FF8200 Flange Facer
Rugged Machine Design
• Large, heavy duty construction-grade
bearings provide powerful, rigid
performance throughout the entire
machine facing range, even machining
over bolt hole patterns.
• Oversized ring gear accommodates
extremely high torque levels for
challenging flange repair applications,
and these machines are able to generate
a phonographic finish.
Flexible and Versatile
• Both radial and axial feed is achieved
with a pneumatic feedbox. Manual
feeding for rapid positioning is also
possible.
• Feed rate is adjusted remotely at the
pneumatic conditioning unit, providing the
ultimate in operator safety and the flexibility
for feed rate adjustments even during
machining operations.
• Infinitely variable feed rates from
0.002 - 0.035 inches (0.0508 - 0.889 mm)/
rev provides operational flexibility.
• Reversible feed box can be mounted to
provide either radial or axial feed.
• Turning and counterweight arms can both
be adjusted for the desired swing
clearance and machining range.
• Tool head can be rotated a full 360˚
providing the ability to create a variety of
chamfers, O-Ring grooves, lens rings and
other angular surfaces as needed.
• Pneumatic & hydraulic drive options
available.
• Chucking system can be removed to
allow the flange facer to be facemounted.
• Can be mounted both OD and ID
• Milling option available with precision
downfeed ball screw
• Grinding option available for fine finish
work.
Quick and Easy Setup
• Modular design allows many of the
machine components to be removed to
facilitate easier setup and storage.
• Unique chucking system minimizes parts
to greatly simplify machine setup and tear
down.
• Quick-adjust leveling feet make setup
quick and easy.
10
2013
FF82
SpeciFicationS
US Metric
Machine Performance Ranges
ID: Mounting range 45 - 120 inches 1143.0 - 3048.0 mm
Facing diameter range 45 - 120 inches 1143.0 - 3048.0 mm
Milling diameter range 45 - 120 inches 1143.0 - 3048.0 mm
Grinding diameter range 45 - 120 inches 1143.0 - 3048.0 mm
Swing diameter @ minimum 84.7 inches 2151.4 mm
with feedbox on end of arm
Radial tool slide travel 12 inches 304.8 mm
Axial tool head travel 4 inches 101.6 mm
Depth required inside bore for ID chuck 12.13 ± 0.25 inches 308.1 ± 6.4 mm
(± 0.25 inches (± 6.4 mm) is travel of leveling foot)
Feed Rate 0.002 - 0.040 in/rev 0.051 - 1.016 mm/rev
OD: Mounting range * 89.8 - 136.4 inches 2280.9 - 3464.6 mm
Facing diameter range 45 - 120 inches 1143.0 - 3048.0 mm
Milling diameter range 45 - 113.5 inches 1143.0 - 2882.9 mm
Grinding diameter range (w/ feed box) 45 - 118 inches 1143.0 - 2997.2 mm
Grinding diameter range (w/o feed box) 45 - 120 inches 1143.0 - 3048.0 mm
Refer to ID for specications not listed
Milling Option:
Vertical Stroke, milling head 8 inches 203.2 mm
Rotational Drive System
Drive type Pneumatic or hydraulic drive with
pinion and internal ring gear
Pinion gear to ring gear reduction 7.429:1
Single point turning speed range:
Pneumatic 5 - 29 RPM
Hydraulic (based on motor choice) 1.8 - 18 RPM
Milling & grinding speed ranges (with reducer):
Pneumatic 0.004 - 0.173 RPM
(rapid only, not in cut) (58 ipm @ 72 inch dia.) (1473.2 mm/min @ 1828.8 mm dia.)
