Cleveland KEL-100 User Manual
Cleveland
™
P
roject ________________________________
Item __________________________________
Quantity _______________________________
F
CSI Section ____________________________
A
pproval _______________________________
D
ate __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
ELECTRIC KETTLES
TRI-LEG, ELECTRIC KETTLES
STATIONARY, “
2⁄3 STEAM JACKETED
(100, 150, 225, 300, or 375 LITERS)
Cleveland Standard Features
II
Self-contained, easily installed - needs only an electrical hook-up
II
Steam jacket filled with treated water, venting and/or refilling is
not required
II
Accurate, consistant solid state temperature controls (mechanical thermostate not as accurate) - less than ±1°C variance
(ideal for simmering). Operating temperature range from 145° 260°F (63°C - 127°C)
Control panel includes:
• LED indicator for heat cycle • LED indicator for low water
• Power ON/OFF switch • Adjustable temperature control dial
II
Water resistant controls, splash-proof construction
II
Re-inforced rolled rim design prevents damage to kettle rim,
eliminates "bar rim designs"
II
Welded-in heating elements, (holds vacuum better, won't leak
or loose water)
II
Easily cleaned: kettle and all exterior surfaces are of type 304
stainless steel with an #4 finish
II
Rear mounted easy access pressure gauge and pressure relief
valve to prevent tampering. Color coded easy to read pressure
gauge with "green" and "vent air zone"
II
50 psi steam jacket rating for higher cooking temperatures
II
50 psi safety valve
II
Solid state water level control (no sight glass gauge to break or leak)
II
Splash proof element cover with a double gasket seal
II
Faucet mounting bracket
II
2˝ diameter tangent draw-off valve with drain strainer
II
1 5/8˝ O.D. tri-leg supports with level adjustable feet for floor bolting
I
I
Spring-assisted, hinged, rotatable, domed stainless steel cover
II
Standard voltage is 208-240 volts, 60 Hz, 3-phase, 3-wire
II
Typical approvals include UL., CSA, CE, NSF and ASME
Options & Accessories
Ë Hot and Cold Water Faucet with Swing Spout (DPK)
Ë Type 316 Stainless Steel Kettle Liner for high acid food
products (316)
Ë Cooking Baskets and Tri-Basket Supports (BS and TBS)
Ë Kettle Accessory Kit (KAK) includes:
Ë Clean-up Brush (CB) Ë 36˝ Kettle Paddle (KP)
Ë 36˝ Kettle Whip (KW) Ë 36˝ Kettle Brush (KB)
Ë Draw-off Brush (DB) Ë 24 oz. Ladle (KL)
Ë Automatic Water Meter (GMF or LMF)
Ë Water Meter Stand (SWM)
Ë Lift-off Covers (CL)
Ë Drain Strainers (DS-)
Ë Measuring Strip (MS)
Ë Kettle Markings (KM)
SPLASH PROOF SERIES”
,
25, 40, 60, 80 or 100 GALLONS
, SELF-CONTAINED
MODELS: KEL-25 KEL-60
KEL-30 KEL-80
KEL-40 KEL-100
Short Form Specifications
Shall be CLEVELAND, Electric Kettle, Tri-leg mounted, self-contained, stationary, Model KEL - _____ gallons, 2⁄3 Steam Jacketed.
Type 304 Stainless Steel Kettle and Supports. Rated 50 psi with
Safety Valve; Permanently filled Steam Jacket. Spring-assisted
Domed Cover. (Provide 1.50˝ Freeboard above batches of rated
size.) Splash Proof Solid State Temperature (±1° C) and Safety
Control System in plug-in Module including L.E.D. indicators. Base
Mounted for Floor Bolting with three (3), tri-bolt flanges. 2˝ diameter
Tangent Draw-off Valve.
Ë Hot and cold or cold only Kettle Filler with 60˝ Hose
(DKF-K or SKF-K)
Ë Swing Funnels for drain (SF)
Ë Alternate Mounting Systems
Ë High Wattages and Special Voltages
Ë 3" diameter Tangent Draw-Off Valve w/Strainer (TD3)
Ë Heat Deflector Shield (HS001)
Ë Correctional Packages
Ë Insulated Outer Jacket (IOJ)
SECT. VIII PAGE 13
0609
RECOMMENDED
FLOOR SLOPE
1
" (26 mm) per 4' (1220 mm)
P
IPE DRAIN RECOMMENDED
min. valve size plus 1" (26 mm)
4" (102 mm)
RECOMMENDED
9/16"
14
mm
120º
TYP
1" (25
mm)
MAX. ADJUSTMENT
1
5/8" (42
m
m)
Ø
FLANGED FOOT DETAIL
7/16" (11
m
m)
Ø
3 HOLES ON
3 1/8" (80
mm)
Ø
B.C.D.
