How it Works
CMO
Loading...
V320B1-P01
Specification
21 pgs1.03 Mb0

CMO V320B1-P01 Specification

Download
Global LCD Panel Exchange Center
A
TFT LCD Approval Specification
MODEL NO.:V320B1-P01
Customer:
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
Approval
pproved by:
Note:
LCD TV Head Division
AVP
QRA Dept.
DDIII DDII DDI
Approval Approval Approval Approval
ኣ೜ݛ ޕޫ ៴֮ᙘ ֮ࣥᜣ
ພ஡ၼ
TVHD / PDD
LCD TV Marketing and Product Management Division
Product Manager
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
႓խࢣ ຫمࡵ
1
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
Approval
- CONTENTS -
REVISION HISTORY
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 CHARACTERISTICS
1.3 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASED ON CMO MODULE V320B1-L04)
2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)
2.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD OPEN CELL
3.2 RSDS CHARACTERISTICS
4. BLOCK DIAGRAM
4.1 TFT LCD OPEN CELL
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 COLOR DATA INPUT ASSIGNMENT
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
------------------------------------------------------- 3
------------------------------------------------------- 4
------------------------------------------------------- 5
------------------------------------------------------- 7
------------------------------------------------------- 8
------------------------------------------------------- 9
------------------------------------------------------- 12
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
8. PACKAGING
8.1 PACKING SPECIFICATIONS
8.2 PACKING METHOD
9. DEFINITION OF LABELS
9.1 OPEN CELL LABEL
9.2 CARTON LABEL
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
10.2 SAFETY PRECAUTIONS
11. MECHANICAL DRAWING
------------------------------------------------------- 14
------------------------------------------------------- 17
------------------------------------------------------- 19
------------------------------------------------------- 20
------------------------------------------------------- 21
2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
Approval
REVISION HISTORY
Version Date
Ver 2.0 Aug 22, 2006 All All Approval Specification was first issued.
Page
(New)
Section Description
3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V320B1- P01 is a 32” TFT Liquid Crystal Display module. This module supports 1366 x 768 WXGA format and
can display true 16.7M colors ( 8-bit colors).
1.2 CHARACTERISTICS
CHARACTERISTICS ITEMS SPECIFICATIONS
Screen Diagonal [in] 32.02 Pixels [lines]
Active Area [mm] 708.954(H) x 398.592 (V) (32.02” diagonal)
Sub -Pixel Pitch [mm] 0.1730 (H) x 0.5190 (V)
Pixel Arrangement RGB vertical stripe Weight [g] TYP. 1200 ʳ
Physical Size [mm] 723.35(W) x 414.4(H) x 2(D) Typ.
Display Mode Transmissive mode / Normally black Contrast Ratio 1200:1 Typ.
Glass thickness (Array/CF) [mm] 0.7 / 0.7 Viewing Angle (CR>20) +88/-88(H),+88/-88(V) Typ.
Color Chromaticity R=(0.660, 0.329)
Cell Transparency [и]
Polarizer (CF side) Super Wide View Anti-glare coating, 718.75(H) x 409.8(w).
Polarizer (TFT side) Super Wide View, 718.75(H) x 409.8(w), Hardness: 3H
1366×768
(Typical value measured at CMO’s module)
(Typical value measured at CMO’s module)
G=(0.278, 0.598) B=(0.130, 0.123) W=(0.316, 0.371) *Please refer to “color chromaticity” on p.14
4.8%Typ. (Typical value measured at CMO’s module)
Hardness: 3H
Approval
1.3 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Weight 1100 1200 1300 g -
I/F connector mounting position
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
(2) Connector mounting position
The mounting inclination of the connector makes the screen center within ±0.5mm as the horizontal.
+/- 0.5mm
4
(2)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASED ON CMO MODULE V320B1-L04)
Item Symbol
Storage Temperature TST -20 +60 ºC (1), (3) Operating Ambient Temperature T Altitude Operating A OP 0 5000 M (3) Altitude Storage A ST 0 12000 M (3)
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta Љ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation..
OP
Min. Max.
Value
0 50 ºC (1), (2), (3)
Unit Note
Approval
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
10
Storage Range
Temperature (ºC)
8060-20 400 20-40
Note (2) The maximum operating temperature is based on the test condition that the surface temperature of
display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.