Hydraulic (based on motor choice) 0.002 - 0.374 RPM
Power input requirements
Pneumatic - 3.5 Hp (2.6 kW) 50 ft³/min @ 90 psi 1.42 m³/min @ 620 kPa
Hydraulic 10 gpm@1200 psi 37.9 L/min @ 8273 kPa
Measures
For machine dimensions, please refer to dimensional drawings
ID machine weight, approximate 4000 lb 1814.4 kg
ID machine weight with mill, approximate 4150 lbs 1882.4 kg
OD machine weight, approximate 3775 lb 1712.3 kg
ID machine weight with mill, approximate 3925 lbs 1780.4 kg
Chuck crate dimensions, (for ID and OD machines) (WxDxH)
Wood, approx. 93 x 40.5 x 40 in 2362 x 1029 x 1016 mm
Metal, approx. 90.2 x 40.2 x 36.2 in 2291 x 1021 x 920 mm
Leg crate dimensions (for ID and OD machines) (WxDxH)
Wood, approx. 94 x 43.5 x 19 in 2388 x 1105 x 483 mm
Metal, approx. 94.2 x 42.7 x 19.2 in 2393 x 1085 x 488 mm
OD mount hardware crate dimensions (for OD machine only) (WxDxH)
Wood, approx. 94 x 43.5 x 19 in 2388 x 1105 x 483 mm
Metal, approx. 94.2 x 42.7 x 19.2 in 2393 x 1085 x 488 mm
Testing Data
Flatness at 82 inch (2083 mm) diameter: .0068 inches (0.17 mm)
On a dedicated xture made of A-36 steel in a controlled environment with single point machine, after warm-up.
* OD mount minimum arm swing is 84.7 inches (2151.4 mm) diameter. An additional customer supplied structure will be required to chuck below the minimum swing
diameter with the feedbox attached..
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
page 2
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
tool conFigurationS
The FF8200 can be congured in several ways to meet your specic machining needs.
Select OPTION 1 for single pointing only
Select OPTION 2 for milling only
Select OPTION 3 for BOTH milling and single pointing
OPTION 1: To congure your FF8200 for Single Pointing Only
To congure your machine, please follow these steps.
1 Select a Base Package
2 Select a Feed Assembly
3 Select a Drive Motor Assembly
4 Select a Hydraulic Motor
5 Select an Optional Grinder Attachment
6 Select a Hydraulic Power Unit
7 Select a Turning Arm Assembly
8 Select a Counterweight Assembly
9 Select a Chuck Assembly
10 Select a Shipping Container
1 Base Package
Rotary table, tool kit, operator's manual . 58187
2 Feed Assembly
Pneumatic Feed Assembly with Remote Air Control 58671
3 Drive Motor Assembly
Pneumatic Motor and Drive Assembly 58186
(Pneumatic drive system includes: Pneumatic
motor w/ttings and mount, rotary union,
hoses, feed trip valve, cam, and pneumatic
conditioning unit with low pressure drop out.)
Hydraulic Drive Assy w/ Feed Conditioning Unit 58180
- DOES NOT INCLUDE MOTOR
(Hydraulic drive system includes: Hyd motor
mount, hoses, ttings, rotary union, feed trip
valve, cam, and feed pneumatic conditioning unit.)
4 Hydraulic Motor for Rotary Table Drive
(If Hydraulic drive is selected in step 3)
Rated at 10 gpm, 1200 PSI
Hydraulic Motor, 14.9 cu in (244.2 cu cm), 69216
3.6 - 18 RPM
Hydraulic Motor, 18.7 cu in (306.4 cu cm), 69217
2.8 - 14 RPM
Hydraulic Motor, 24.0 cu in (393.3 cu cm), 69218
2.2 - 11 RPM
Hydraulic Motor, 29.8 cu in (488.3 cu cm), 69219
1.8 - 9 RPM
* Multiple units may be ordered.