4 7/8"
124
Ø mm
H
C
DIMENSIONS
GALS./
LITERS ACDE FGH JKLMNOPQRS
25/ IN 21 36 3/4 21 7/8 34 13 7/8 60 3/4 17 7/8 29 7/8 5 1/4 11 1/4 9 3/4 7 1/2 26 3/4 4 5/8 20 15 1/2 22 3/8
100 mm 534 934 556 864 353 1544 455 759 134 286 248 191 680 118 508 394 569
30/ IN 24 38 24 7/8 37 15 5/8 65 1/4 20 7/8 28 3/4 6 3/4 12 3/4 11 1/2 9 1/4 29 3/4 4 5/8 20 1/4 18 1/8 25 3/8
115 mm 610 966 632 940 397 1658 531 731 172 324 299 293 756 118 515 461 645
40/ IN 26 40 29 1/8 40 15 1/8 69 1/2 22 7/8 30 3/4 7 3/4 13 3/4 11 8 3/4 34 4 5/8 21 3/4 19 7/8 28 5/8
150 mm 661 1016 740 1016 385 1766 582 782 197 350 280 223 864 118 553 505 728
60/ IN 29 1/2 43 33 44 14 5/8 75 3/4 26 3/8 34 1/4 9 1/2 15 1/2 10 1/2 8 1/4 37 7/8 5 1/8 27 1/2 22 7/8 32 1/2
225 mm 750 1093 839 1118 372 1925 670 870 242 394 267 210 963 131 699 582 826
80/ IN 33 43 1/2 36 5/8 47 13 79 1/2 29 7/8 37 3/4 11 1/4 17 1/4 9 6 3/4 41 1/2 5 1/8 29 3/8 25 7/8 35 7/8
300 mm 839 1105 931 1194 331 2020 759 959 286 439 229 172 1055 131 747 658 912
100/ IN 35 1/2 45 39 1/4 50 12 1/2 83 3/8 32 3/8 40 1/4 12 1/2 18 1/2 8 1/2 6 1/4 44 1/8 5 1/8 5 1/8 28 38 3/8
375 mm 902 1144 997 1270 318 2118 823 1023 318 470 216 159 1121 131 131 712 975
STANDARD WATTAGE
208V 240V 415V 480V
GALS. LITERS KW 1PH 3PH KW 1PH 3PH KW 1PH 3PH KW 1 PH 3PH
25 100 9.8 47.2 27.2 13.1 54.4 31.4 12.1 29.0 16.7 13.1 27.2 15.7
30 115 12.3 59.0 34.1 16.3 68.1 39.3 15.1 36.2 20.9 16.3 34.0 19.6
40 150 14.7 70.8 40.9 19.6 81.7 47.1 18.1 43.5 25.1 19.6 40.8 23.6
60 225 14.7 70.8 40.9 19.6 81.7 47.1 18.1 43.5 25.1 19.6 40.8 23.6
80 300 14.7 70.8 40.9 19.6 81.7 47.1 18.1 43.5 25.1 19.6 40.8 23.6
100 375 14.7 70.8 40.9 19.6 81.7 47.1 18.1 43.5 25.1 19.6 40.8 23.6
HIGH WATTAGE
GALS. LITERS KW 1PH 3PH KW 1PH 3PH KW 1PH 3PH KW 1 PH 3PH
25 100 14.7 70.8 40.9 19.6 81.7 47.1 18.1 43.5 25.1 19.6 40.8 23.6
30 115 19.6 NA 54.5 26.1 NA 62.9 24.1 58.0 33.5 26.1 54.4 31.4
40 150 24.5 NA 68.1 32.7 NA 78.6 30.1 72.5 41.8 32.7 68.1 39.3
60 225 29.4 NA 81.7 39.2 NA 94.3 36.2 87.0 50.2 39.2 81.7 47.1
80 300 29.4 NA 81.7 39.2 NA 94.3 36.2 87.0 50.2 39.2 81.7 47.1
100 375 29.4 NA 81.7 39.2 NA 94.3 36.2 87.0 50.2 39.2 81.7 47.1
AMPS AMPS AMPS AMPS AMPS AMPS AMPS AMPS
208V 240V 415V 480V
AMPS AMPS AMPS AMPS AMPS AMPS AMPS AMPS
Consult factory for other voltages.
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., NSF, CGA, CSA, ETL and others.
CAPACITIES:
•
(in 8 oz. servings, other sizes may be calculated)
25 Gallon / 100 liters ............400 servings
30 Gallon / 110 liters ............480 servings
40 Gallon / 150 liters ............640 servings
60 Gallon / 225 liters ............960 servings
80 Gallon / 300 liters ..........1280 servings
100 Gallon / 375 liters ..............1600 servings
SHIPPING
WEIGHT (LBS.)
KEL-25 = 230
KEL-30 = 264
KEL-40 = 289
KEL-60 = 361
KEL-80 = 400
KEL-100 = 430
WATER
3
⁄8˝ O.D. copper tube or
1
⁄2˝ N.P.T. pipe.
When ordered with
optional faucet.
CLEARANCE
RIGHT = 0
LEFT = 0
REAR = 0
Allow 12" minimum on
right side for servicing.
(NOT TO SCALE)
SECT. VIII PAGE 14
Litho in U.S.A.
0609
Loading...