Climax
Gate Valve Grinding and Lapping Machines
Model Numbers:
VM1700, VM1900
Valve Seat Diameter Range: 8“-48“ (200 mm-1200 mm)
“On Site” grinding and lapping of
gate valves
Easy to set up & handle
Powerful
Rigid design
High performance
Feb-06 / VM1700-1900 Gate Valve Grinding & Lapping Machine Brochure Gate Valve Grinding & Lapping Machine Brochure
Page 1 of 7
Climax Portable Machine Tools
2712 E. Second St.
Newberg, OR 97132 USA
Telephone: 503-538-2185
North America Toll-Free: 800-333-8311
E-Mail: info@cpmt.c om
Internet:
www.cpmt.com
Technical Data
Working range-DN…
Submerging Depth
Power
Variable Spindle Speed
Spindle Torque
min
max VM1700
max VM1700
with extension
max VM1900
max VM1900
with extension
max (VM1700)
max (VM1900)
electric
pneumatic
electric
pneumatic
permanent
max
8’’
28’’
36”
40’’
48”
40”
55’’
1.3 HP
0.75 HP
20 … 370 rpm
20 … 270 rpm
28 ft-lb
117 ft-lb
200 mm
700 mm
900 mm
1000 mm
1200 mm
1000 mm
1400 mm
1 kW
0.55 kW
40 Nm
160 Nm
Weight
Machine VM1700
Basic machine without tooling
Shipping Weight
Machine VM1900
Basic machine without tooling
Shipping Weight
62 lb
330 lb
68 lb
507 lb
28 kg
160 kg
31 kg
230 kg
Feb-06 / VM1700-1900 Gate Valve Grinding & Lapping Machine Brochure Gate Valve Grinding & Lapping Machine Brochure
Page 2 of 7
Model VM1700
P/N
Gate Valve Grinder VM170 0S
470-00S-S12 VM1700S with electric motor 230 V / 50 Hz
470-00S-S13 VM1700S with pneumatic motor
470-00S-S14 VM1700S with electric motor 230V / 50 Hz and
470-00S-S15 VM1700S with electric motor 115 V / 60 Hz
(Range 8”-28” (200 mm-700 mm)Diameter)
Description
Nominal working dia 8“ to 28“ (200 mm to 700 mm)
Submerging depth 40“(1000 mm).
Included Components:
• 3 sets (5 arms/set) of planet arms 2.4” (60 mm), 4.5”
(115 mm), 6.3” (160 mm) in length.
• Set of 3 planet wheels 8.7” (220 mm), 15.0” (380 mm),
21.3” (540 mm) in diameter.
• 2 sets (5 discs/set) of grinding discs 2.0” (50 mm) &
3.2” (80 mm) in diameter.
• 1 set of clamping equipment for mounting the machine
on valves with and without top flange.
• Start up set of abrasives grain 100 and 500.
• 1 set (5) of CBN grinding disks 2.0”(50 mm) diameter
• 1 set of tooling.
• Carrying cases with foam inlet for the machine and the
accessories.
pneumatic motor
470-00S-S16 VM1700S with electric motor 115V / 60 Hz and pneu-
Gate Valve Grinding and Lapping machine VM1700
470-00S-S02 VM1700 with electric motor 230 V / 50 Hz
470-00S-S03 VM1700 with pneumatic motor
470-00S-S04 VM1700 with electric motor 230V / 50 Hz and pneumatic
470-00S-S05 VM1700 with electric motor 115 V / 60 Hz
470-00S-S06 VM1700 with electric motor 115V / 60 Hz and pneumatic
matic motor
Machine like VM1700S but with additional lapping
equipment:
• 2 sets (5 discs/set) of lapping disks 2.0”(50 mm) &
3.2”(80 mm) in diameter.