5 Optional Grinder Attachment
Grinding Attachment for Pneumatic Table Drive Motor 62537
Grinding Attachment for Hydraulic Table Drive Motor 62570
Grinder Rotational Gearbox
Slow Rotation Gearbox for Pneumatic Motor 62568
(gear ratio 160:1)
Slow Rotation Gearbox for Hydraulic Motor 62538
(gear ratio 160:1)
Grinder Tooling
Grinding Wheel 1.5 in (38.1 mm), CBN 130 Grit 62633
Grinding Wheel 2.25 in (57.2 mm), CBN 130 Grit 62634
6 Hydraulic Power Unit
For Hydraulic Drive Machine
Single Pump (single pointing only):
HPU 230V, 10 HP (7.5 kW) Single pump 63264
HPU 380V, 10 HP (7.5 kW) Single pump 63265
HPU 415V, 10 HP (7.5 kW) Single pump 63266
HPU 460V, 10 HP (7.5 kW) Single pump 63267
HPU 575V, 10 HP (7.5 kW) Single pump 63268
Single Pump with Air (for use with grinder):
HPU 230V, 10 HP (7.5 kW) Single pump with Air 62759
HPU 380V, 10 HP (7.5 kW) Single pump with Air 62760
HPU 415V, 10 HP (7.5 kW) Single pump with Air 62761
HPU 460V, 10 HP (7.5 kW) Single pump with Air 62762
HPU 575V, 10 HP (7.5 kW) Single pump with Air 62763
Pendant Cable and Hose
0.5 in (12.7 mm) Hose and Pendant Cable Assy, 62799
20 ft (6.1 m)
0.5 in (12.7 mm) Hose and Pendant Cable Assy, 62800
30 ft (9.1 m)
0.5 in (12.7 mm) Hose and Pendant Cable Assy, 62801
50 ft (15.2 m)
0.5 in (12.7 mm) Hose and Pendant Cable Assy, 62802
100 ft (30.5 m)
7 Turning Arm Assembly
Turning Arm Assembly with Single Point Tool Head 57872
Milling Arm Assembly with Single Point Tool Head 62578
8 Counterweight Assembly
Counterweight Assembly 58066
Counterweight Milling Arm Assembly 62515
9 Chuck Assembly
ID Chuck Assembly 57881
OD Chuck Assembly 61372
ID/OD Chuck Assembly 61454
10 Shipping Container
Wooden Crate for ID Mount Machine 58421
Metal Container for ID Mount Machine 59936
Wooden Crate Set for ID/OD Mount Machine 62679
Metal Container Set for ID/OD Mount Machine 61724
page 3
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
Tool ConfiguraTions
OPTION 2: To congure your FF8200 for Milling Only
To congure your machine, please follow these steps.
1 Select a Base Package
2 Select a Drive Motor Assembly
3 Select a Hydraulic Motor
4 Select an Optional Grinder Attachment
5 Select a Hydraulic Power Unit
6 Select a Turning Arm Assembly
7 Select a Counterweight Assembly
8 Select a Milling Head
9 Select a Hydraulic Motor
10 Select Tooling
11 Select a Chuck Assembly
12 Select a Shipping Container
1 Base Package
Rotary table, tool kit, drag brake assemblies,. 62673
operator's manual.
2 Drive Motor Assembly
Pneumatic Motor and Drive Assembly 62571
(Pneumatic drive system includes: Pneumatic
motor w/ttings and mount, gearbox, rotary
union, hoses, feed trip valve, and pneumatic
conditioning unit with low pressure drop out.)
Hydraulic Drive Assy w/Gearbox - DOES NOT 62585
INCLUDE MOTOR OR PNEUMATIC SYSTEM
(Hydraulic drive system includes: Hyd motor
mount, gearbox, hoses, ttings, and rotary union.)
3 Hydraulic Motor for Rotary Table Drive
(If Hydraulic drive is selected in step 2)
Rated at 10 gpm, 1200 PSI
Hydraulic Motor, 4.9 cu in (80.3 cu cm), 69213
0.1 - 0.35 RPM
Hydraulic Motor, 8.0 cu in (131.1 cu cm), 69214
0.05 - 0.20 RPM
Hydraulic Motor, 14.9 cu in (244.2 cu cm), 69216
0.02 - 0.11 RPM
Hydraulic Motor, 29.8 cu in (488.3 cu cm), 69219
0.012 - 0.06 RPM
* Multiple units may be ordered.
