Global LCD Panel Exchange Center
www.panelook.com
TFT LCD Approval Specification
FUNAI MODELNO. TLCD10CME011
MODEL NO.:V315B6-C02
RoHS Verified
Issued Date: Oct. 22 , 2009
CMO Model No.: V315B6 -C02
Approval
Customer:
FUNAI
Approved by:
Note:
TV Product Marketing & Management Div
Approved By
Chao-Chun Chung
Reviewed By
Prepared By
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
LCD TV Marketing and Product Management Div.
QRA Dept. Product Development Div.
Kc-Ko WT Lin
CY Chang Lee-Lee Chang
1
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Oct. 22 , 2009
CMO Model No.: V315B6 -C02
Approval
- Contents -
Record of Revision ----------------------------------------------- 3
1.0 Handling Precautions ----------------------------------------------- 4
2.0 General Description ----------------------------------------------- 5
3.0 Cell Outline ----------------------------------------------- 6
4.0 Storage Conditions ----------------------------------------------- 13
5.0 Packing Method ----------------------------------------------- 14
2.1 Characteristics
3.1 PAD Design
3.2 OLB PAD Assignment
3.3 Operating condition
5.1 LABEL ---------------------------------------------------------
----------------------------------------------- 5
----------------------------------------------- 7
----------------------------------------------- 9
----------------------------------------------- 12
14
5.2 PACKING SPECIFICATIONS ---------------------------------------------------------
5.3 PACKING METHOD
----------------------------------------------- 15
14
6.0 Others ----------------------------------------------- 17
2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
Version Date
Ver 2.0
Oct. 7,’09 All
Page
(New)
Section Description
All
www.panelook.com
Issued Date: Oct. 22 , 2009
CMO Model No.: V315B6 -C02
Approval
Record of Revision
Approval Specification was first issued.
3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Oct. 22 , 2009
CMO Model No.: V315B6 -C02
Approval
1.0 Handling Precautions
▪ The LCD panel is made of glass and may break or crack if dropped on a hard surface. It is
necessary to handle it carefully.
▪ Since front polarizer is easily damaged, pay attention not to scratch it.
▪ When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth gently.
▪ Do not touch the front screen surface when assembling.
▪ The information contained herein is presented only as a guide for the
representative applications of Chi Mei Optoelectronics Crop. products and is
not intended to guarantee any design or license any intellectual property right.
Chi Mei Optoelectronics Crop. takes no responsibility for any problems
related to any intellectual property right of a third party resulting from the use
of Chi Mei Optoelectronics Crop. products.
4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Oct. 22 , 2009
CMO Model No.: V315B6 -C02
Approval
2.0 General Description
This specification is applied to the Type V315B6 TFT/LCD cell. This cell is designed for a display
unit for TV application.
The screen format is intended to support the WXGA (1366(H) x 768(V)) screen
2.1 Characteristics
CHARACTERISTICS ITEMS SPECIFICATIONS
Screen Diagonal [in] 31.5
Pixels[lines] 1366768
Active Area [mm] 697.6845 (H) x 392.256 (V)
Sub -Pixel Pitch [mm] 0.17025(H) x 0.51075 (V)
Pixel Arrangement RGB vertical stripe
Weight [g] TYP. 1125g
Physical Size [mm] 716(W) x 410.8(H) x 2.00(D) Typ.
Display Mode Transmissive mode / Normally black
Contrast Ratio (3000:1) Typ.
(Typical value measured at CMO’s module)
Glass thickness (Array/CF)[mm] 0.7 / 0.7
Viewing Angle(CR>20)
+88/-88(H),+88/-88(V) Typ. (CR≥20)
(Typical value measured at CMO’s module)
Color White Color Filter
R=(0.642, 0.332)
G=(0.277, 0.598)
B=(0.145, 0.066)
W=(0.285, 0.293)
*White color is calibrated value measured at Color
Filter by CMO’s module
Cell Transparency [㧑] (5.8)%Typ.
(Typical value measured at CMO’s module)
Polarizer (CF side) Wide View, Anti-glare coating,
709.7 (W) x 405 (H). Hardness: 3H
Polarizer (TFT side) Wide View, 709.7 (W) x 405 (H)
5
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
3.0 Cell Outline
The following figure shows cell outline.
www.panelook.com
Issued Date: Oct. 22 , 2009
CMO Model No.: V315B6 -C02
Approval
6
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
3.1 PAD Design
The following figure shows Data & Scan pad design.
