Clifford 3.3X Owner’s Guide

Responder LE Model 3.3X

Security and Remote Start

Owner’s Guide

Limited lifetime consumer warranty

Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace (at Directed’s

election) with a comparable reconditioned model any Directed unit (hereafter the “unit”), excluding with-

out limitation the siren, the remote transmitters, the associated sensors and accessories, which proves to

be defective in workmanship or material under reasonable use during the lifetime of the vehicle provided

the following conditions are met: the unit was purchased from an authorized Directed dealer, the unit

was professionally installed and serviced by an authorized Directed dealer; the unit will be professionally

reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and the

unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other dated proof of

purchase bearing the following information: consumer’s name, telephone number and address; the autho-

rized dealers name, telephone number and address; complete product description, including accessories;

the year, make and model of the vehicle; vehicle license number and vehicle identification number. All

components other than the unit, including without limitation the siren, the remote transmitters and the

associated sensors and accessories, carry a one-year warranty from the date of purchase of the same. ALL

PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF PURCHASE WILL BE DENIED.

This warranty is non-transferable and is automatically void if: the original purchaser has not completed the

warranty card and mailed it within ten (10) days from the date of purchase to the address listed on the

card; the unit’s date code or serial number is defaced, missing or altered; the unit has been modified or

used in a manner contrary to its intended purpose; the unit has been damaged by accident, unreason-

able use, neglect, improper service, installation or other causes not arising out of defects in materials or

construction. The warranty does not cover damage to the unit caused by installation or removal of the

unit. Directed, in its sole discretion, will determine what constitutes excessive damage and may refuse the

return of any unit with excessive damage.

TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS

WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND

WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED

NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR

LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY

FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. DIRECTED

SECURITY SYSTEMS, INCLUDING THIS UNIT, ARE DETERRENTS AGAINST POSSIBLE THEFT. DIRECTED IS NOT

OFFERING A GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE OR THEFT OF THE AUTOMOBILE, ITS

PARTS OR CONTENTS; AND HEREBY EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITH-

OUT LIMITATION, LIABILITY FOR THEFT, DAMAGE AND/OR VANDALISM. THIS WARRANTY DOES NOT COVER

LABOR COSTS FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT OR ANY CONSEQUENTIAL DAM-

AGES OF ANY KIND. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE

VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLI-

CABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM

AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE

OF THE UNIT. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT

NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGE TO VEHICLE, DAMAGES

FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE

LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE

OR REPAIR THE CONTROL MODULE SUBJECT TO THE CONDITIONS AS DESCRIBED HEREIN. THIS WARRANTY IS

VOID IF THE UNIT HAS NOT BEEN PURCHASED FROM DIRECTED, OR AN AUTHORIZED DIRECTED DEALER, OR

IF THE UNIT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE, ACTS OF GOD, NEGLECT,

IMPROPER SERVICE, OR OTHER CAUSES NOT ARISING OUT OF DEFECT IN MATERIALS OR CONSTRUCTION.

Some states do not allow limitations on how long an implied warranty will last or the exclusion or limita-

tion of incidental or consequential damages. This warranty gives you specific legal rights and you may also

have other rights that vary from State to State.

This warranty is only valid for sale of product(s) within the United States of America. Product(s) sold

outside of the United States of America are sold “AS-IS” and shall have NO WARRANTY, express or implied.

This product may be covered by a Guaranteed Protection Plan (“GPP”). See your authorized Directed dealer

for details of the plan or call Directed Customer Service at 1-800-876-0800.

Make sure you have all of the following information from your authorized Directed dealer:

A clear copy of the sales receipt, showing the following:

o Date of purchase

o Your full name and address

o Authorized dealer’s company name and address

o Type of alarm installed

o Year, make, model and color of the automobile

o Automobile license number

o Vehicle identification number

o All security options installed on automobile

o Installation receipts

920-0003 06-06

iii

Government Regulations

This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician for help.

This device complies with the Industry Canada Radio Standards Speciﬁcation RSS 210. Its use is authorized only on a no-interference, no-protection basis; in other words, this device must not be used if it is determined that it causes harmful interference to services authorized by IC. In addition, the user of this device must accept any radio interference that may be received, even if this interference could affect the operation of the device.

