Page 1
100165
BAR
ASSEMBLY
2013/7/16
Page 2
ITEM : 100165
ASSEMBLY INSTRUCTION
TOP WOOD
1PC
SHELF GLASS
2PCS
BOTTOM WOOD
1PC
SIDE WOOD
1PC
CENTER SUPPORT BAR
2PCS
LARGE SHELF
CROSS BAR
2PCS
BOTTOM SHELF
CROSS BAR
1PC
GLASS HOLDER
3PCS
SMALL CROSS BAR
1PC
Page 2 of 6
www.coastercompany.com
Page 3
ITEM : 100165
CAM-BOLT
GLASS BOLT
SMALL SCREW
BOLT
LARGE SCREW
PLASTIC WASHER
SMALL WASHER
SMALL ALLEN BOLT
ALLEN BOLT
COVER LABEL
LARGE WASHER
LARGE ALLEN BOLT
GLUE
1PC
1PC
1PC
1PC
1PC
1PC
1PC
Page 4
ITEM : 100165
STEP 1
1. Paste GLUE (20) on WOOD DOWEL (3) and insert into
TOP WOOD (A) and SIDE WOOD (D).
(Use the glue when securing dowels to ensure the
integrity of the structure.)
2. Screw CAM-BOLT (2) and WOOD DOWEL (3) and
ROUND IRON (17) onto TOP WOOD (A). Install
GLASS HOLDER (H) using SMALL SCREW (6).
3. Attach ROUND IRON (17) using BOLT (7) and attach
LARGE SHELF CROSS BAR (F) using BOLT (7).
4. Insert SIDE WOOD (D) into TOP WOOD (A) then install
CAM-LOCK (1) and place COVER LABELS (14) on the
screw hole after tightening.
5. Screw GLASS METAL (4) and SMALL SCREW (6) onto
SIDE WOOD (D).
STEP 2
1. Place PLASTIC WASHER (9) into BOLT (7) then install BOLT (7) and
GLASS METAL (4) onto SHELF GLASS (B) and then tighten with GLASS BOLT (5).
2. Place PLASTIC WASHER (9) into BOLT (7) then tighten with
LARGE SHELF CROSS BAR (F).
Page 5
ITEM : 100165
STEP 3
1. Place PLASTIC WASHER (9) into BOLT (7) then install
BOLT (7) and GLASS METAL (4) onto SHELF GLASS (B)
and then tighten with GLASS BOLT (5).
2. Place PLASTIC WASHER (9) into BOLT (7) then tighten with
BOTTOM SHELF CROSS BAR (G).
STEP 4
1. Insert FOOT PIN (13) onto BOTTOM WOOD (C).
Page 6
ITEM : 100165
STEP 5
1. Paste GLUE(20) on WOOD DOWEL(3) and insert
into SIDE WOOD(D) and BOTTOM WOOD(C).
(Use the glue when securing dowels to ensure the
integrity of the structure).
2. Place PLASTIC WASHER (9) into
BOTTOM SHELF CROSS BAR (G), screw WOOD DOWEL (3)
onto SIDE WOOD (D). Insert BOTTOM WOOD (C)
into SIDE WOOD (D) and tighten using LARGE SCREW (8).
3. Place SPRING WASHER (18) and LARGE WASHER (16) onto
ALLEN BOLT (12) and then screw it to BOTTOM WOOD (C)
with BOTTOM SHELF CROSS BAR (G) and
PLASTIC WASHER (9).
4. Place SMALL CROSS BAR (I) into SHELF GLASS (B), Insert
LARGE ALLEN BOLT (19) into SMALL CROSS BAR (I)
and CENTER SUPPORT BAR (E) before tighten using
LARGE SCREW (8).
5. Screw CENTER SUPPORT BAR (E) to the screw with
SIDE WOOD (D) using SMALL SCREW (6).
STEP 6
1. Place SMALL WASHER (10) into SMALL ALLEN BOLT (11),
screw SMALL ALLEN BOLT (11) onto
CENTER SUPPORT BAR (E).
2. Screw CENTER SUPPORT BAR (E) to the screw with
SIDE WOOD (D) using SMALL SCREW (6).
FINISH
Loading...