4 Optional Grinder Attachment
Grinding Attachment for Pneumatic Table Drive Motor 62948
(tool head included)
Grinding Attachment for Hydraulic Table Drive Motor 62947
(tool head included)
Grinder Tooling
Grinding Wheel 1.5 in (38.1 mm), CBN 130 Grit 62633
Grinding Wheel 2.25 in (57.2 mm), CBN 130 Grit 62634
5 Hydraulic Power Unit
Single Pump (for pneumatic table rotation):
HPU 230V, 25HP Single pump with Air 62774
HPU 380V, 25HP Single pump with Air 62775
HPU 415V, 25HP Single pump with Air 62776
HPU 460V, 25HP Single pump with Air 62777
HPU 575V, 25HP Single pump with Air 62778
Dual Pump (with air) for hydraulic
table rotation and hydraulic milling head,
and air for grinding attachment:
HPU 230V, 25HP Dual Pump with Air 62779
HPU 380V, 25HP Dual Pump with Air 62780
HPU 415V, 25HP Dual Pump with Air 62781
HPU 460V, 25HP Dual Pump with Air 62782
HPU 575V, 25HP Dual Pump with Air 62783
Dual Pump (for hydraulic table rotation and
page 4
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
hydraulic milling head)
HPU 230V, 25HP Dual Pump 62784
HPU 380V, 25HP Dual Pump 62785
HPU 415V, 25HP Dual Pump 62786
HPU 460V, 25HP Dual Pump 62787
HPU 575V, 25HP Dual Pump 62788
Pendant Cable & Hose, Single Pump
0.75 in (19.1 mm) Hose and Pendant Cable Assy, 62803
20 ft (6.1 m)
0.75 in (19.1 mm) Hose and Pendant Cable Assy, 62804
30 ft (9.1 m)
0.75 in (19.1 mm) Hose and Pendant Cable Assy, 62805
50 ft (15.2 m)
0.75 in (19.1 mm) Hose and Pendant Cable Assy 62806
100 ft (30.75 m)
Pendant Cable & Hose, Dual Pump
0.5 in (12.7 mm) & 0.75 in (19.1 mm) Dual Hose 62807
& Pendant Cable Assy, 20 ft (6.1 m)
0.5 in (12.7 mm) & 0.75 in (19.1 mm) Dual Hose 62808
& Pendant Cable Assy, 30 ft (9.1 m)
0.5 in (12.7 mm) & 0.75 in (19.1 mm) Dual Hose 62809
& Pendant Cable Assy, 50 ft (15.2 m)
0.5 in (12.7 mm) & 0.75 in (19.1 mm) Dual Hose 62810
& Pendant Cable Assy,100 ft (30.5 m)
6 Turning Arm Assembly
Milling Arm Assembly (does not include tool head) 72698
7 Counterweight Assembly
Counterweight Milling Arm Assembly 62415
8 Milling Head
Milling Head Assembly Inch #50 Taper NMTB 62282
Milling Head Assembly Inch #50 Taper CATV 62734
Milling Head Assembly Metric #50 Taper NMTB 62644
Milling Head Assembly Metric #50 Taper CATV 62735
9 Tooling (for inch milling head assembly only)
#50, NBTB 4 in (101.6 mm) Face Mill w/ Inserts 47383
#50, NBTB 5 in (127.0 mm) Face Mill w/ Inserts 47384
#50, NBTB 6 in (152.4 mm) Face Mill w/ Inserts 47385
#50, NBTB 8 in (203.2 mm) Face Mill w/ Inserts 47386
#50, NBTB 10 in (254.0 mm) Face Mill w/ Inserts 56175
Carbide Inserts 47229
10 Milling Head Swivel Assembly
Milling Head Swivel Plate Assembly 63250
11 Hydraulic Motor for Milling Head
Hydraulic Motor Assembly 8.0 cu in (131.1 cu cm) 53459
Hydraulic Motor Assembly 9.6 cu in (157.3 cu cm) 53458
Hydraulic Motor Assembly 11.9 cu in (195.0 cu cm) 46950
Hydraulic Motor Assembly 14.9 cu in (244.2 cu cm) 46375
Hydraulic Motor Assembly 18.7 cu in (306.4 cu cm) 46549
Hydraulic Motor Assembly 24.0 cu in (393.3 cu cm) 46550
12 Chuck Assembly
ID Chuck Assembly 57881
OD Chuck Assembly for Turning with Milling Arm 62666
ID/OD Chuck Assembly for Turning with Milling Arm 62674
13 Shipping Container
Wooden Crate for ID Mount Machine 58421
Metal Container for ID Mount Machine 59936
Wooden Crate Set for ID/OD Mount Machine 62679
Metal Container Set for ID/OD Mount Machine 61724
Tool ConfiguraTions
OPTION 3: To congure your FF8200 for Milling, or Milling with Single Pointing
To congure your machine, please follow these steps.