Warning:

Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.

Table of contents

Limited lifetime consumer warranty . . . . . . . . . . . . . . . . . . . . . ii

Government Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iv

What is included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Important information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Your warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Replacement remotes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Responder LE 2-Way . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Responder LE 1-way . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Transmitter configuration . . . . . . . . . . . . . . . . . . . . . . . . . . 5

System maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Low battery indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Battery Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Remote control programming . . . . . . . . . . . . . . . . . . . . . . . 11

Multi-car control capability . . . . . . . . . . . . . . . . . . . . . . . . 13

Adjusting the onboard shock sensor . . . . . . . . . . . . . . . . . . 13

What’s New . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Using the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Warning! Safety first . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Arming the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

While the system is armed . . . . . . . . . . . . . . . . . . . . . . . . . 22

Modified Arming Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Disarming the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

System override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Using the remote start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Before using your Remote Start . . . . . . . . . . . . . . . . . . . . . 27

Remote starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . 27

Points to remember . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Runtime Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Manual transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Timer mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Turbo timer mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Cabin temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Safety features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Starter anti-grind circuitry . . . . . . . . . . . . . . . . . . . . . . . . . 33

Disabling the remote start system . . . . . . . . . . . . . . . . . . . . 33

Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Arming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Disarming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

System status chirps . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Table of zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Interpreting zone diagnostics . . . . . . . . . . . . . . . . . . . . . . . 36

Nuisance prevention® circuitry . . . . . . . . . . . . . . . . . . . . . . 37

Owner recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Rapid resume logic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Power saver mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

2-way remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Programming options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Security & convenience expansions . . . . . . . . . . . . . . . . . . . . . 42

Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Quick Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

What is included

■ The control module with Stinger™DoubleGuard®two-stage shock

sensor

■ Control center (installed out of sight on your vehicle) with

integrated status LED and Valet override switch

■ One five-button/2-way Supercode Responder LE Remote Control

■ One five-button/ 1-way Supercode remote

■ Revenger™Soft Chirp™six-tone siren

■ A shut-down toggle switch

■ Window decals

■ Your warranty registration

��

Important information

Congratulations on the purchase of your state-of-the-art remote start and alarm system. Due to the complexity of this system, it must be installed by an authorized dealer only. Installation of this product by anyone other than an authorized dealer voids the warranty. All dealers are provided with a preprinted dealer certiﬁcate to verify authorization. By carefully reading this Owner’s Guide prior to using your system, you will maximize the use of this system and its features. You can print additional or replacement copies of this manual by accessing our web site at www.directed.com.

Your warranty

Your warranty registration must be completely ﬁlled out and returned within 10 days of purchase. Your product warranty will not be validated if your warranty registration is not returned. Make sure you receive the warranty registration from your dealer. It is also necessary to keep your proof of purchase, which reﬂects that the product was installed by an authorized dealer.

Replacement remotes

Your system comes with one Responder LE remote control (P/N 7251X) and one companion remote control (P/N 7152X). If additional remotes are desired, please see your authorized dealer or visit www.directedstore.com to order.

Caution

This product is designed for fuel injected vehicles only. Use of this product in a standard transmission vehicle must be in strict accordance with this guide.

Responder LE 2-Way



531;

,&$

)&&,'(=6'(,

%$77(5<&5

Description

Transmit indicator

LED indicators Blinks indicate function confirmation

Lock button Press for one second to arm.

Unlock button Press for one second to disarm.

Remote start button

Auxiliary button

Function button

2 WAY Label Back of remote has label to identify the

Battery Tray Remove to access batteries when neces-

Note: If Keypad Lock is On, press and then press

Feature

Press for one second to activate remote start.

Press and hold for 1.5 second to activate optional trunk release.

Allows access to programming and modifies operation of the other buttons.

remote as 2-way or 1-way.

sary. For more details, see p.10

to exit.

Responder LE 1-way



531;

,&$

)&&,'(=6'(,

%$77(5<&5



531;

,&$

)&&,'(=6'(,

%$77(5<&5

Feature

Description

Transmit indicator

Lock button Press for one second to arm.

Unlock button Press for one second to disarm.

