Cleveland KF-6E User Manual
UNDERCOUNTER & SANDWICH/SALAD PREP UNITS
CABINET
Stainless steel top, front, doors, and exterior
ends.All metal welded construction. All
joints and seams closed and sealed.
Enclosed rear with removable machine
compartment panel, zinc coated exterior
steel bottom and rear with coved,
sanitary aluminum interior. The
unit is supported by
6" minimum height
adjustable legs with
non-marring feet.
Sandwich and
salad unit model
tops are provided
with a foamed-inplace, high impact
non-conducting
thermobarrier, raised
edge breaker frame.
Opening fitted with
1/6 size 4" drop high
impact plastic salad
pans. Openings will
accommodate 6" deep
inserts (not provided).
SELF-CONTAINED REFRIGERATION
The system is a forced-air with automated
defrost, hermetic design with capillarymetering device and automatic thermostat.
All models are complete with a removable,
energy free automatic condensate evaporator.
No floor drain or plumbing connections
required.
DOORS
Self-closing with full face stainless steel
exterior and aluminum inner pan. Doors
are self-closing with safety stops and
stay-open feature. Doors on single
section models are factory hinged right (facing
cabinet) but are reversible and can be quickly
re-hinged without special
tools (with additional
hardware).
WARRANTY
Two-year parts and labor
- best in industry. Also
includes an additional
3-year (5-year total)
parts warranty on the
evaporator and compressor.
All units are performance
tested on the production
line prior to
shipping.
insulated with one shot, closed
cell, foamed-in-place polyurethane
insulation. Magnetic door gaskets
are removable without tools and
one piece vinyl keyed into a thermal
breaker retainer frame.All door
openings have full perimeter
minimum-wattage anti-condensate
heaters behind the stainless steel
fascia to retard condensation. Doors
INTERIOR SHELVES
Two heavy-duty, adjustable removable
epoxy coated shelves are furnished for
each door section.Adjustable pilasters
available as standard on all models.
Features - All Undercounter Models
■ Stainless steel fronts, doors,
top, and exterior ends. Zinc
coated steel exterior bottom
and rear.
■ Special, extra rigid one-shot
high pressure foamed-in-place
polyurethane insulation.
Average thickness: 2".
■ Automatic defrost system.
■ Self-closing doors have con-
cealed hinge mechanism.
■ One piece
door pull,
safety
stops, and
stay open
feature.
■ Coved-corner construction
assures easy clean-up.
■ One piece removable
magnetic door gasket.
■ 6" adjustable legs with
non-marring feet.
■ 2 epoxy-coated, steel-wire
shelves per
opening
adjust in 1"
increments
and will not
chip, corrode, or rub off.
■ Heavy-duty stainless
steel shelf pilasters are
adjustable. No tools
required to accommodate
various size trays and pans.
■ Full perimeter minimal
wattage anti-condensate
heaters.
■ 6-foot long, 3-wire power
cord with 3-prong groundtype plug (115/60/1).
■ Doors on the single section
models are reversible and can
be quickly rehinged without
special tools (with additional
hardware). Hinged on the
right (facing cabinet) standard.
■ No floor drain or plumbing
connections required.
Sandwich/Salad Prep Units
■ Full access, combination stainless
steel telescoping box cover and
utility shelf.
■ 4" deep salad/condiment high
impact plastic pans included (1/6
size). Openings will accomodate
6" deep inserts (not provided).
■ Tops have foamed-in-place, high impact
non-conducting thermobarrier with raised
edge breaker frame.
■ Interior thermometer standard.
■ Removable/reversible synthetic cutting board.
Options
■ Stainless steel interior.
■ Stainless steel exterior back.
■ Door locks; individual cylinder type.
■ Swivel casters-
6" load height for 27" models;
3 . 7 5 " and 6"for 45" and 59" m o d e l s .
Loading...