CMO V296W1-L06 Specification
A
Global LCD Panel Exchange Center
TFT LCD Approval Specification
MODEL NO.: V296W1 - L06
Customer:
www.panelook.com
Issued Date: Oct. 06, 2003
Model No.: V296W1 - L06
Approval
pproved by:
Note:
Director
QRA Dept.
LCD TV Head Division
!"#
Liquid Crystal Display Division
TDDI
DDII DDI
Approval Approval Approval Approval
$%&
'()
*+,
-./
LCD TV Marketing and Product Management Dept.
Project Manager
012
1
-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.1
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
- CONTENTS -
REVISION HISTORY
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 BACKLIGHT UNIT
5.3 BLOCK DIAGRAM OF INTERFACE
5.4 LVDS INTERFACE
5.5 COLOR DATA INPUT ASSIGNMENT
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
8. PACKAGING
8.1 PACKING SPECIFICATIONS
8.2 PACKING METHOD
9. DEFINITION OF LABLES
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
10.2 SAFETY PRECAUTIONS
11.MECHANICAL CHARACTERISTICS
Issued Date: Oct. 06, 2003
Model No.: V296W1 - L06
Approval
------------------------------------------------------- 3
------------------------------------------------------- 4
------------------------------------------------------- 5
------------------------------------------------------- 6
------------------------------------------------------- 10
------------------------------------------------------- 11
------------------------------------------------------- 15
------------------------------------------------------- 17
------------------------------------------------------- 21
------------------------------------------------------- 23
------------------------------------------------------- 24
------------------------------------------------------- 25
2
-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.1
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Oct. 06, 2003
Model No.: V296W1 - L06
Approval
Version Date
Ver 2.0
Ver 2.1
Jun.27,’03
Oct.06,’03
Page
(New)
All
17
20
REVISION HISTORY
Section Description
Approval Specification was first issued.
All
7.2
7.2
Min. Max.
G000 - Л 0.00 - Л 0.00
G032 - Л 0.00 - Л 3.01
G064 - Л 0.50 - Л 9.28
G096 - Л 6.31 - Л18.69
G128 - Л13.74 - Л29.66
G160 - Л27.12 - Л44.14
G192 - Л44.97 - Л60.75
G224 - Л68.90 - Л80.19
G255 - Л100 - Л100
Add Note (9)
3
-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.1
www.panelook.com
Global LCD Panel Exchange Center
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V296W1- L06 is a 30” TFT Liquid Crystal Display module with 16-CCFL Backlight unit and 1ch-LVDS
interface. This module supports 1280 x 768 WXGA format and can display true 16.7M colors ( 8-bit/color).
The inverter module for backlight is built-in.
1.2 FEATURES
- Ultra wide viewing angle – Super MVA technology
- High brightness ( 500 nits)
- High contrast ratio (500:1)
- Fast response time
www.panelook.com
Issued Date: Oct. 06, 2003
Model No.: V296W1 - L06
Approval
- High color saturation NTSC 75%
- WXGA (1280 x 768 pixels) resolution
- DE (Data Enable) only mode
- LVDS (Low Voltage Differential Signaling) interface
1.3 APPLICATION
- TFT LCD TVs
1.4 GENERAL SPECIFICATI0NS
Item Specification Unit Note
Active Area 643.2(H) x 385.92 (V) (29.53” diagonal) mm
Bezel Opening Area 648.8 (H) x 391.52 (V) mm
Driver Element a-si TFT active matrix - Pixel Number 1280 x R.G.B. x 768 pixel Pixel Pitch (Sub Pixel) 0.1675 (H) x 0.5025 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 16.7M color Display Operation Mode Transmissive mode / Normally black - -
Anti-glare with anti-reflective coating
Surface Treatment
Hard coating (2H), Haze : 40%
Reflection rate : < 2%
- -
(1)
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal(H) 683.6 mm
Module Size
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Note (2) Module Depth does not include connectors.
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO ’s representative while your product design is based on this specification.
Vertical(V) 433.6 mm
Depth(D) - 43 mm
Weight - 5500 g -
4
-
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
(1), (2)
Version 2.1
www.panelook.com
Global LCD Panel Exchange Center
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 +50 ºC (1), (2)
Shock (Non-Operating) S
Vibration (Non-Operating) V
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta М 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel display area surface should be 0 ºC Min. and 60 ºC Max.
www.panelook.com
Issued Date: Oct. 06, 2003
Model No.: V296W1 - L06
Approval
Value
Min. Max.
- 100 G (3), (5)
NOP
- 1.0 G (4), (5)
NOP
Unit Note
Note (3) 2 ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 500 Hz, 10 min, 1 time each X, Y, Z.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so
that the module would not be twisted or bent by the fixture.
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
Storage Range
5
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO ’s representative while your product design is based on this specification.
Temperature (ºC)
5
-
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
80 60 -20 40 0 20 -40
Version 2.1
www.panelook.com
Global LCD Panel Exchange Center
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage Vcc -0.3 +6.0 V
Logic Input Voltage VIN -0.3 4.3 V
2.2.2 BACKLIGHT UNIT
Item Symbol
Lamp Voltage VL - 2.5K V
Lamp Current IL - 6.5 mA
Lamp Frequency FL - 80 KHz
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
www.panelook.com
Value
Min. Max.
