Climax PL4000 User Manual

PL4000 PORTABLE LATHE
Re-turn worn shafts and roll journals on-site in hours.
The PL4000 Portable Lathe bolts directly to the end of the work piece and enables the oprator to cut grooves, or re-turn straight and tapered shafts with precision.
Requires only 12.75 inches (323.8
mm) of radial turning clearance so you can work in tight spots.
09
2008 PL4
Powerful and Precise.
Performs all turning operations along 24.75 inches (628.7 mm) of shaft. Cuts tapers up to 2.5 inches per foot (63.5 mm per 304.8 mm) on diameter.
Turns shafts from 8.0 - 24.0 inches (203.2 - 609.6 mm). (This machine works within a 12.0 inch (304.8 mm) diameter space around the shaft, and 24.0 inches (609.6 mm) from the end of the shaft, or 27.0 inches (685.8 mm) with optional extender.)
Crank handle
Pneumatic
gear box
Lockout
valve
Bar anchor
Turning bar
Needle valve
Rotary Union
Main body
Tool head
Spindle base
Pneumatic motor
Counterweight
SPECIFICATIONS
US Metric
Shaft diameter Min. 8.0 inches 203.2 mm Max. with standard tool holder 18.0 inches 457.2 mm Max. with optional extender 24.0 inches 609.6 mm
Cutting reach Min. with standard tool holder 0 inches 0 mm Max. with standard tool holder 24.75 inches 628.7 mm Min. with optional extender 3.25 inches 82.6 mm Max. with optional extender 27.0 inches 685.8 mm
Max taper 2.5 inches/foot on diameter 63.5 mm/304.8 mm on diameter (on 8 - 18 inch diameters) (on 203.2 - 457.2 mm diameters)
Vertical tool travel, total 1.5 inches 38.1 mm
Tool feed, reversible 0 - 0.020 inches/rev 0 - 0.5 mm/rev.
Max. torque at tool head 450 ft-lb 610.1 N·m
Air motor Rotational speed at max. rated Hp 520 rpm 520 rpm Rotational speed at no-load 1100 rpm 1100 rpm
3
Air consumption at max. rated Hp 90 psi at 48 ft
/min 620 kPa at 136 cm3/min
Machine rotational speed at max. rated Hp 21 rpm 21 rpm at no-load 30 rpm 30 rpm
Cutter, square lathe tool bit
Operating weight 413 lbs 187.3 kg
Shipping weight 550 lbs 249.5 kg
Shipping dimensions 53 X 38 X 19 inches 1346.2 x 965.2 x 482.6 mm
1
/2 inch 12.7 mm
SET-UP
The Portable Lathe mounts to the shaft via a mounting plate which is drilled and coun­terbored to match the shaft. The lathe spin­dle then mounts to the plate on four studs. The turning bar mounts to arms on the main body and can be easily adjusted for reach and turning radius.
Parallelism between the bar and the spindle is set by adjusting two tool arm anchors until they measure equidistant from measuring flats on the main body. Parallelism with the work piece is set using jacking screws. Set screws provide centering.
Typical set-up time is 30 minutes (once the mounting plate is prepared).
A simple cam and valve arrangement activates the pneumatic tool feed mechanism.
The turning bar may be set at an angle for cutting tapers up to 2.5 inches/foot (63.5 mm/304.8 mm) on diameter.
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
page 2
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
OPERATIONAL DIMENSIONS
Dimensions in Inch (mm)
COMPONENTS AND ACCESSORIES
No. Description
12965 PL4000 Portable Lathe, Standard Machine, CE-Compliants
Standard portable lathe, complete and ready to operate. Machines shafts
8.0 - 18.0 inches (203.2 - 457.2 mm) in diameter. Tool reach is 0 to 24.75 inches (0 to 628.7 mm). Automatic pneumatic tool feed is reversible, variable from 0 - 0.020 inches/rev. (0 - 0.508 mm/rev.). Machine includes: main body assembly with blank mounting plate, standard turning bar and counterweight, 1.55 Hp (1.16 kW) air motor, pneumatic feed box, tool head, one indicator, abrasive belt holder, wrench set, and instructions.
17877 PL4000 Portable Lathe, Large Capacity Machine, CE-Compliant
Machines shafts 8.0 - 24.0 inches (203.2 - 609.6 mm) in diameter. Tool reach is 3.25 - 27.0 inches (82.6 - 685.8 mm). Automatic pneumatic tool feed is reversible, variable from 0 - 0.0020 inches/rev. (0 - 0.508 mm/rev.). Machine includes: main body assembly with blank mounting plate, standard turning bar and counterweight, tool head and turning bar extensions,
1.55 Hp (1.16 kW) air motor, pneumatic feed box, tool head, one abrasive belt holder, wrench set, and instructions.
15306 Tool head and bar extension kit
1
/2 inch (12.7 mm) square HSS lathe tool, hand crank, dial indicator,
1
/2 inch (12.7 mm) square HSS lathe tool, hand crank, dial
NOTE: Drawings are for reference only, are not to scale, and
page 3
may not represent actual product.
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
Tool head extension kit enables the standard tool head to machine shafts up to 24.0 inches (609.6 mm) in diameter. Includes extension, tool head stablizer plate, and mounting hardware. Turning bar extension increases standard tool reach to 27.0 inches (685.8 mm). Includes bar extension, counterweight addition, and mounting hardware. This kit included with the large capacity portable lathe (17877).
CLIMAX GLOBAL LEARNING CENTER
Climax has been teaching the fundamentals and fine points of portable machine tool operation for practically as long as we’ve been inventing and building the tools.
At the Global Learning Center situated in our corporate headquarters near Portland, Oregon, we provide training for machine tool operators on portable machine tool safety and machine setup and operation. Trainees also receive technical tips and tools to improve operational efficiencies, with the vast majority of every program devoted to hands-on activities and skill development.
The Climax instructional team includes specialists in shipbuilding, power generation, civil engineering, bridge re-building, petrochemical and other industries.
Whether it’s a regularly scheduled course at the Global Learning Center, or custom curriculum conducted at your facility, your machinists will benefit from courses developed by some of the most respected authorities in the business.
Call us today to register for a regularly scheduled class, or talk to us about how we can customize a training program for your specialized application.
Call Climax for:
On-site Training
Need some refresher courses in setting up and operating your Climax machine tool?
Special Projects
Climax has been solving complicated on-site machining and welding problems for our customers since
1964.
Rentals
With eleven worldwide rental depot locations, you are never far away from a Climax portable machine tool.
Climax Global Locations
Edmonton
World Headquarters
Portland
Houston
Monterrey
World Headquarters
2712 E. Second Street Newberg, Oregon 97132 USA Worldwide Telephone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 Email: info@cpmt.com
Cincinnati
European Headquarters
Manchester
Baton Rouge
Manchester
Cologne
Charlotte
Production Facilities
Rental Locations
International Distributors
Regional Sales & Technical Support Offices
Gdansk
Singapore
Connect with us:
European Headquarters
Am Langen Graben 8 52353 Düren, Germany Telephone:(+49) (0) 2421.9177.0 Fax: (+49) (0) 2421.9177.29 Email: info@cpmt.de
Perth
Copyright © 2012 Climax Portable Machining & Welding Systems. All Rights Reserved. Climax has taken reasonable measures to ensure the accuracy of the information contained in this document. However, Climax makes no warranties or representations with respect to the information contained herein; and Climax shall not be held liable for damages resulting from any errors or omissions herein, or from the use of the information contained in this document.
Loading...