Thermal management should be considered in your product design to prevent the surface temperature of
display area from being over 65 ºC. The range of operating temperature may degrade in case of improper
thermal management in your product design.
Note (3) The rating of environment is base on LCD module. Leave LCD cell alone, this environment condition can’t
be guaranteed. Except LCD cell, the customer has to consider the ability of other parts of LCD module
and LCD module process.
5
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)
Storage Condition : With shipping package.
Storage temperature range : 25±5 к
Storage humidity range : 50±10%RH
Shelf life : a month
2.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
Approval
Item Symbol
Power Supply Voltage VAA -0.3 +14.0 V
Power Supply Voltage VGH -0.3 +30.0 V
Power Supply Voltage VGL -10.0 -0.3 V
Logic Input Voltage VIN -0.3 4.3 V
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation should
be restricted to the conditions described under Normal Operating Conditions.
Value
Min Max
Unit
Note
(1)
6
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE Ta = 25 ± 2 ºC
Value
Unit Note
interface
Parameter Symbol
VGH 22 23 24 V
VGL -6.0 -5.5 -5.0 V
Power Supply Voltage
VAA 12.95 13.25 13.55 V
V33V(3.3V) 3.1 3.3 3.5 V
VREF 12.3 12.5 12.7 V
IGH - 7.5 - mA
Power Supply Current
IGL - 2.5 - mA IAA - 350 - mA
I3.3V - 150 - mA Input High Threshold Voltage VIH 2.7 - 3.3 V CMOS Input Low Threshold Voltage V
0 - 0.7 V
IL
Min. Typ. Max.
Approval
3.2 RSDS CHARACTERISTICS
Item Symbol Condition
RSDS high input Voltage
RSDS low input Voltage V
RSDS common mode input voltage range
RSDS Input leakage current
Note (1) V
Note (2) V
Note (3) V
= (VCLKP + VCLKN)/2 or V
CMRSDS
DIFFRSDS
= VCLKP - VCLKN or V
= 1.2V(VDDD = 3.3V)
CMRSDS
V
DIFFRSDS
DIFFRSDS
V
CMRSDS
I
DL
V
CMRSDS
V
CMRSDS
V
DIFFRSDS
D
CMRSDS
DIFFRSDS
N ,CLKO ,CLPN
xx
= VDXXP - VDXXN
Ta = -10~+85 ºC
Value
Mi
n
Typ Max
Unit
= +1.2 V (1) 100 200 - mV
= +1.2 V (1) - -200 -100 mV
= 200 mV (2)
P,
D
xx
VSSD+
0.1
Note(3) VSSD+1.2 V
-10 - 10
ӴA
= (VDXXP + VDXXN)/2
7
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
4. BLOCK DIAGRAM
4.1 TFT LCD OPEN CELL
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
Approval
TFT LCD PANEL
Y BOARD
(1366x3x768)
X(R) BOARD
RSDS SIGNAL INPUT
Connector Part No.: STARCONN 089H55-000000-G2-C or compatible
X(L) BOARD
8
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
Pin assignment
CN1(XL) Connector Pin Assignment
Pin No. Symbol Description Pin No. Symbol Description
1 VCM VCM Power supply 29 ATP1 2 VCM VCM Power supply 30 A_R1P 3 GM14 4 CON2 5 GM13 6 GM12 7 GM11 8 GM10
9 GM9 10 GM8 11 GND 12 A_B1P 13 A_B1M 14 A_B0P 15 A_B0M 16 A_G1P 17 A_G1M 18 A_G0P 19 A_G0M 20 DRL1
Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply
Ground A-Path RSDS data signal (Blue1) A-Path RSDS data signal (Blue1) A-Path RSDS data signal (Blue0) A-Path RSDS data signal (Blue0)
A-Path RSDS data signal (Green1) A-Path RSDS data signal (Green1)
A-Path RSDS data signal (Green0)
A-Path RSDS data signal (Green0)
Control the direction of start pulse
for data driver
31 A_R1M 32 A_R0P 33 A_R0M 34 VAA 35 VAA 36 GM7 37 GM6 38 GM5 39 GM4 40 GM3 41 GM2 42 CON1 43 GM1 44 GND 45 GND 46 STV_R 47 OE 48 GRL1
A-Path RSDS data latch A-Path RSDS data signal (Red1) A-Path RSDS data signal A-Path RSDS data signal (Red0) A-Path RSDS data signal (Red0)
Driver Power supply
Driver Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply
Ground Ground
Scan driver start pulse2
Scan driver output enable
Control the direction of start pulse
for scan driver
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
