The information described in this technical specification is preliminary and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Oct. 22, 2007
CMO Model No.: V315B1 – C03
Funai Model NO.: TLCD100CME20
Record of Revision
VersionDate
Ver.2.0
Oct.22, ‘07
Page
(New)
All All Approval Specification was first issued.
Section Description
Approval
3
The information described in this technical specification is preliminary and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Oct. 22, 2007
CMO Model No.: V315B1 – C03
Funai Model NO.: TLCD100CME20
Approval
1.0 Handling Precautions
▪ The LCD panel is made of glass and may break or crack if dropped on a hard surface. It is
necessary to handle it carefully.
▪ Since front polarizer is easily damaged, pay attention not to scratch it.
▪ When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth gently.
▪ Do not touch the front screen surface when assembling.
▪ The information contained herein is presented only as a guide for the
representative applications of Chi Mei Optoelectronics Crop. products and is
not intended to guarantee any design or license any intellectual property right.
Chi Mei Optoelectronics Crop. takes no responsibility for any problems
related to any intellectual property right of a third party resulting from the use
of Chi Mei Optoelectronics Crop. products.
4
The information described in this technical specification is preliminary and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Oct. 22, 2007
CMO Model No.: V315B1 – C03
Funai Model NO.: TLCD100CME20
Approval
2.0 General Description
This specification is applied to the Type V315B1 TFT/LCD cell. This cell is designed for a display
unit for TV application.
The screen format is intended to support the WXGA (1366(H) x 768(V)) screen
2.1 Characteristics
CHARACTERISTICS ITEMS SPECIFICATIONS
Screen Diagonal [in] 31.51
Pixels[lines] 1366768
Active Area [mm] 697.6845 (H) x 392.256 (V)
Sub -Pixel Pitch [mm] 0.17025(H) x 0.51075 (V)
Pixel Arrangement RGB vertical stripe
Weight [g] TYP. 1175
Physical Size [mm] 716(W) x 410.8(H) x 2.00(D) Typ.
Display Mode Transmissive mode / Normally black
Contrast Ratio 1500:1 Typ.
(Typical value measured at CMO’s module)
Glass thickness (Array/CF)[mm] 0.7 / 0.7
Viewing Angle(CR>20)
+88/-88(H),+88/-88(V) Typ. (CR≥20)
(Typical value measured at CMO’s module)
Color White Color Filter
R=(0.650, 0.328)
G=(0.272, 0.587)
B=(0.135, 0.105)
W=(0.304, 0.329)
*White color is calibrated value measured at Color
Polarizer (TFT side) Wide View, 710.8 (W) x 406.6 (H)
5
The information described in this technical specification is preliminary and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Oct. 22, 2007
CMO Model No.: V315B1 – C03
Funai Model NO.: TLCD100CME20
3.0 Cell Outline
The following figure shows cell outline.
Approval
ڻႝηިҽԖϦљ
CHI MEI
6
The information described in this technical specification is preliminary and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version2.0
www.panelook.com
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.