Value
Min. Max.
Unit Note
Unit Note
Issued Date: Oct. 06, 2003
Model No.: V296W1 - L06
(1)
(1), (2), IL = 6.0 mA
RMS
RMS
(1), (2)
Approval
should be restricted to the conditions described under Normal Operating Conditions.
Note (2) Specified values are for lamp (Refer to 3.2 for further information).
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE Ta = 25 ± 2 ºC
Parameter Symbol
Power Supply Voltage Vcc 4.5 5.0 5.5 V Ripple Voltage VRP - - 200 mV Rush Current I
White - 1.5 - A (3)a
Power Supply Current
LVDS differential input high threshold
voltage
LVDS differential input low threshold
voltage
LVDS common input voltage Vic 1.125 1.25 1.375 V
Terminating Resistor RT - 100 - ohm
Note (1) The module should be always operated within above ranges.
Note (2) Measurement Conditions:
Black - 0.8 - A (3)b
Vertical Stripe
- - 3.0 A (2)
RUSH
lcc
- - +100 mV
V
TH
-100 - - mV
V
TL
Min. Typ. Max.
- 1.2 - A (3)c
Value
Unit Note
6
-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.1
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Oct. 06, 2003
Model No.: V296W1 - L06
Approval
+5.0V
R1
47K
Q1 2SK1475
FUSE
C3
1uF
Vcc
(LCD Module Input)
(High to Low)
(Control Signal)
SW
+12V
C1
1uF
VR1
R2
1K
47K
0.01uF
Q2
2SK1470
C2
Vcc rising time is 470μs
+5V
0.9Vcc
0.1Vcc
GND
470μs
Note (3) The specified power supply current is under the conditions at Vcc = 5 V, Ta = 25 ± 2 ºC, f
whereas a power dissipation check pattern below is displayed.
a. White Pattern
b. Black Pattern
= 60 Hz,
v
Active Area
Active Area
7
-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.1
www.panelook.com
A
A
A
A
A
A A
A
A
A
A
A
A
A
A A
Global LCD Panel Exchange Center
c. Vertical Stripe Pattern
Active Area
www.panelook.com
R
G
R
B
G
R
B
G
R R
G
Issued Date: Oct. 06, 2003
Model No.: V296W1 - L06
Approval
R
G
R
R
G
G
G
B
B
B
B
R
R
B
B
B
B
3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC
Parameter Symbol
Lamp Input Voltage VL 1053 1170 1287 V
Lamp Current IL 4.2 4.5 4.8 mA
Lamp Turn On Voltage VS
Operating Frequency FL 57 62 67 KHz (3)
Lamp Life Time LBL 50K - - Hrs (5)
Power Consumption PL - 105 - W (4), IL = (4.5) mA
Note (1) Lamp current is measured by utilizing high frequency current meters as shown below:
LCD
Module
Min. Typ. Max.
1560 - 3000 V
1870 - 3000 V
HV (Pink)
HV (White)
HV (Pink)
HV (White)
HV (Pink)
HV (White)
HV (Pink)
HV (White)
HV (Pink)
HV (White)
HV (Pink)
HV (White)
HV (Pink)
HV (White)
HV (Pink)
HV (White)
Value
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
Inverter
LV (Gray)
Unit Note
IL = (4.5) mA
RMS
(1)
RMS
(2), Ta = 25 ºC
RMS
(2), Ta = 0 ºC
RMS
A
8
-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO ’s representative while your product design is based on this specification.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Version 2.1
www.panelook.com
Global LCD Panel Exchange Center
Note (2) The voltage shown above should be applied to the lamp for more than 1 second after startup.
Otherwise the lamp may not be turned on.
Note (3) The lamp frequency may produce interference with horizontal synchronous frequency from the
display, and this may cause line flow on the display. In order to avoid interference, the lamp
frequency should be detached from the horizontal synchronous frequency and its harmonics as far
as possible.
www.panelook.com
Issued Date: Oct. 06, 2003
Model No.: V296W1 - L06
Approval
Note (4) P
Note (5) The lifetime of a lamp is defined as the time in which it continues to operate under the condition Ta =
Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the
=(
Н
lamp1-lamp16 I
L
o
25 П2
(a) When the brightness becomes equal or less than 50% of its original value.
(b) When the effective discharge length becomes equal or lower than 80% of its original value.
inverter must have specifications for the modularized lamp. The performance of the Backlight, such
as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter for the
lamp. All the parameters of an inverter should be carefully designed to avoid producing too much
current leakage from high voltage output of the inverter. When designing or ordering the inverter
please make sure that a poor lighting caused by the mismatch of the Backlight and the inverter
(miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module should be
operated in the same manners when it is installed in your instrument.
C and IL = (4.2) ~ (4.8) mArms until one of the following events occurs:
(Effective discharge length is defined as an area that has equal or more than 70% brightness
compared to the brightness at the center point.)
ОVL)/0.8, PL is based on the inverter efficiency, which is 80%.
L
9
-
The information described in this technical specification is tentative and it is possible to be changed without prior notice.
Please contact CMO ’s representative while your product design is based on this specification.
Version 2.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...