CMS TX050 Programming Manual

CNC Machining Centres

C.M.S.

S.p.A.

Costruzioni Macchine Speciali

Via Antonio Locatelli, 49
(I) - 24019 ZOGNO (Bergamo)
Tel. [phone] - Fax [phone]

Autore Fausto Zanardi C:\DATI\WORD\Refrigeratori\TexaProgTermFTX050.doc Pag. 1

Servizio Assistenza

T E X A C h i l l i n g U n i t

Electronic Thermostat TX050

Convert from Celsius to Fahrenheit

=====================================================================

(english)

Created date 28/01/2015 10:55:00

Last saving date 28/01/2015 11:55:00

1.01 The Display normally shows the internal electrical cabinet temperature,
to get into the parameters’ area, press simultaneously the buttons:

and

Keep them pressed as long as (around 7 seconds) to get the parameter HHyy

1.02 Release the buttons than press them again as long as to get the word LL22
WARNING: If no buttons are pressed within 10 seconds, the unit exit itself

the parameters’ area, showing back the cabinet temperature

1.03 Release the buttons,
The Display shows parameter HHyy

1.04 Select the parameter CCFF by playing on button or button

1.05 Hit the button
The Display shows the parameter’s value which is CC°°

1.06 Select FF°° by playing on button or button

Autore Fausto Zanardi C:\DATI\WORD\Refrigeratori\TexaProgTermFTX050.doc pag 2

1.07 Hit the button to confirm

1.08 Wait until the unit quits the parameters’ area (around 10 seconds)

1.09 press simultaneously the buttons:

and

Keep them pressed as long as (around 7 seconds) to get the parameter HHyy

1.10 Release the buttons than press them again as long as to get the word LL22

1.11 Release the buttons,
The Display shows parameter HHyy

1.12 Select parameter UUSS by playing on button or button

1.13 Set its value according to the following list

1.14 Following the same method set the parameter LLSS

1.15 Following the same method go on setting all the other parameters except the parameter SSEETT

1.16 At the end, wait until the unit quit the parameters’ area (around 10 seconds).
The Display shows the cabinet’s temperature

1.17 Hit the button
The Display shows the SET’s value

1.18 Alter the value according to the list

Autore Fausto Zanardi C:\DATI\WORD\Refrigeratori\TexaProgTermFTX050.doc pag 3

1.19 Hit the button