1 Select a Base Package
2 Select a Feed Assembly
3 Select a Drive Motor Assy
4 Select a Hydraulic Motor
5 Select an Optional Grinder
6 Select a Hydraulic Power Unit
7 Select a Turning Arm Assembly
8 Select a Counterweight Assy
Rotary table, tool kit, drag brake assemblies,. 62670
operator's manual.
2 Feed Assembly
Pneumatic Feed Assembly w/ Remote Air Control 58671
3 Drive Motor Assembly
Pneumatic Motor and Drive Assembly 62591
(Pneumatic drive system includes: Pneumatic
motor w/ttings and mount, gearbox, rotary
union, hoses, feed trip valve, cam, & pneumatic
conditioning unit with low pressure drop out.)
Hydraulic Drive Assy w/Gearbox & Feed 62594
Conditioning Unit - DOES NOT INCLUDE
MOTOR (Hydraulic drive system includes:
Hyd motor mount, gearbox, hoses, ttings,
rotary union, feed trip valve, cam, and
feed pneumatic conditioning unit.)
4 Hydraulic Motor for Rotary Table Drive
(If Hydraulic drive is selected in step 3)
Rated at 10 gpm, 1200 PSI
Fast RPM = Single Point Machining / Slow RPM = Milling
Hydraulic Motor, 4.9 cu in (80.3 cu cm), 69213
16 - 56 RPM / 0.1 - 0.35 RPM
Hydraulic Motor, 8.0 cu in (131.1 cu cm), 69214
8 - 32 RPM / 0.05 - 0.20 RPM
Hydraulic Motor, 14.9 cu in (244.2 cu cm), 69216
3.6 - 18 RPM / 0.02 - 0.11 RPM
Hydraulic Motor, 18.7 cu in (306.4 cu cm), 69217
2.8 - 14 RPM / 0.018 - 0.09 RPM
Hydraulic Motor, 24.0 cu in (393.3 cu cm), 69218
2.2 - 11 RPM / 0.014 - 0.07 RPM
Hydraulic Motor, 29.8 cu in (488.3 cu cm), 69219
1.8 - 9 RPM / 0.012 - 0.06 RPM
* Multiple units may be ordered.
5 Optional Grinder Attachment
Grinding Attachment for Pneumatic Table Drive Motor 62537
Grinding Attachment for Hydraulic Table Drive Motor 62570
Grinder Tooling
Grinding Wheel 1.5 in (38.1 mm), CBN 130 Grit 62633
Grinding Wheel 2.25 in (57.2 mm), CBN 130 Grit 62634
6 Hydraulic Power Unit
Single Pump (for pneumatic table rotation):
HPU 230V, 25HP Single pump with Air 62774
HPU 380V, 25HP Single pump with Air 62775
HPU 415V, 25HP Single pump with Air 62776
HPU 460V, 25HP Single pump with Air 62777
HPU 575V, 25HP Single pump with Air 62778
Dual Pump (with air) for hydraulic
table rotation,hydraulic milling head,
and air for grinding attachment:
HPU 230V, 25HP Dual Pump with Air 62779
HPU 380V, 25HP Dual Pump with Air 62780
HPU 415V, 25HP Dual Pump with Air 62781
HPU 460V, 25HP Dual Pump with Air 62782
HPU 575V, 25HP Dual Pump with Air 62783
Dual Pump (for hydraulic table rotation
9 Select a Milling Head
10 Select a Tooling
12 Select a Chuck Assembly
13 Select a Shipping Container
1 Base Package
and hydraulic milling head):
HPU 230V, 25HP Dual Pump 62784
HPU 380V, 25HP Dual Pump 62785
HPU 415V, 25HP Dual Pump 62786
HPU 460V, 25HP Dual Pump 62787
HPU 575V, 25HP Dual Pump 62788
Pendant Cable & Hose, Single Pump
0.75 in (19.1 mm) Hose and Pendant Cable Assy, 62803