Unit
㨇㨇㨇㨇
Data Pad
㨉㨉㨉㨉
㨇㨙㨙㨉
www.panelook.com
Issued Date: Oct. 22 , 2009
CMO Model No.: V315B6 -C02
Approval
7
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Oct. 22 , 2009
CMO Model No.: V315B6 -C02
Approval
㨇㨇㨇㨇
Scan Pad
㨉㨉㨉㨉
Unit
㨇㨙㨙㨉
8
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
3.2 OLB PAD Assignment
GATE
www.panelook.com
Issued Date: Oct. 22 , 2009
CMO Model No.: V315B6 -C02
Approval
9
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
SIGNAL
www.panelook.com
Issued Date: Oct. 22 , 2009
CMO Model No.: V315B6 -C02
Approval
10
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Oct. 22 , 2009
CMO Model No.: V315B6 -C02
Approval
Note1: NC is CMO reserve.
11
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
p
)
)
y
(
(
(
(
)
3.3 Operating condition
The following table describes operating condition at CMO cell inspection
www.panelook.com
Issued Date: Oct. 22 , 2009
CMO Model No.: V315B6 -C02
Approval
Item Cell Ins
Gate Vgh 23.0V
Vgl -5.5V
dGS -1.2us
dTg14.7us
Tg(Gate On Time
Tcrg(Writing Time
Frame Frequenc
Signal
Black) Vsig Center 8.78V
14.8us
14.8us
60Hz
White) Vsig Center 8.74V
Common Vcom Center 8.1V
Vcom Amplitude 0.00V
Vcom Adjustment ±0.5V
LC
Black) 0.77V
White
8.14V
dTg
Vsig
ection Condition
VsigC
dGS
VgH
Tg
Tcrg
VgL
12
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
4.0
ABSOLUTE RATINGS OF ENVIRONMENT
4.1 ABSOLUTE RATINGS OF ENVIRONMENT( BASED on LCD MODULE V315B6-L01)
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 +50 ºC (1), (2), (3)
Note (1) Temperature and relative humidity range is shown in the figure below.
www.panelook.com
Value
Min. Max.
Issued Date: Oct. 22 , 2009
CMO Model No.: V315B6 -C02
Approval
Unit Note
(a) 90 %RH Max. (Ta
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The maximum operating temperature is based on the test condition that the surface temperature of
display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.
Thermal management should be considered in final product design to prevent the surface temperature
of display area from being over 65 ºC. The range of operating temperature may degrade in case of
improper thermal management in final product design.
Note (3) The rating of environment is based on LCD module. Leave LCD cell alone, this environment
condition can’t be guaranteed. Except LCD cell, the customer has to consider the ability of other
parts of LCD module and LCD module process.
҇
40 ºC).
Relative Humidity (%RH)
100
90
80
60
40
20
10
Operating Range
Storage Range
Temperature (ºC)
13
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
80 60 -20 40 0 20 -40
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
5.0 Packaging
5.1 Label
5.1.1 PANEL LABEL
5.1.2 DENSE BOX AND CARTON LABEL
Model Name V315B6-C02
Panel Type 315WX01
Quantity 22
Case ID (CMO internal define)
Note1 Funai model no.:TLCD10CME011
www.panelook.com
Issued Date: Oct. 22 , 2009
CMO Model No.: V315B6 -C02
Approval
T6243036NY01
XXXXXXXXXXXXXXXX
5.2 PACKING SPECIFICATIONS
(1) 22 LCD TV Panels / 1 Box
(2) Dense box dimensions : 810(L) X 510 (W) X 156 (H)
(3) Weight : approximately 33.5Kg ( 22 panels per box)
14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
5.3 PACKING METHOD
Figures 5-1 and 5-2 are the packing method
www.panelook.com
Issued Date: Oct. 22 , 2009
CMO Model No.: V315B6 -C02
Approval
Figure.5-1 packing method
15
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Oct. 22 , 2009
CMO Model No.: V315B6 -C02
Approval
Figure.5-2 packing method
16
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
6.0 Others
If any doubt arises in relation to items not defined in this agreement or any articles in this
agreement, both parties shall discuss it with sincerity and arrive at a mutual decision.
www.panelook.com
Issued Date: Oct. 22 , 2009
CMO Model No.: V315B6 -C02
Approval
****** End Of Page ******
17
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Loading...