Approval
(Red1)
21 POL 22 V33V 23 V33V 24 ASTH_R 25 ASTH 26 GND 27 A_CLKP 28 A_CLKM
A-Path source driver start pulse2 A-Path source driver start pulse1
polarity invert Logic Power supply Logic Power supply
Ground Data driver clock Data driver clock
49 CKV 50 STV 51 VGL 52 VGH 53 GND 54 NC No connection 55 RP2 Line repair trace
Scan driver clock
Scan driver start pulse1
Driver Power supply Driver Power supply
Ground
9
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
CN2(XR) Connector Pin Assignment
Pin No. Symbol Description Pin No. Symbol Description
1 VCM VCM Power supply 29 BTP1 2 VCM VCM Power supply 30 B_R1P 3 GM14 4 CON2 5 GM13 6 GM12 7 GM11 8 GM10
9 GM9 10 GM8 11 GND 12 B_B1P 13 B_B1M 14 B_B0P 15 B_B0M 16 B_G1P 17 B_G1M 18 B_G0P 19 B_G0M 20 DRL1
Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply
Ground B-Path RSDS data signal (Blue1) B-Path RSDS data signal (Blue1) B-Path RSDS data signal (Blue0) B-Path RSDS data signal (Blue0)
B-Path RSDS data signal (Green1) B-Path RSDS data signal (Green1)
B-Path RSDS data signal (Green0)
B-Path RSDS data signal (Green0)
Control the direction of start pulse
for data driver
www.panelook.com
31 B_R1M 32 B_R0P 33 B_R0M 34 VAA 35 VAA 36 GM7 37 GM6 38 GM5 39 GM4 40 GM3 41 GM2 42 CON1 43 GM1 44 GND 45 GND 46 NC No connection 47 VSCM VSCM Power supply 48 VREF
B-Path RSDS data latch B-Path RSDS data signal (Red1) B-Path RSDS data signal B-Path RSDS data signal (Red0) B-Path RSDS data signal (Red0)
Driver Power supply
Driver Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply Gamma Power supply
Ground Ground
Gamma Power supply
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
Approval
(Red1)
21 POL 22 V33V 23 V33V 24 BSTH_R 25 BSTH 26 GND 27 B_CLKP 28 B_CLKM
Note (1) CN1Ε2 Connector Part No.: STARCONN 089H55-000000-G2-C or equal.
B-Path source driver start pulse2 B-Path source driver start pulse1
polarity invert Logic Power supply Logic Power supply
Ground Data driver clock Data driver clock
49 NC No connection 50 NC No connection 51 STV 52 VGL 53 GND 54 RP2 Line repair trace 55 GND
Driver Power supply Driver Power supply
Ground
Ground
10
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
5.2 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color.
The higher the binary input, the brighter the color. The table below provides the assignment of color versus data
input.
Data Signal
Color
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
Black
Red
Green
Basic
Colors
Gray
Scale
Of
Red
Gray
Scale
Of
Green
Gray
Scale
Of
Blue
Note (1) 0: Low Level Voltage, 1: High Level Voltage
Blue
Cyan
Magenta
Ye ll ow
White
Red(0) / Dark
Red(1)
Red(2)
:
:
Red(253)
Red(254)
Red(255)
Green(0) / Dark
Green(1)
Green(2)
:
:
Green(253)
Green(254)
Green(255)
Blue(0) / Dark
Blue(1)
Blue(2)
:
:
Blue(253)
Blue(254)
Blue(255)
0
0
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
Red Green Blue
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
1
0
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
1
1
1
0
1
1
0
1
1
0
0
0
0
0
0
:
:
0
0
0
0
0
0
0
0
0
1
0
0
:
:
0
1
0
0
0
1
0
0
0
0
0
0
:
:
1
0
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Approval
0
0
0
0
0
0
1
1
1
1
1
1
0
0
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
1
0
0
1
:
:
:
:
1
0
0
1
1
1
11
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
Approval
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
Frame Rate
Vertical Active Display Term
Horizontal Active Display Term
Note: Since this module is operated in DE only mode, Hsync and Vsync input signals should be set to low logic level or
ground. Otherwise, this module would operate abnormally.