• Lapping paste 10 and 30 µm.
motor
motor
Pneumatically driven machines also require the accessory pneumatic motor maintenance kit
Feb-06 / VM1700-1900 Gate Valve Grinding & Lapping Machine Brochure Gate Valve Grinding & Lapping Machine Brochure
Page 3 of 7
Model VM1900
P/N
Gate Valve Grinder VM190 0S
470-00S-S32 VM1900S with electric motor 230 V / 50 Hz
470-00S-S33 VM1900S with pneumatic motor
470-00S-S34 VM1900S with electric motor 230V / 50 Hz and
470-00S-S35 VM1900S with electric motor 115 V / 60 Hz
(Range 8”-40” (200 mm-1000 mm)Diameter)
Description
Nominal working diameter 8“ to 28“ (200 mm to 1000 mm)
Submerging depth 55“(1400 mm).
Included Components:
• 3 sets (7 arms/set) of planet arms 2.4” (60 mm), 4.5”
(115 mm), 6.3” (160 mm) in length.
• Set of 4 planet wheels 8.7” (220 mm), 15.0” (380 mm),
21.3” (540 mm), 32.3”(820 mm) in diameter.
• 2 sets (7 discs/set) of grinding discs 2.0” (50 mm) &
3.2” (80 mm) in diameter.
• 1 set of clamping equipment for mounting the machine
on valves with and without top flange .
• Start up set of abrasives grain 100 and 500.
• 1 set (7) of CBN grinding disks 2.0”(50 mm) diameter
• 1 set of tooling.
• Carrying cases with foam inlet for the machine and the
accessories.
pneumatic motor
470-00S-S36 VM1900S with electric motor 115V / 60 Hz and pneu-
Gate Valve Grinding and Lapping machine VM1900
470-00S-S22 VM1900 with electric motor 230 V / 50 Hz
470-00S-S23 VM1900 with pneumatic motor
470-00S-S24 VM1900 with electric motor 230V / 50 Hz and pneumatic
470-00S-S25 VM1900 with electric motor 115 V / 60 Hz
470-00S-S26 VM1900 with electric motor 115V / 60 Hz and pneumatic
matic motor
Machine like VM1900S but with additional lapping
equipment:
• 2 sets (7 discs/set) of lapping disks 2.0”(50 mm) &
3.2”(80 mm) in diameter.
• Lapping paste 10 and 30 µm.
motor
motor
Feb-06 / VM1700-1900 Gate Valve Grinding & Lapping Machine Brochure Gate Valve Grinding & Lapping Machine Brochure
Page 4 of 7
Pneumatically driven machines also require the accessory pneumatic motor maintenance kit
Accessories
P/N
Description
240-13K-001 Maintenance unit for pneumatic motor
Required for machines with pneumatic motor.
The maintenance unit is not included in the standard scope
of supply with pneumatic driven machines.
Includes:
• filter
• oiler
• pressure gauge
• speed controller
470-00S-L03 Swing Check accessories
For grinding of swing check valves.
Includes:
• swivel adapter for adaption of the machine on the va lve
• spindle extension for reaching the seat with the p lanet
wheels.
120-22S-N01 Planet arm 10.8” (275 mm) long (each)
(A total of 5 are required for VM1700)
(A total of 7 are required for VM1900)
To extend the working diameter of the:
• VM1700 from 28’’ to 36’’(700 mm to 900 mm)
• VM1900 from 40’’ to 48’’(1000 mm to 1200 mm)
110-33S-N01 CBN grinding disks 2” (50 mm) diameter. (each)
(A total of 5 are required for VM1700)
(A total of 7 are required for VM1900)
Required for rough grinding of heavily damaged seats
(1 set is included in each component package).
110-34S-N01 CBN grinding disks 3.2” (80 mm) diameter. (each)
(A total of 5 are required for VM1700)
(A total of 7 are required for VM1900)
Required for rough grinding of heavily damaged seats.
.
