Clinton Electronics CE-CM-LX-17-B User Manual
Telescopic Pole Mount
CE-CM-S-2
CE-CM-SX-6
CE-CM-SX-8
CE-CM-LX-12
CE-CM-LX-17
User Manual
CLINTON Electronics
6701 Clinton Road
Loves Park, IL 61111
1.800.447.3306 Sales
1.800.549.6393 Support
1.800.633.8712 Fax
www.clintonelectronics.com
WARNING
M4 Lock Nut
1/4”-20 Lock Nut
1/4” Washer
M4 Washer
M4 Lock Nut
1/4”-20 Lock Nut
1/4” Washer
M4 Washer
AC24VIN
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
H&F
AC24V
AUX1
AUX2
COM
ALM1
ALM2
ALM3
ALM4
ALM5
ALM6
ALM7
485A +
485B -
485A +
485B -
AC24V
AC220V
AC220V
COM
JP2
JP2_2
AC24V FUSE
J1
FUSE
5X20
Alarm Inputs
485 Inputs
Ground
24V Input
Auxilary Inputs
Common
Common
220V Aux. Input
Alarm/Aux/Com
Output 1 to Camera
AC24V Output
to Camera
AC24V Aux. Input
5 x 20mm fuse
3A 250V
RS485 Communication
Output to Camera
Heater &
Fan Output
JP9
NOT USED WITH STANDARD SETUP
220V Aux. Input
Alarm/Aux/Com
Output 2 to Camera
IN
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
H&F
AC24V
AUX1
AUX2
COM
ALM1
ALM2
ALM3
ALM4
ALM5
ALM6
ALM7
485A
485B
485A
485B
AC24V
AC220V
AC220V
COM
JP2
JP2_2
AC24V FUSE
J1
FUSE
5X20
Outdoor Box
Model CE-PTZ-WP24
0204201792
2.12 in (54mm)
4.48 in (114mm)
JP9
AC24VIN
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
H&F
AC24V
AUX1
AUX2
COM
ALM1
ALM2
ALM3
ALM4
ALM5
ALM6
ALM7
AC220V
COM
JP2
JP2_2
AC24V FUSE
J1
FUSE
5X20
Alarm Inputs
Auxilary Inputs
Common
Common
220V Aux. Input
Alarm/Aux/Com
Output 1 to Camera
AC24V Output
to Camera
AC24V Aux. Input
5 x 20mm fuse
3A 250V
RS485 Communication
Output to Camera
Heater &
Fan Output
JP9
NOT USED WITH STANDARD SETUP
220V Aux. Input
Alarm/Aux/Com
Output 2 to Camera
JP9
Prior to installation and use of this product, please observe the following warnings:
1. Installation and servicing should be done by qualied personnel, and all work done should conform to local codes.
2. Using replacement parts or accessories other than from the manufacturer may void the warranty.
CAUTION
CHANGES OR MODIFICATIONS NOT EXPRESSLY
APPROVED BY THE PARTY RESPONSIBLE FOR
COMPLIANCE COULD VOID THE USERS AUTHORITY
TO OPERATE THE EQUIPMENT.
Telescopic LCD ceiling mount Info:
This bracket is designed to mount to mount an LCD from the ceiling structure. It can be
used with the existing truss structure of the building or in conjunction with channel strut.
There are four lengths of brackets available:
• Part # CM-S-2 Length of 22” to 35”
• Part # CM-SX-6 Length of 36” to 67”
• Part # CM-SX-8 Length of 54” to 96”
• Part # CM-LX-12 Length of 71” to 139”
• Part # CM-LX-17 Length of 75” to 200”
(Brackets are identical except for length)
Included Hardware:
1/2”-13 lock nut (1 pc.),
and fender washer (1 pc.)
Safety cable with crimped
eyelet. (1 pc.)
Please check to ensure all hardware is included prior to installation. If parts are missing, please contact Clinton Electronics for replacement parts.
1/4”-20 x 2” hex head bolt (1 pc.),
lock washer (1 pc.), washers (2 pcs.),
and locknut (1 pc.)
U-bolt cable
clamp. (1 pc.)
M4 x 45 screw (1 pc.),
washers (2 pcs.), and locknut (1 pc.)
M4 x 10mm screw
to attach safety cable
to rear of display. (1 pc.)
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this unit.
Tools Required:
7/16” wrench
7mm wrench
10mm wrench
3/4” wrench
5/16” wrench
#2 Phillips head screwdriver
level
M4 x 8 VESA screws
(4 pcs.)
Bracket (1 pc.)
User Manual
(1 pc.)
Pole Mount
Assembly (1 pc.)
Loading...