Total Tv 778 795 888 Th Tv=Tvd+Tvb Display Tvd 768 768 768 Th ­Blank Tvb 10 27 120 Th ­Total Th 1442 1798 1936 Tc Th=Thd+Thb Display Thd 1366 1366 1366 Tc ­Blank Thb 76 432 570 Tc -
Fr5 47 50 53 Hz Fr
6 57 60 63 Hz
DE
DCLK
DE
DATA
Th
Tc
INPUT SIGNAL TIMING DIAGRAM
Tv
Tvd
Thd
Thb
Valid display data (1366 clocks)
Tvb
12
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
d
d
d
d
d
LVDS RECEIVER INTERFACE TIMING DIAGRAM
RXCLK+/-
RXn+/-
Tlvsu
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
Approval
Tc
Tlvhd
1T
14
3T
14
5T
14
7T
14
9T
14
11T
14
13T
14
6.2 POWER ON/OFF SEQUENCE
To prevent a latch-up or DC operation of LCD module, the power on/off sequence should follow the conditions
shown in the following diagram.
0.9 V
0.1V
CC
CC
CC
0.9 V
0.1V
DD
T
1
T2
3
T
4
T
Power Supply
V
0.5msdT1d10ms
0
T
2
50ms
0
T
3
50ms
4
500ms
T
CC
0V
Signals
0V
Power On
Backlight (Recommended)
500msdT5
100msdT6
VALI D
Power Off
50%
T
5
50%
6
T
Power ON/OFF Sequence
13
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
Approval
Note.
(1) The supply voltage of the external system for the module input should be the same as the definition of Vcc.
(2) Please apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD operation of
the LCD turns off, the display may, instantly, function abnormally.
(3) In case of
VCC = off level, please keep the level of input signals on the low or keep a high impedance.
(4) T4 should be measured after the module has been fully discharged between power on/off periods.
(5) I
nterface signal shall not be kept at high impedance when the power is on.
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit Ambient Temperature Ta Ambient Humidity Ha
25r2
50r10 Supply Voltage VCC 5.0 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" Inverter Current I
Inverter Driving Frequency F
L
L
4.80.5 583
7.2 OPTICAL SPECIFICATIONS
The relative measurement methods of optical characteristics are shown as below. The following items should be
measured under the test conditions described in 7.1 and stable environment shown in Note (5).
Item Symbol Condition Min. Typ. Max. Unit Note
Red
Green
Color
Chromaticity
Blue
White
Center Transmittance T% - 4.8 - % (1), (7)
Contrast Ratio CR
Response Time
White Variation
Horizontal
Viewing Angle
Ver tical
Rcx Rcy 0.329
Gcx
=0q, TY =0q
T
Gcy 0.598 Bcx
Standard light source “C”
x
Viewing Normal Angle
Bcy 0.123
Wcx
Wcy
T
=0q, TY =0q
x
With CMO Module
=0q, TY =0q
Gray to
gray
average
GW
T
x
With CMO
Module@60Hz
=0q, TY =0q
T
x
With CMO Module
Tx+
T
x
TY+
T
Y
-
-
CRt20
With CMO Module
0.660
0.278
-
0.130
0.316
0.371
1200 - - (1), (3)
-
6.5 12
- 1.3 - (1), (6)
80 88 ­80 80 80
88 ­88 ­88 -
o
C
%RH
mA
KHz
-
-
-
-
-
-
-
-
-
ms (4)
Deg. (1), (2)
(0),(5)
Note (0) Light source is the standard light source “C” which is defined by CIE and driving voltages are based on suitable
gamma voltages. The calculating method is as following
：
1. Measure Module’s and BLU’s spectrums. White is without signal input and R, G, B are with signal input.
BLU (for V320B1-L04) is supplied by CMO.
2. Calculate cell’s spectrum.
14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
T
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
Approval
3. Calculate cell’s chromaticity by using the spectrum of standard light source “C”
Note (1) Light source is the BLU which is supplied by CMO and driving voltages are based on suitable gamma voltages.
Note (2) Definition of Viewing Angle (Tx, Ty):
Viewing angles are measured by EZ-Contrast 160R (Eldim)
Normal
Tx = Ty = 0º
Ty- Ty
TX- = 90º
6 o’clock
T
y- = 90º
x-
y-
Note (3) Definition of Contrast Ratio (CR):
The contrast ratio can be calculated by the following expression.
