CNB NGE2055F User Manual

XNET Network Box Camera Installation Manual

XNET Network Box Camera

(NGE2055F)

Installation Manual

Ver. 1.2

2 / 17

XNET Network Box Camera Installation Manual

About this Manual

A compatibility and durability test ensured this product’s high performance.

This installation guide is for XNET Network Box Camera users only, and it describes operations

related to XNET Network Box Camera.

Please read this manual thoroughly paying attention to cautions and warnings before using the

product even if you have used similar products before.

Important Notices

The copyright of this manual is owned by CNB Technology Inc.

It is illegal to copy and distribute this manual without permission.

Damages caused by use of not suggested parts and misuse will not be applicable for support.

Contact the store or the manufacturer immediately if (you think) there is any problem with the

product.

Contact the store or the manufacturer before disassembling the product for alteration or repair.

XNET is a trademark of CNB Technology Inc.

This product complies for CE (Europe) and FCC (USA) regulations for industrial/home use

electrical device.

INFORMATION

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at his own expense.

3 / 17

XNET Network Box Camera Installation Manual

Index

1 . About XNET ..................................................................................................................... 4

1.1. About XNET ......................................................................................................................... 4

1.2. Features of XNET ................................................................................................................ 4

1.3. Applications ......................................................................................................................... 4

2 . About the Product........................................................................................................... 5

2.1. Contents .............................................................................................................................. 5

2.2. Product Information ............................................................................................................. 5

2.3. Functions and Designations ................................................................................................ 6

2.3.1. Side View .................................................................................................................................... 6

2.3.2. Front / Rear View ........................................................................................................................ 7

2.3.3 Connecting to Alarm devices ........................................................................................................ 9

3 . Software Installation ..................................................................................................... 10

3.1. Connecting XNET to network ............................................................................................. 10

3.2. Installing IP-Installer Software and Configuring IP address ................................................. 11

3.2.1. About IP-Installer ....................................................................................................................... 11

3.2.2. Configuring IP Address .............................................................................................................. 11

4 . Using Web Viewer ......................................................................................................... 13

4.1. Logging In ......................................................................................................................... 13

4.2. Web Viewer Page .............................................................................................................. 14

5 . Specifications ............................................................................................................... 16

4 / 17

XNET Network Box Camera Installation Manual

1. About XNET

11..11.. AAbboouutt XXNNEETT

XNET is an internet based security and surveillance system that is compatible with various network conditions

through easy installation and user interface as well as multi-functional compressor Codec such as MJPEG and

H.264. XNET provides stable real-time surveillance by real time video/ audio at 1080P level, local storage for

any network problems, and hybrid IP technology that can be used with existing analog CCTV devices.

11..22.. FFeeaattuurreess ooff XXNNEETT

 Most advanced Video/ Audio compression technology (MJPEG/H.264, G.711)

 Progressive technology - Progressive scan makes the image sharp and clear without ghost effect.

 Hybrid IP Technology - CCTV analog video output can be used for existing analog CCTV devices.

 Transmission of Multi-Codec stream - Live video signal can be compressed to MJPEG or H.264 and sent to

meet various applications of network or user.

 2-way Audio Communication (Bi-directional voice communication between Client’s PC and XNET)

 Smart Event feature - On the top of motion detection and sensor/alarm feature, pre- and post- alarm

feature allows automated surveillance without an attendant’s monitoring.

 Install/ Operation Wizard - Install/ Operation Wizard not only makes it easy for installers and users, but

also offers a unified installation setup for massive scale installations.

 Up to 3 motion detection areas

 Motion Detection – Alarm output and Video/ Audio data transmission to FTP site or e-mail upon detecting

a motion.

 Supports Various resolutions

-1080P(1920X1080),SXGA(1280X1024),SXGA(1280X960),720P(1280X720),XGA(1024X768),

D1(720X480), VGA(640x480),CIF(352x240),QVGA(320X240),

 RS-485 interface for Remote Pan/Tilt control
 Remote Control over the network for software upgrade

11..33.. AApppplliiccaattiioonnss

 Surveillance (Building, store, factory, parking lot, financial institutions, government buildings, military

facilities, etc.)

 Remote video monitoring (Hospital, kindergarten, traffic monitoring, remote branch office, weather,

environment preservation, and illegal disposal of trash, etc.)

 Real time broadcasting over the internet (Resort facility, parties, festivals, etc), remote business meetings,

and educational trainings, etc.

5 / 17

XNET Network Box Camera Installation Manual

Contents

Description

Additional info.

XNET product

Network Box Camera (Lens not included)

Auto Iris Lens Plug

Connection plug for Auto-Iris control signal

Power adapter and

AC power cord

Input: 100~240VAC 50-60Hz
Output : 12VDC, 2A

Terminal Plug

2P * 1ea, 6P * 1ea

Power Jack

2P Terminal plug connect the power

CD

Software and User’s manual

XNET

(NGE2055F)

Install CD

IP-Installer

Viewer Program (CNB-CMS)

Network Camera (Lens not

included)

A software that assigns
an IP address to the product

A software that monitors and records
and Audio and Video signal from the
device (using up to 32 channels is
recommended)

2. About the Product

22..11.. CCoonntteennttss

Please make sure the following contents are included when you open the package.

22..22.. PPrroodduucctt IInnffoorrmmaattiioonn

6 / 17

XNET Network Box Camera Installation Manual

*Please ask at the store about purchasing lens separately.

Auto Iris control plug

1/4”. 20 UNC(20 THREAD)
L : 4.5mm +-0.2mm (ISO standard)
or 0.197” (ASA standard)

C Ring

Attach both C Ring and CS

Ring to use C-mount Lens

CS Ring

Attach CS Ring only to use
CS-mount Lens

CS Ring Fix Screw
Lens(Sold Separately)

Mounting Screw Hole

22..33.. FFuunnccttiioonnss aanndd DDeessiiggnnaattiioonnss

22..33..11.. SSiiddee VViieeww

Figure 2-1 Network Camera Side view

Lens (Sold separately): C or CS mount/ Fixed or Vari-Focal DC Auto-Iris lens.

* Using the DC Iris lens, Please change the DC mode after adjust the Focus on ESC mode

 Auto-Iris Control Plug: Plug for Auto-Iris control

The following shows each pin connection:

Strip 8mm of outer jacket of the lens cable, and then strip 2 mm of inner wires to solder them to the

connection plug.