LM6200 Z-AXIS SLIDE ATTACHMENT
Z-axis slide for the LM6200 Linear/Gantry Mill
makes quick work of side milling applications.
Many milling applications require the milling head to be positioned
parallel to the ram. An example is when milling an adjacent wall.
The Z-axis slide attachment for the LM6200 Linear/Gantry Mill
bolts between the ram and the milling head and provides 7 inches
(178 mm) of travel in the z-axis. It can be mounted on the ram in 3
different positions – lower, middle, and upper. The milling head can
be attached to the Z-axis slide at 0 deg, 90, 180, or 270°.
A hand wheel or electric power feed can be used to turn the
ballscrew which advances the slide back and forth, allowing precise
positioning or travel during side machining operations, or additional
travel for drilling.
Features
• With the addition of this accessory, milling area is increased
2.5 times to a total machining area of 24.2 x 176 inches
(614.7 x 4470.4 mm) when using a 10 inch (254 mm) face mill
and upper & lower mounting positions.
• 7 inches (177.8 mm) of travel provides ample stroke.
• Drilling, even with longer bits, is now quick & easy with the longer
stroke available with this accessory.
• Z-axis feed can be manual or power fed.
• Travel across the bed without removing the Z-axis Slide in the
middle and upper positions.
• Total center to center spindle distance of 14.2 inches (360.7 mm)
10
2013
LM62Z
Specications
Weight: 120 lbs (54.4 kg)
Slide Positions
Lower Position Middle Position Upper Position
(slide is inverted)
Applications
• milling walls
• below the bed surface milling
• drilling and tapping walls
• drilling and tapping below the bed
• drilling and tapping with longer tooling
• weld preparation
• precision wall profiles
• dragline bucket mounting support milling
• ring mill repair
and many more!
CLIMAX GLOBAL LOCATIONS
Edmonton
World Headquarters
Portland
Houston
Monterrey
Cincinnati
European Headquarters
Manchester
Charlotte
Baton Rouge
Manchester
Cologne
Production Facilities
Rental Locations
International Distributors
Regional Sales & Technical Support Offices
Gdansk
Singapore
Perth
Call Climax for:
On-site Training
Need some refresher courses in setting up
and operating your Climax machine tool?
Special Projects
Climax has been solving complicated
on-site machining and welding problems for
our customers since 1964.
Rentals
World Headquarters
2712 E. Second Street
Newberg, Oregon 97132 USA
Worldwide Telephone: 1.503.538.2185
N. America Toll-Free: 1.800.333.8311
Fax: 1.503.538.7600
Email: info@cpmt.com
With 16 worldwide rental depot locations,
you are never far away from a Climax
portable machine tool.
Connect with us:
European Headquarters
Am Langen Graben 8
52353 Düren, Germany
Telephone:(+49) (0) 2421.9177.0
Fax: (+49) (0) 2421.9177.29
Email: info@cpmt.de
Copyright © 2013 Climax Portable Machining & Welding Systems. All Rights
Reserved. Climax has taken reasonable measures to ensure the accuracy of
the information contained in this document. However, Climax makes no
warranties or representations with respect to the information contained herein;
and Climax shall not be held liable for damages resulting from any errors or
omissions herein, or from the use of the information contained in this document.
Loading...