20 ft (6.1 m)
0.75 in (19.1 mm) Hose and Pendant Cable Assy, 62804
30 ft (9.1 m)
0.75 in (19.1 mm) Hose and Pendant Cable Assy, 62805
50 ft (15.2 m)
0.75 in (19.1 mm) Hose and Pendant Cable Assy, 62806
100 ft (30.75 m)
Pendant Cable & Hose, Dual Pump
0.5 in (12.7 mm) & 0.75 in (19.1 mm) Dual Hose 62807
& Pendant Cable Assy, 20 ft (6.1 m)
0.5 in (12.7 mm) & 0.75 in (19.1 mm) Dual Hose 62808
& Pendant Cable Assy, 30 ft (9.1 m)
0.5 in (12.7 mm) & 0.75 in (19.1 mm) Dual Hose 62809
& Pendant Cable Assy, 50 ft (15.2 m)
0.5 in (12.7 mm) & 0.75 in (19.1 mm) Dual Hose 62810
& Pendant Cable Assy,100 ft (30.5 m)
7 Turning Arm Assembly
Milling Arm Assembly with Single Point Tool Head 62578
8 Counterweight Assembly
Counterweight Milling Arm Assembly 62527
9 Milling Head
Milling Head Assembly Inch #50 Taper NMTB 62282
Milling Head Assembly Inch #50 Taper CATV 62734
Milling Head Assembly Metric #50 Taper NMTB 62644
Milling Head Assembly Metric #50 Taper CATV 62735
10 Tooling (for inch milling head assembly only)
#50, NBTB 4 in (101.6 mm) Face Mill w/ Inserts 47383
#50, NBTB 5 in (127.0 mm) Face Mill w/ Inserts 47384
#50, NBTB 6 in (152.4 mm) Face Mill w/ Inserts 47385
#50, NBTB 8 in (203.2 mm) Face Mill w/ Inserts 47386
#50, NBTB 10 in (254.0 mm) Face Mill w/ Inserts 56175
Carbide Inserts 47229
11 Milling Head Swivel Assembly
Milling Head Swivel Plate Assembly 63250
12 Hydraulic Motor for Milling Head
Hydraulic Motor Assembly 8.0 cu in (131.1 cu cm) 53459
Hydraulic Motor Assembly 9.6 cu in (157.3 cu cm) 53458
Hydraulic Motor Assembly 11.9 cu in (195.0 cu cm) 46950
Hydraulic Motor Assembly 14.9 cu in (244.2 cu cm) 46375
Hydraulic Motor Assembly 18.7 cu in (306.4 cu cm) 46549
Hydraulic Motor Assembly 24.0 cu in (393.3 cu cm) 46550
13 Chuck Assembly
ID Chuck Assembly 57881
OD Chuck Assembly for Milling Arm 62669
ID/OD Chuck Assembly for Milling Arm 62677
14 Shipping Container
Wooden Crate for ID Mount Machine 58421
Metal Container for ID Mount Machine 59936
Wooden Crate Set for ID/OD Mount Machine 62679
Metal Container Set for ID/OD Mount Machine 61724
page 5
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
This model is so fast and easy to set up that an experienced operator can usually mount the machine into the
flange bore, align it, and start cutting in less than an hour.
Measure the
1
Select the
2
Install setup
3
bore diameter.
This will be used
to determine
the leg length.
appropriate
leg length and
foot.
ngers.
Set machine onto
ange using setup
5
6
7
ngers. Lightly
tighten leveling
feet in the ange.
Extend feet into
ange. Indicate,
level and tighten
leveling feet and
stationary feet.
Install tool bit.
Connect to
power.
Tighten legs.
4
page 6
You are ready
to begin
8
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
machining!
