ELECTRIC AXIAL FEED ASSEMBLY
12
Electric Axial Feed Assembly
For Climax BB6100, BB7100 and BB8100 Boring Machines
2011
BEF1
The new Climax Electric Axial Feed
Assembly is designed for use on Climax
BB6100, BB7100 and BB8100 boring
systems. This new feed unit can be easily
adapted to boring machines utilizing 3.5, 5,
6, and 8 inch (88.9, 127, 152.4, and 203.2
mm) diameter bars.
Our electric feed unit not only provides you
with a feed rate that is infinitely adjustable
and reversible from 0.0 to 0.664 inches (0.0
to 17 mm) per minute (critical when
machining large diameter bores) but also
provides you with the capability to quickly
position (or reposition) the tool carrier
directly to the site where your machining
needs to be done. This capability will save
you a considerable amount of time when
repositioning the tool carrier and enable you
to complete your boring operations much
faster. The feed unit has a remote pendant
with a 3.5 foot (107 cm) cord, which allows
the user to control the feed rate, feed
direction and feed stop/start.
The Climax Electric Axial Feed Assembly is
made up of the following components:
• A compact, precision electric motor that
will provide you with infinitely adjustable
(and reversible) boring feed rate from 0.0
to 0.664 inches (0.0 to 17 mm) per
minute.
• A unique mechanical gearbox assembly
allows you to engage and disengage the
electric drive to the boring bar assembly.
With the electric drive disengaged, a
convenient port is revealed that allows a
hand drill to be attached for the purpose
of rapidly advancing the machine’s tool
carrier to the location to be machined. As
a safety factor, this drill access port is
blocked when the electric drive is
engaged to the boring bar assembly.
Main boring
bar assembly
Safety-activated drill
motor rapid
advance port
High precision
electric drive motor
• A special adaptor plate allows you to
easily connect the electric feed/
mechanical gearbox assembly to Climax
3.5, 5, 6, and 8 inch (88.9, 127, 152.4,
and 203.2 mm) boring bars. Adapters are
also available for competitive boring
systems.
Order inexpensive adapter plates to use on
more than one size boring bar!
Please contact your Climax Sales
Representative for ordering information.
Electric drive engage/
disengage lever
Mechanical gear box
assembly
Ordering Information
No. Description
43735 Electric Feed Assembly For
BB6100, 3.5 inch (88.9 mm)
diameter bar
43736 Electric Feed Assembly For
BB7100 or BB8100, 5 or 6
inch (127 or 152.4 mm)
diameter bar
43734 Electric Feed Assembly For
BB8100, 8 inch (203.2 mm)
diameter bar
CLIMAX PORTABLE MACHINE TOOLS
End mount sup-
port assembly
Technical Information
• The feed rate is infinitely adjustable and
reversible from 0.0 to 0.664
inches (0.0 to 17 mm)/minute.
• Rapid Advance is available using your
hand drill and a 7/16 inch (11 mm) drive
socket (included). Typical rapid feed
rates using your 0 - 400 RPM drill is 0.0
- 32 inches (0.0 - 813 mm)/min.
• Power requirements: 120/240V, 4A,
50/60Hz.
• The Climax Electric Axial Feed is also
available to fit competitive boring
systems.
ID mount bearing
support assembly
Rotational drive
assem
Tools head assembly
(manual assembly shown)
bly
Hydraulic motor
Adaptor feed axial assembly
Feed axial assembly
Boring bar/lead
screw assembly
Tool carrier assembly
Climax Electric Axial Feed Assembly
shown mounted to a
Climax BB8100 Boring Machine
Call Climax for:
On-site Training
Need some refresher courses in
setting up and operating your Climax
machine tool?
Special Projects
Climax has been solving complicated
on-site machining and welding
problems for our customers since
1964.
Rentals
With eleven worldwide rental depot
locations, you are never far away
from a Climax portable machine tool.
Climax Global Locations
Edmonton
World Headquarters
Portland
Houston
Monterrey
World Headquarters
2712 E. Second Street
Newberg, Oregon 97132 USA
Worldwide Telephone: 1.503.538.2185
N. America Toll-Free: 1.800.333.8311
Fax: 1.503.538.7600
Email: info@cpmt.com
Cincinnati
European Headquarters
Manchester
Baton Rouge
Manchester
Cologne
Charlotte
Production Facilities
Rental Locations
International Distributors
Regional Sales & Technical Support Offices
Gdansk
Singapore
Connect with us:
European Headquarters
Am Langen Graben 8
52353 Düren, Germany
Telephone:(+49) (0) 2421.9177.0
Fax: (+49) (0) 2421.9177.29
Email: info@cpmt.de
Perth
Copyright © 2012 Climax Portable Machining & Welding Systems. All Rights
Reserved. Climax has taken reasonable measures to ensure the accuracy
of the information contained in this document. However, Climax makes no
warranties or representations with respect to the information contained herein;
and Climax shall not be held liable for damages resulting from any errors or
omissions herein, or from the use of the information contained in this document.
Loading...