
E
NOTE: PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS; HOWEVER MANUFACTURER DOES
NOT PROVIDE THIS ITEM.
1 PC
2 PCS
1 PC
2 PCS
2 PCS
STEP 1
2
7
3
DESCRIPTION
SHORT BOLT
1
WITH WASHER
LONG JCBC BOLT
2
WITH WASHER
BARREL NUT
3
LOCK WASHER
4
5
FLAT WASHER
6
HEX NUT
7
ALLEN WRENCH
8
WRENCH
WOOD PLUG
9
Screw driver
(Not Provided)
STEP 2
QTYFIGURE
PACK IS LOCATED IN 107223(B1)
8 PCS
4 PCS
2 PCS
2 PCS
2 PCS
2 PCS
1 PC
1 PC
2 PCS
7
1
D
2
7
C
B
C
A
8
6
4
B
5
Protection surface
E
STEP 3
F
www.coastercompany.com
PAGE 2 OF 2
Loading...