Cleveland Range KGL-40-T User Manual
Cleveland
™
P
roject ________________________________
I
tem __________________________________
Quantity _______________________________
FCSI Section ____________________________
A
pproval _______________________________
D
ate __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
GAS KETTLES
LEG TYPE, GAS-FIRED KETTLES
TILTING, 2⁄3 STEAM JACKETED
“SPLASH PROOF SERIES”
40, 60, or 80 GALLONS (150, 225, or 300 LITERS)
Cleveland Standard Features
n H
igh efficiency Power Burner Heating System (62% to
65% efficiency)
n Fast Heat-up and Recovery Time, 140M BTU’s on 40 gallon
models, 190M BTU’s on 60 gallon and larger
n Insulated Heat Exchanger
n Automatic Ignition System
n Steam Jacket permanently filled with treated, distilled water.
Venting and/or refilling not required.
n Solid State Controls, for Temperature and Low Water Safety,
in a plug-in Control Module
n Control Panel includes:
n
Precise, consistent temperature control: less than
n
± 1°C variance (ideal for simmering).
n
L.E.D. Indicators for Heat Cycle and Low Water Warning.
n
Power
“on/off” Switch
n Front mounted combination Pressure/Vacuum Gauge
n Type 304 Stainless Steel with #4 finish on kettle and supports
n Tilt Mechanism of roller bearings and case hardened
self-locking worm and segment gear
n Support Legs with level adjustable feet, flanged for floor bolting
n 50 psi Steam Jacket Rating and Safety Valve
n Standard voltage is 115 volts, 60 Hz, single-phase,
supplied with cord and plug
n Standard for natural gas operation
ypical approvals include
n T
Options & Accessories
AGA, CSA, CE, NSF and
ASME
MODELS: c KGL-40-T c KGL-80-T
c KGL-60-T
Shown with optional Spring Assisted
Cover and 2" T
Shall be CLEVELAND, Gas-Fired Tilting Kettle, Model KGL- _____ T;
_____gallons, 2⁄3 Steam Jacketed, Power Burner Heating System,
Insulated Heat Exchanger, 50 psi Steam Jacket Rating. Infinite
Variable Temperature Control, L.E.D. indicators for Heat Cycle and
Low Water Warning, Automatic Ignition System.
angent Draw-Of
alve
f V
Short Form Specifications
p Type 316 Stainless Steel Kettle Liner for high acid food
products (316)
p Pan Carrier (PCK)
p Flow Diverter (FD)
p Food Strainer (FS)
p Kettle Markings (KM)
p Cooking Baskets and Tri-Basket Supports (BS and TBS)
p Drain Strainers (DS-)
p Faucet Mounting Bracket (FBKT)
p 2˝ or 3" diameter Tangent Draw-Off Valve with Drain Strainer
(TD2 or
TD3*), *TD3 for 60 and 80 gallon only and will raise
height of kettle by 5-5/8" (143mm)
p 3" diameter Butterfly Valve (BV3)
p Spring-assisted, hinged, rotatable, domed Stainless
Steel Cover (CHS-)
p Hot and Cold Water Faucet with Swing Spout (DPK)
p Kettle Accessory Kit (KAK) includes:
p Clean-up Brush(CB) p 36” Kettle Paddle (KP)
p 36” Kettle Whip(KW) p 36” Kettle Brush (KB)
p Draw-of
p Automatic Water Meter (GMF or LMF)
p Measuring Strip (MS)
p Option for Propane Gas operation
p Correctional Package
p Heat Deflector Shield (HS001)
f Brush (DB)
p 24 oz. Ladle (KL)
SECT. IX PAGE 7
0707
J
K
C
H
N
O
M
L
Q
P
3"
(77 mm)
R
EF
S I.D.
C
B
A
G
HANDWHEEL REPLACED
BY SWITCH FOR
POWER TILT OPTION
H
F
E
D
2 1/4"
(
57 mm)
REF
2 1/2"
(
64 mm)
2 1/2"
(64 mm)
4 1/8"
(105 mm)
3" (77 mm)
MIN.
CLEARANCE
UNIT SHOWN WITH OPTIONAL 2" TANGENT DRAW-OFF VALVE,
SPRING ASSIST COVER AND HOT & COLD WATER FAUCET.
9
/16"
1
4
m
m
120º
T
YP
1
" (25
m
m)
M
AX. ADJUSTMENT
1 5/8" (42 mm)
Ø
F
LANGED FOOT DETAIL
7/16" (11
m
m) Ø
3 HOLES ON
3
1/8" (80
m
m)
Ø
B.C.D.
4
7/8"
124
Ø mm
RECOMMENDED
FLOOR SLOPE
1" (26 mm) per 4' (1220 mm)
PIPE DRAIN RECOMMENDED
m
in. valve size plus 1" (26 mm)
4" (102 mm)
RECOMMENDED
V
ALVE OPENING
NOTE
: TD3, 3" tangent draw off will
raise height of kettle by 5-5/8" (143mm).
Available on 60 & 80 gallon models only.
H
C
H
C
DIMENSIONS
GALS./
LITERS A B C D E F G H J K L M N O P Q S I.D.
40
150 mm 1163 108 966 889 229 1074 1804 1029 394 591 483 909 112 610 839 1601 661
60
225 mm 1255 1169 1055 940 299 1201 1905 1112 388 623 559 1001 153 712 940 1728 750
80
300 mm 1347 1245 1131 991 375 1296 1982 1137 356 635 635 1093 178 762 1016 1829 839
IN
45 3/4
IN
49 3/8
IN
53
38 35 9 42 1/4 71 40 1/2 15 1/2 23 1/4 19 35 3/4 4 3/8 24 33 63 26
42 1/2
41 1/2
46
44 1/2
49
37 11 3/4 47 1/4 75 43 3/4 15 1/4 24 1/2 22 39 3/8 6 28 37 68 29 1/2
39 14 3/4 51 78 44 3/4 14 25 25 43 7 30 40 72 33
CAPACITIES: (in 8 oz. servings,
other sizes may be calculated)
40 Gallon / 150 liters . . . 640 servings
60 Gallon / 225 liters . . . 960 servings
80 Gallon / 300 liters . . . 1280 servings
1
⁄2˝ dia. Soft
Copper
ubing (each)
T
When
ordered with
optional
faucet.
RIGHT
LEFT = 0˝
REAR = 3˝
Allow 6˝ space minimum
from rear and sides when
located near combustible
walls. 12" recommended on
right side for service
GAS CLEARANCE
Manufacturer must be notified if unit will be operated above 2,000 ft. altitude.
TURAL
NA
3
Piping:
⁄4˝ N.P.T. Piping: 3⁄4˝ N.P.T.
Supply pressure: Supply pressure:
4.00˝ W.C. minimum 4.00˝ W.C. minimum
.C. maximum 14.00˝ W.C. maximum
14.00˝ W
PROP
ANE
TING
.U. RA
B.T
40 gal. 140,000
60 gal.
190,000
80 gal.
100 gal.
-1 Phase, 60 Hz, 10
120V
amps
WATERELECTRIC
TES
NO
:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Installation of backflow preventers, vacuum breakers and other specific coder requirements is the responsibility of the owner and installer.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., A.G.A., NSF, ASME/N.Bd., CSA, CGA, ETL and others.
=
0˝
SECT
.
AGE
IX P
1003
Litho in U.S.A.
8
Loading...