CMA Dishmachines CMA-66H, 66 High User Manual

Model shown as Left to Right.
Also available as Right to Left.

CMA-66H

High Temperature

66" Conveyor

Dishwasher

FEATURES:

■ Auto re-fill system.

■ 205 racks / 820 covers per hour.

■ Economical to operate. Uses only .94 gallons

of water per cycle.

■ Four-stage washing process provides pre­wash, dual power wash and final rinse all in a
66" machine.

■ Automatic soil purging system filters wash
water and traps plate debris into an external
tray. Tray can be easily removed for dumping
contents.

■ Brass rocker arm bearing (extends longevity)
newly engineered.

■ All stainless steel construction offers durable
performance and years of trouble free
operation.

■ Upgraded high load power contactors.

■ Built-in chemical resistant industrial 10kW

heater is proven to be more durable than
commercial style heaters.

■ Large 19" high opening accommodates larger
items and utensils.

■ Auto start/stop makes operation safe and
easy.

■ Includes table limit switch and rack saver arm
that protect the machine, dishracks and table
from damage.

■ Two speed settings available for optimum
cleaning performance.

■ Auto Fill.

■ Built-in Poly ProTMscrap accumulator.

Rack saver clutch system
with brass rocker arm
bearing protects the
machine, dishracks and
table from damage.

Shown with optional cor­ner feed table. Available
right or left.

CMA Dishmachines 12700 Knott Str

Printed in the U.S.A. © 2008 CMA, Inc.

Four-stage wash­i n g process provides
pre-wash, dual power
wash and final rinse all
in a 66" machine.

Easy to remove wash
arms with captive end
caps. Never lose

another end cap again!

ove, CA 92841• 800-854-6417 • 714-898-8781 • Fax: [phone] • www.cmadishmachines.com

den Gr

eet Gar

reserves the right to modify specifications or discontinue models without prior notification.

CMA

Large 19" high opening
accommodates larger
items and utensils.

Single action control
switch with easy to read
temperature gauges and
complete operating
instructions.

62

1

/8"

45

"

Wall

5

TOP VIEW

O
V
4

16

"

Inside Clearance

Not To Exceed

1

1

/4"

R

IGHT SIDE

72

"

19

"*

Door Opening 20

3

/4"

54

"

55

"

Leg Adj

CMA-66H

16

"

Inside Clearance

Not To Exceed

1

1

/4"

High Temperature

66" Conveyor

Dishwasher

WARNING: Plumbing connections must be made by a qualified service company who will comply with all available Federal, State, and Local Health,
Plumbing and Safety codes.

TOP VIEW

16"

Electrical Hook Up
4-1/2" Off The Top

25"

ater Inlet 3"

W

Off The T

13"

op

5" Min. Wall Clearance

4"

25-1/8"

66"

83-1/8"

65"

Leg Adj

66"

Clearance For

Rocker Arm Is

7-1/4" From

33-3/4"
Leg Adj

35"

Conveyor

Tank

31"

9"

9-1/2"

75-1/2"

RIGHT TO LEFT

2" Drain

Optional Vent
Hoods 4"X16"

8" Splash
Shield
Each End

9"

6-1/2"
Leg Adj
7-1/2"

FRONT VIEW

24"

71-3/4"

Leg
Adj.

72-3/4"

55-1/2"

Leg
Adj.

56-1/2"

Opening
20-3/4"

RIGHT VIEW

Drain

Specifications:

MODEL CMA-66H USA METRIC

OPERATING CAPACITY

RACKS PER HOUR (NSF RATED) 205 205

CONVEYOR SPEED 5.7 FT./MIN. (174 CM/MIN.)
DRAIN 2" -
(3) WASH PUMP MOTORS HP 11
CONVEYOR MOTOR HP 1/3 1/3
WATER INLET - FILL 3/4" (1.9cm)

TER INLET - FINAL RINSE

WA
DRAIN SIZE 2"
FINAL RINSE PRESSURE 20 5psi (1.41 kg/cm2)

1/2" (1.27cm)

+

(5.1cm)

WASH TANK CAPACITY

PRE-WASH 5.25 GAL (20.0 L)

ASH

W

13.25 GAL

(50.0 L)

TOTAL 18.5 GAL (70 L)

WASH PUMP CAPACITY

EACH 52 GPM (197 LPM)

OPERATING TEMPERATURE

ASH 150°F-160°F (68°C-71°C)

W
FINAL RINSE

F-195°F (82°C-90.5°C)

°

180

WATER CONSUMPTION

PER RACK (FINAL RINSE) .94 GAL (3.6 L)
PER HOUR (FINAL RINSE)

192 GPH (726.8 LPH)

DIMENSIONS

DEPTH 25-1/8" (64cm)
WIDTH 66" (167.64cm)
HEIGHT 55-1/2"-56-1/2" (140.97-143.51cm)
STANDARD TABLE HEIGHT 34" (86cm)
MAX HEIGHT CLEARANCE
FOR DISHES 19" (48cm)

STANDARD DISHRACK 11
DIMENSIONS 19-3/4"X19-3/4" (50X50cm)

ELECTRICAL RATING VOLTS PHASE AMPS

208 1 71
240 1 78
208 3 40
240 3 44
480 3 19

ELECTRIC TANK HEATER 208V/10kW 240V/12.75kW
SPECIFY DIRECTION OF RACK TRAVEL (RIGHT TO LEFT OR LEFT TO RIGHT) WHEN

ORDERING
CMA-66H EXHAUST VENTILATION REQUIREMENTS AT 100% CAPACITY CFM

ENTRANCE END 200 MAX

DISCHARGE END 400 MAX

SHIPPING WEIGHT

APPROXIMATE 750# (340.2kg)

Summary Specifications: Model CMA-66H

ACT

OR

, UL, and CUL

Y

The Model CMA-66H high temperature conveyor dishwasher meets NSF

The CMA-66H performs four separate washing functions including a built-in pre-wash,

lizing 180
dual wash

F final rinse water

°

and final rinse all in a 66" space. The CMA-66H washes up to 205 racks per hour and uses a minimum .94 gallons

.

of water per rack while achieving sparkling, clean, dry dishes. Constructed entirely of stainless steel.

Available Models

■ CMA-66H R/L

Right to Left

■ CMA-66H L/R Left to Right

CMA Dishmachines 12700 Knott Street Garden Grove, CA 92841• 800-854-6417 • 714-898-8781 • Fax: [phone] • www.cmadishmachines.com

Printed in the U.S.A. © 2008 CMA, Inc.

Available Options

able Standard

■ Corner Feed

T

(F

INSTALLED ONLY)

■ Alternative electrical options

■ Also available at 167 racks/hr

■ Stainless steel dishtables

CMA reserves the right to modify specifications or discontinue models without prior notification.

sanitation and construction

■ Vent Hood with 4" X 16" Vent and Damper
Control (2 per set)

■ Motor Cover

■ Hatco C-24 Booster Heater (40

■ Hatco C-45 Booster Heater (70

USA METRIC

AL CFM 600 MAX

TOT

standards uti

°F Rise)

F Rise)

°

-