Contrast Ratio (CR) = L255 / L0
L255: Luminance of gray level 255
L 0: Luminance of gray level 0
CR = CR (1) ,where CR (X) is corresponding to the Contrast Ratio of the point X at the figure in Note (6).
Tx
Tx
y+
12 o’clock direction
T
y+ = 90º
x+
TX+ = 90º
Note (4) Definition of Gray-to-Gray Switching Time:
100%
90%
Optical
Response
10%
0%
Gray to gray Switching time
The driving signal means the signal of gray level 0, 63, 127,191, and 255.
Gray to gray average time means the average switching time of gray level 0, 63,127,191,255
to each other.
15
Gray to gray Switching time
ime
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Note (5) Measurement Setup:
The LCD module should be stabilized at given temperature for 60 minutes to avoid abrupt temperature
change during measuring. In order to stabilize the luminance, the measurement should be executed after
lighting Backlight for 60 minutes in a windless room.
LCD Module
LCD Panel
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
Approval
Center of the Screen
Note (6) Definition of White Variation (GW):
Measure the luminance of gray level 255 at 5 points
GW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]
where L (X) is corresponding to the luminance of the point X at the figure below.
Display Color Analyzer
(Minolta CA210)
Light Shield Room
(Ambient Luminance < 2 lux)
Horizontal Line
D
D/4 D/2 3D/4
1 2
5
X
: Test Point
X=1 to 5
W
W/4
W/2
Vertical Line
3W/4
Note (7) Definition of Transmittance(T%):
Module is without signal input.
Luminance of LCD module
Transmittance =
Luminance of backlight
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
3 4
Active Area
Ϡ 100%
16
www.panelook.com
Global LCD Panel Exchange Center
8. PACKAGING
8.1 PACKING SPECIFICATIONS
(1) 12 LCD TV Panels / 1 Box
(2) Box dimensions : 970 (L) X 640 (W) X 322 (H)
Weight : approximately 28Kg ( 12 panels per box)
8.2 PACKING METHOD
Figures 8-1 and 8-2 are the packing method
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
Approval
The design packing top layer for empty tray
LCD Panel
Carton Label
Carton
Figure.8-1 packing method
17
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
Approval
Film
Sea Transportation
Corner Protector:L1850*50*50mm
L1130*50*50mm Pallet:L1300*W1000*H140mm Pallet Stack:L1300*W1000*H2072mm Gross:352kg
PE Sheet
PP Belt
Carton Label
Figure.8-2 packing method
18
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
9. DEFINITION OF LABELS
9.1 OPEN CELL LABEL
The barcode nameplate is pasted on each open cell as illustration for CMO internal control.
9.2 CARTON LABEL
The barcode nameplate is pasted on each box as illustration, and its definitions are as following explanation
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
Approval
V320B1-P01
XXXXXXXXXXXXXX
P.O. NO.
Parts ID.
Carton ID.
XXXXXXXXXXXXXX
(a) Model Name: V320B1– P01
(b) Carton ID: CMO internal control
(c) Quantities: 12
Quantities 12
Made in Taiwan
19
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
Approval
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
(1) Do not apply rough force such as bending or twisting to the product during assembly.
(2) To assemble backlight or install module into user’s system can be only in clean working areas. The dust and
oil may cause electrical short or worsen the polarizer.
(3) It’s not permitted to have pressure or impulse on the module because the LCD panel will be damaged.
(4) Always follow the correct power sequence when the product is connecting and operating. This can prevent
damage to the CMOS LSI chips during latch-up.
(5) Do not pull the I/F connector in or out while the module is operating.
(6) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily
scratched.
(7) It is dangerous that moisture come into or contacted the product, because moisture may damage the product
when it is operating.
(8) High temperature or humidity may reduce the performance of module. Please store this product within the
specified storage conditions.
(9) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the response
time will become slowly.
10.2 SAFETY PRECAUTIONS
(1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of
contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
(2) After the product’s end of life, it is not harmful in case of normal operation and storage.
20
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
11. Mechanical Drawing
www.panelook.com
Issued Date: Aug. 22, 2006
Model No.: V320B1-P01
Approval
奇美電子股份有限公司
%*+/'+
21
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use