Remote start button

Auxiliary button

Function button

1 WAY Label Back of remote has label to identify the

Battery Tray Remove to access batteries when neces-

Note: If Keypad Lock is On, press and then press

Press for one second to activate remote start.

Press and hold for 1.5 second to activate trunk release.

Allows access to programming and modifies operation of the other buttons.

remote as 2-way or 1-way

sary. For more details, see p.10

to exit.

Transmitter configuration

Level Button

x 0 x 1 x 2 x 3 x 4

LOCK

ARM

SILENT

ARM

SENSOR BYPASS

ARMED (SILENT

SENSOR)

ARMED (SILENT

TRIGGER)

UNLOCK

DISARM

SILENT

DISARM

VALET MODE CAR FINDER —

REMOTE START

REMOTE

START

RUNTIME

RESET

TIMER MODE SMART START

REAR

DEFOGGER

AUX

TRUNK

RELEASE

AUX 1 AUX 2 AUX 3 —

FUNCTION

SHIFT

CABIN

TEMPERATURE

REQUEST

(2-way Only)

ARM STATUS

(2-way Only)

RUNTIME

CHECK

(2-way Only)

LAST

TRIGGER

REQUEST

(2-way Only)

REMOTE CONTROL FUNCTIONS TABLE

A U

Note: button must be pressed and finally held to access state.

Button Command Conﬁrmation Feedback

(2-way remote only)

Press one time to Arm

Arm

Press one time to

Disarm

Press one time to acti-

vate Remote Start

Remote

Start

AUX

Function

Shift

Pressing more than one button simultaneously generates an Error tone and the F-Shift LED turns ON.

Press and hold for 1.5 seconds to activate the Trunk Release.

Press 1 to 4 times. ( See Function shift table.)

Lock LED blink for one second with 1 Beep and siren tone Unlock LED blink for one second with 2 Beeps

Remote start LED blinks for 3 seconds, Start tones.

The AUX LED comes on for 3 seconds, and AUX activation tone sounds.

LED indicators turn on (according to the feature command.)

Remote

Press/hold for 1.5 seconds to Arm the system and then activate the Panic output

This is an optional feature. See your sales rep/installer for details.

Each Press then release, shifts the function of the command button.

Notes

Feature Command Conﬁrmation

A U

Silent Arm

Silent Disarm

Runtime

reset

Aux 1

Press one- time

and then press .

Press one- time and then press

Press one-time and then .

Press one time and then press

Feedback

Arm/Lock LED on, no audio

Disarm/Lock LED on, no audio

Remote start ON tones.

The AUX LED comes on for 3 seconds, and AUX activation tone sounds.

Notes

Arms the system without chirps

Disarms the system without chirps

Re-starts the remote start runtime counter if remote start is active. Note: If remote start is not active, the 2-WAY remote will respond with error tone.

This is an optional feature. See your sales rep/installer for details.

Cabin

temperature

Sensor Bypass

Press one time, then Hold for 1.5 seconds.

Press twotimes and then .

Multiple LEDs blink, and 1 beep

Arm/Lock LED on, 1 beep

Cabin temperature is displayed on the remote. LED lights up to indicate a range. (See page 30.)

Available when armed only: bypasses warn triggers. Send again to bypass Warn & Full Trigger; Send again to turn bypass off and monitor sensors normally. For more information, see Modified Arming Modes on page 24

Feature Command Conﬁrmation

A U

Valet Mode

Timer mode

Aux 2

Press two-

times and then

Press twotimes and then

Press two times and then press

Feedback

UnLock LED on and beeps 1 or 2 times

Remote start LED on.

The AUX LED comes on for 3 seconds, and AUX activation tone sounds.

Notes

To enter or exit Valet mode, even if Armed. When entering Valet Mode the unlock LED blinks, and the remote beeps one time. When exiting Valet Mode the unlock LED blinks and the remote beeps two-times.

Enables or disables the remote start timer mode.

This is an optional feature. See your sales rep/installer for details.

Armed status

Press twotimes and then Hold for 1.5 seconds.

If system is Armed: Lock LED blink for one second with 1 Beep If system is Disarmed: Unlock LED blink for one second with 2 beeps

Replays last Arm /Disarm status message received.