OperatiOnal DimensiOns
ID Chuck Assembly
Dimensions in Inch (mm)
Chucking and Machining Diameters:
Max: Ø120.0 (3048.0)
Min: Ø45.0 (1143.0)
Swing diameter,
single-point machining
Max: Ø127.7 (3243.6)Min:
Ø84.7 (2151.4)
Swing diamter, milling:
Max: Ø120 (3048.0) Min:
Ø82.8 (2103.1)
Dim A
Dim A (all ± 0.25 (6.4):
Max. clearance with tool head fully retracted
Turning arm, single point mach only: 1.76 (44.7)
Milling & turning arm 1.74 (44.2)
(either milling or single point machining)
Milling & turning arm, grinding: 1.64 (41.7)
page 7
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
Max Rotating Height:
Single point machining:
Ø15.51 ± 0.25 (394.0 ± 6.4)
Milling:
Ø21.84 ± 0.25 (554.7 ± 6.4)
12.13 ± 0.25 (308.1 ± 6.4)
minimum bore depth
NOTE: ± 0.25 (± 6.4) is travel of leveling foot
OperatiOnal DimensiOns
Machining Diameter:
Max: Ø120.0 (3048.0)
Min: Ø45.0 (1143.0)
Dimensions in Inch (mm)
OD Chuck Assembly
Dim B
136.4 (3464.6) max, (89.8 (2280.9) min)
Dim B:
With tool head fully retracted
Turning arm, single point mach only: 4.2 (106.7)
Milling & turning arm: 4.2 (106.7)
(either milling or single point machining)
Milling & turning arm, grinding: 4.1 (104.1)
Ø147.0 (3733.8) clearance at
maximum machining
35.2 (894.1) for single-point machining
39.1 (993.1) for milling
1.9 (48.3)
5.0 (127.0)
10.0 (254.0)
page 8
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
OperatiOnal DimensiOns
19.111
19.11
(485.4)
19.111
Milling Head Assembly
(182.9)
8.000
8.0
(485.1)
8.000
7.192
7.2
7.192
Dimensions in Inch (mm)
page 9
3.980
3.98
(101.1)
3.980
5.602
5.6
5.602
(142.2)
Overall Machine View
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone: 1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: Info@cpmt.com
CLIMAX GLOBAL LEARNING CENTER
Climax has been teaching the fundamentals and fine points of portable
machine tool operation for practically as long as we’ve been inventing and
building the tools.
At the Global Learning Center situated in our corporate headquarters near
Portland, Oregon, we provide training for machine tool operators on
portable machine tool safety and machine setup and operation. Trainees
also receive technical tips and tools to improve operational efficiencies, with
the vast majority of every program devoted to hands-on activities and skill
development.
The Climax instructional team includes specialists in shipbuilding, power
generation, civil engineering, bridge re-building, petrochemical and other
industries.
Whether it’s a regularly scheduled course at the Global Learning Center, or
custom curriculum conducted at your facility, your machinists will benefit
from courses developed by some of the most respected authorities in the
business.
Call us today to register for a regularly scheduled class, or talk to us about how we can customize a training program for your specialized application.
Call Climax for:
On-site Training
Need some refresher courses in
setting up and operating your Climax
machine tool?
Special Projects
Climax has been solving
complicated on-site machining and
welding problems for our customers
since 1964.
Rentals
With 16 worldwide rental depot
locations, you are never far away
from a Climax portable machine tool.
Climax Global Locations
Edmonton
World Headquarters
Portland
Houston
Monterrey
World Headquarters
2712 E. Second Street
Newberg, Oregon 97132 USA
Worldwide Telephone: 1.503.538.2185
N. America Toll-Free: 1.800.333.8311
Fax: 1.503.538.7600
Email: info@cpmt.com
Cincinnati
European Headquarters
Manchester
Baton Rouge
Manchester
Cologne
Charlotte
Production Facilities
Rental Locations
International Distributors
Regional Sales & Technical Support Offices
Gdansk
Singapore
Connect with us:
European Headquarters
Am Langen Graben 8
52353 Düren, Germany
Telephone:(+49) (0) 2421.9177.0
Fax: (+49) (0) 2421.9177.29
Email: info@cpmt.de
Perth
Copyright © 2013 Climax Portable Machining & Welding Systems. All Rights
Reserved. Climax has taken reasonable measures to ensure the accuracy of
the information contained in this document. However, Climax makes no
warranties or representations with respect to the information contained herein;
and Climax shall not be held liable for damages resulting from any errors or
omissions herein, or from the use of the information contained in this document.
Loading...