110-41S-N01 Lapping disks 1.2” (30 mm) diameter (each)
(A total of 5 are required for VM1700)
(A total of 7 are required for VM1900
110-42S-N01 Lapping disks 2” (50 mm) diameter (each)
(A total of 5 are required for VM1700)
(A total of 7 are required for VM1900
110-43S-N01 Lapping disks 3.2” (80 mm) diameter (each)
(A total of 5 are required for VM1700)
(A total of 7 are required for VM1900
Feb-06 / VM1700-1900 Gate Valve Grinding & Lapping Machine Brochure Gate Valve Grinding & Lapping Machine Brochure
Page 5 of 7
Accessories
P/N
270-00S-L12 Globe Valve Conversion with electric motor 230 V / 50 Hz
270-00S-L13 Globe Valve Conversion with pneumatic motor
270-00S-L15 Globe Valve Conversion with electric motor 115 V / 60 Hz
Description
Globe Valve Conversion Kit
The conversion kit comes with a complete machine arm (submerging depth 40’’ (1000 mm)) and mounting equipment. It
uses the motor and the tooling of th e VM17 00 / 1 9 00.
Scope of supply:
• One pieces of ball joint coupling size 15 and 25 each.
• Integrated grinding pressure detection with a scale.
• Mounting column with mounting plate for valves with and
without flange.
• Carrying case with foam inlet for the accessories. The
machine arm is included in the case of the VM1700
Feb-06 / VM1700-1900 Gate Valve Grinding & Lapping Machine Brochure Gate Valve Grinding & Lapping Machine Brochure
Page 6 of 7
TWIN Machines for Gate and Globe Valves
Range: 8”-48”(200-1200 mm) Diameter
P/N
470-00S-T12 VM1700ST with electric motor 230 V / 50 Hz
470-00S-T13 VM1700ST with pneumatic motor
Description
Gate Valve Grinder VM170 0S T
• Includes The VM1700S and the Globe valve conversion
470-00S-T14 VM1700ST with electric motor 230 V / 50 Hz
470-00S-T15 VM1700ST with electric motor 115 V / 60 Hz
470-00S-T16 VM1700ST with electric motor 115 V / 60 Hz
470-00S-T02 VM1700T with electric motor 230 V / 50 Hz
470-00S-T03 VM1700T with pneumatic motor
470-00S-T04 VM1700T with electric motor 230 V / 50 Hz
470-00S-T05 VM1700T with electric motor 115 V / 60 Hz
470-00S-T06 VM1700T with electric motor 115 V / 60 Hz
470-00S-T32 VM1900ST with electric motor 230 V / 50 Hz
470-00S-T33 VM1900ST with pneumatic motor
and pneumatic motor
and pneumatic motor
Gate Valve Grinding an Lapping machine VM1700T
• Includes The VM1700 and the Globe valve conversion
and pneumatic motor
and pneumatic motor
Gate Valve Grinder VM190 0S T
• Includes The VM1900S and the Globe valve conversion
470-00S-T34 VM1900ST with electric motor 230 V / 50 Hz
470-00S-T35 VM1900ST with electric motor 115 V / 60 Hz
470-00S-T36 VM1900ST with electric motor 115 V / 60 Hz
470-00S-T22 VM1900T with electric motor 230 V / 50 Hz
470-00S-T23 VM1900T with pneumatic motor
470-00S-T24 VM1900T with electric motor 230 V / 50 Hz
470-00S-T25 VM1900T with electric motor 115 V / 60 Hz
470-00S-T26 VM1900T with electric motor 115 V / 60 Hz
Because CLIMAX is committed to product improvement, the machine you receive may be slightly different to the pictures above.
Feb-06 / VM1700-1900 Gate Valve Grinding & Lapping Machine Brochure Gate Valve Grinding & Lapping Machine Brochure
Page 7 of 7
and pneumatic motor
and pneumatic motor
Gate Valve Grinding an Lapping machine VM1900T
• Includes The VM1900 and the Globe valve conversion
and pneumatic motor
and pneumatic motor
Loading...