Feature Command Conﬁrmation

A U

Armed (Silent

Sensor mode)

Car Finder

Smart Start

Aux 3

Runtime

check

Press three-

times and then .

Press threetimes and then

Press threetimes and then press .

Press three times and then press

Press threetimes, and then Hold for 1.5 seconds.

Feedback

LED on, 1 beep & 3 error tone

On Remote Control: Unlock LED on with 1 short beep

On Vehicle: 1 long siren chirp and parking lights flash 10 times.

Remote Start LED on, with 1 (for enable) or 2 (For disable) beeps

The AUX LED comes on for 3 seconds, and AUX activation tone sounds.

Remote Start ON tones.

Notes

Arms the system; sensor Full Trigger will ONLY page the remote and will not activate the siren/lights. Wired inputs will page and activate the siren/lights.

Arm/Disarm cancels the light flashes.

Enables or disables the SmartStart feature.

This is an optional feature. See your sales rep/installer for details

Runtime remaining is displayed on the remote. (See page 28).

Feature Command Conﬁrmation

Armed (Silent Trigger mode)

Rear

Defogger

Last Trigger

Press fourtimes and then .

Press four times, and then

. (Only after remote start is on.)

Press fourtimes and then hold for 1.5 seconds.

Feedback

Lock LED on, 1 beep & 4 error tone

Remote start LED ON, 1 beep.

Replays the last trigger message received.

Notes

Arms the system; sensor and hardwire Full Triggers will ONLY page the remote and will not activate the siren/lights. For more details see Silent Mode 2 section on page 25.

Automatically turns on during remote start.

Trigger refers to the remote tones and LED pattern generated by the last alarm trigger event.

Out of Range Notification

If a command is issued from the remote, but the remote is beyond the range of the vehicle to receive the command, the remote will respond with an Out of Range notification. If this occurs, the remote will Blink rapidly the transmit indicator, turn on the F indicator and play the error tone.

Since conditions will vary in different areas (ie: Weather, RF interference, etc) range may be affected and require you to be closer to the vehicle for successful transmission.

System maintenance

The system requires no speciﬁc maintenance. Your remotes are powered by small coin cell lightweight 3-volt lithium batteries that will last approximately one year under normal use. The 2-way remote uses two CR2016 cell batteries and the 1-way remote uses one CR2032 cell battery. When the battery begins to weaken, the operating range will be reduced.

Low battery indicator

When the batteries are low on the 2-way remote it will emit two groups of beeps, the LED will ﬂash, and the alarm will emit an additional chirp to let you know its time to change the battery. When the battery is low on the 1-way remote, the remote responds the same, but without the LED ﬂash.

Note: The Arm/Disarm chirps should be programmed ON for the alarm to emit any additional chirps during disarm. Ask your authorized dealer if you have any questions.

Battery Replacement

Press tab to release tray and pull out to expose the battery in the holding tray. Remove the expired battery. Place the new battery into the remote control. When power is returned the remote control is ready for use. This tab is small and recessed and may require a small ﬂat object such as a jeweller’s ﬂathead screwdriver to unlatch.

Remote control programming

The Responder LE 2 way remote control has menus for programming the remote to the system control module including adjusting the control module onboard shock sensor, and for configuring the remote control user features.

To program the remote user features:

Press and hold the button for 12 seconds: (at 3 seconds ignore

1. the Car number indicator.) The remote emits one long beep, and the Transmit LED turns on.

2. This indicates the Main menu. Press and hold the

3. The remote beeps two-times, and the Transmit LED blinks two-times and stays on. You are now in the Remote Configuration menu. The Arm, Disarm, Remote Start & Aux LEDs will turn ON, and/or blink to indicate the current remote feature configuration. When the LED is ON, the feature is ON.

To configure the remote control features press and release the command button. The LED next to the button will turn On then OFF. The remote beeps to indicate the feature configuration.

Button: Auto-Button Lock.

When Arm LED is OFF, buttons will not lock.

LED ON: The buttons automatically lock 60 seconds after the last button operation to avoid accidental Command operations. When locked, if any command button is pressed the remote will emit an error output.

If button lock is ON, press , and then

button for 1.5 seconds:

buttons.

+ 39 hidden pages