Cleveland Range HA-MKDL-300-CCT-RL, HA-MKDL-200-CCT-RL, HA-MKDL-100-CCT-RL, HA-MKDL-150-CCT-RL, HA-MKDL-60-CCT-RL User Manual

Cleveland

™

roject ________________________________

Item __________________________________

Quantity _______________________________

CSI Section ____________________________

pproval _______________________________

ate __________________________________

1333 East 179 St.,

Cleveland, Ohio, U.S.A. 44110

Tel: 1-216-481-4900

Fax: 1-216-481-3782

Web Site: www.ClevelandRange.com

Email: Steam@ClevelandRange.com

ENU

PWR

Cooking Mode

 O O

emperature

Control

Agitator Speed Control

Manual

Steam Start

Auto Cook Start

Set Point

Product Temp

64.0

tart

Manual

Cool Start

C O N T R O L

W A T E R

T I L T

D R A I N

COOK CHILL SYSTEMS

Cook/Chill Systems

COOK/CHILL HORIZONTAL AGITATOR TILTING MIXER KETTLES with "RL" Touch Screen Controls

Cleveland Standard Features

I Full 60, 100, 150, 200 or 300 gallon working capacity I Electric driven, horizontal agitator mixer arm I Hydraulic powered kettle tilt with kettle mounted power-pack I Variable mixer speed control I Spring-loaded blades scrape entire heated surface area I Agitator mixing fins for most efficient, uniform mixing, heating

and cooling

I Flush mounted, easily removable temperature sensor I Simmer control for cooking delicate products I 3” diameter air operated, flush mounted piston draw-off valve I Spiral flights for even product cooling I Removable agitator without the use of tools I Spring assisted, one piece cover (bi-fold cover with counter-

weight for 300 gallon models and larger)

I Heavy duty rim bar I 100 psi steam jacket rating and safety valve I Type 316 stainless steel for all food contact surfaces I Water fill faucet with swing spout I Kettle mounted valve box for single point utility connections I Automatic water meter for hot and cold kettle fill water I NSF approved I Accepted for use in USDA inspected facilities

Features for Kettle mounted “Touch Screen” operating controls:

I Microprocessor operating controls mounted in water tight

(type 4X) stainless steel housing (approx. 30” high, 22 1/2" deep, 11 1/2" wide)

I Selectable multi-language control display I Digital temperature controls via temperature sensor for auto-

matic product cooking and cooling

I Controls for manual cooking and cooling I Simmer Control for cooking delicate products I Special simmer control for delicate products

Digital display shows actual product temperature and set points

I Variable mixer speed control I Mixer “Emergency Stop” button I Controls for automatic water meter I Automatic recording of Time and Temperature for HACCP doc-

umentation

I Web-page enabled interface (via cable) with office computer or

PC for tracking and charting batch processing according HACCP and food safety guidelines.

I Removable, compact flash memory card for recording process-

ing times and temperatures.

MODELS:

 HA-MKDL-60-CCT-RL

 HA-MKDL-100-CCT-RL

 HA-MKDL-150-CCT-RL

 HA-MKDL-200-CCT-RL

 HA-MKDL-300-CCT-RL

Short Form Specifications

Shall be CLEVELAND Model HA-MKDL-___-CCT-RL; COOK/CH I LL HORIZONTAL TILTING MIXER KETTLE, ___ gallons; leg mounted; 2/3 jacketed, direct steam;100 psi Steam Jacket Pressure Rating; 316 Stainless Steel Liner; electrically driven Horizontal Agitator; Variable Mixer Speed Control; Hydraulic Tilt with kettle mounted power-pack; 3" diameter air operated, flush mounted Piston DrawOff Valve; spring loaded Scraper Blades; flush mounted Temperature Sensor;; Automatic Water Meter; Water Fill Faucet with swing spout; Kettle mounted “RL” Control Panel.

Options & Accessories

Ë Clean in place (CIP) agitator idler bearing with connector for

hot water or steam

Ë Single or dual remote control center Ë Stainless steel bi-fold hinged cover Ë Dolly for horizontal agitator Ë 3 inch diameter, 90° Elbow Ë Food Strainer Ë Flow Diverter Ë 3” flush mounted ball valve Ë Loading bucket and dolly Ë Electric chain hoist for lifting

the product load

SECT. XIV PAGE 9B

0907

QUICK DISCONNECT

FOR FOOD PUMP

12 1/2"

PLUMBING BOX

WITH REMOVABLE

ACCESS PANEL

POURING LIP AND POURING DEFLECTOR

PLAN VIEW

SIDE VIEW

ADCR

MINIMUM

CLEARANCE

FOR

KETTLES

FRONT 36"

IDE 12"

S REAR 12"

LECTRICAL POWER

O AND FROM

ONTROL PANEL

• CONTRACTOR MUST CUT ENTRY HOLE

TOP OR BOTTOM

•

OWER ENTRY

ECOMMENDED

R MUST USE PROPER

•

ONNECTIONS TO

AINTAIN U.L.

ISTING

DIMENSIONS

MODEL ABCDEFGHELECTRICAL (per kettle) R.P.M.

208V/ 3PH/60Hz HA-MKDL-60-CCT-RL HA-MKDL-100-CCT-RL HA-MKDL-150-CCT-RL HA-MKDL-200-CCT-RL HA-MKDL-300-CCT-RL

59" 36 3/4" 22" 50" 83" 46" 5" 63" 15 AMPS 3-22 72" 42" 25" 57" 95" 52" 5" 69" 18 AMPS 3-20 75" 47 1/2" 29" 65" 105" 57" 5" 74" 18 AMPS 3-18

80 1/2" 52" 32" 70 1/4" 115" 62" 5" 79" 25 AMPS 3-18

92" 65 1/2" 34" 82" 106" 67" 5" 84" 25 AMPS 3-16

UTILITY CONNECTIONS

CHILLED CHILLED COLD

WATER WATER POTABLE HOT CONDENSATE AIR

MODEL INLET RETURN WATER WATER RETURN DRAIN INLET STEAM

HA-MKDL-60-CCT-RL

3/4" 3/4" 3/4" 3/4" 1/2" 3/4" 1/2" 3/4"

15 GPM 15 GPM 15 GPM 1 CFM 320 lbs/hr

HA-MKDL-100-CCT-RL

1" 1" 3/4" 3/4" 3/4" 1" 1/2" 1"

20 GPM 20 GPM 20 GPM 1 CFM 525 lbs/hr

HA-MKDL-150-CCT-RL

1 1/4" 1 1/4" 3/4" 3/4" 1" 1 1/4" 1/2" 1 1/4"

20 GPM 20 GPM 20 GPM 1 CFM 780 lbs/hr

HA-MKDL-200-CCT-RL

1 1/4" 1 1/4" 3/4" 3/4" 1" 1 1/4" 1/2" 1 1/4"

25 GPM 20 GPM 20 GPM 1 CFM 1050 lbs/hr

HA-MKDL-300-CCT-RL

1 1/2" 1 1/2" 3/4" 3/4" 1" 1 1/2" 1/2" 1 1/2"

30 GPM 20 GPM 20 GPM 1 CFM 1575 lbs/hr

HOT FILL WATER IS STANDARD

65 PSI STEAM OPERATING PRESSURE IS RECOMMENDED

NOTES: The pressure drop is 12 to 15 PSI for steam and chilled water passing through the kettle.

Air must be dry, clean and free of oil.

Cleveland Range reserves right of design improvement or modification, as warranted.

(NOT TO SCALE)

SECT. XIV PAGE 1

SECT. XIV PAGE 10B

1201

0907

Litho in USA