Cleveland MFS User Manual

Cleveland
P
roject ________________________________
Item __________________________________
Quantity _______________________________
F
A
pproval _______________________________
D
ate __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
COOK CHILL SYSTEMS
Cook/Chill Systems
PRODUCT METERING FILLING STATION
Cleveland Standard Features
I Air operated Piston Pump with volume adjustment from 20 to
128 oz. per stroke
I Adjustable speed control in both directions
I Air operated product dispensing valve assures accurate por-
tion control
I Cabinet with hinged doors, permitting full access for
cleaning and service.
I Cabinet top with sink and lift-off grid
I Two 8" wheels and two 5" locking swivel casters with brakes
for stability during pumping
I Narrow design - only 24" wide for easy mobility and storage
I Mounting bridge for clipper and label dispenser
I Two (2) - 3-foot long sections of 3" diameter food hose
I Removable receptacles for casings
I One eight (8) foot-long flushing hose for easy clean-up
I Spare parts kit (gaskets, wrenches, etc.)
I Brush set for easy cleaning
I Accepted for use in USDA inspected facilities
MODEL:MFS
Options & Accessories
Ë Casing Clipper
Ë Label Printer
Ë Ring stand for hand filling
Ë Spare product hose with fittings (specify length)
Ë Pan Filler Assembly
Ë Extra 3" food hoses (specify length and male/female ends) Ë 3" x 90° stainless steel elbow
Unit shown with optional casing clipper
Short Form Specifications
Shall be CLEVELAND Model: MFS-__: Product Metering Filling Station with; selector switch for single stroke and continuous oper­ation; air operated positive displacement piston style pump with adjustable speed controls and stroke from 20 to 128 oz; air con­trolled product dispensing valve; cabinet with hinged doors, sink with drain and lift-off wire grid for easy clean-up. Unit comes with two 3 foot long food hoses, label dispenser, spare part kit and cleaning brush set.
SECT. XIV PAGE 25
0609
56 3/4"
22"
29 1/4"
12"
47 1/2"
FRONT VIEW
SIDE VIEW
TOP VIEW
CLIPPER
69"
A
D
RAIN
22 3/4"
OPTIONAL CASING CLIPPER
Z-4100HL
30"
30"
24"
D
1 D 2
B
D
1 D 2
B
NOTE: AIR MUST BE DRY, CLEAN AND FREE OF OIL
MODEL AIR ELECTRICAL
MFS (without Clipper) 15 CFM, 90 to 110 PSI NONE MFS (with Clipper) 25 CFM, 90 to 110 PSI NONE
Cleveland Range reserves right of design improvement or modification, as warranted.
(NOT TO SCALE)
SECT. XIV PAGE 26
0609
Litho in USA
Loading...