Cleveland KDW-100 User Manual
Cleveland
™
P
roject ________________________________
Item __________________________________
Quantity _______________________________
F
CSI Section ____________________________
A
pproval _______________________________
D
ate __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
OPTIONS & ACCESSORIES
WALL MOUNT, DIRECT STEAM
2/3 STEAM JACKETED
25, 40, 60, 80 OR 100 GALLONS
STATIONARY OR TILTING (also MIXER KETTLES)
Cleveland Standard Features
II
Steam Control Kit includes: Steam Control Valve, Steam,
Trap, Condensate Strainer, Check Valve, Nipples and
Fittings, Factory Assembled and mounted on Kettle
II
Kettle and Console Wall Mounting of Type 304 Stainless
Steel with #4 Finish
II
Spring Assisted, Hinged, Domed,Stainless Steel Cover
II
50 psi Steam Jacket Rating, 35 psi for 100 Gallon Models
II
hot and Cold Water faucet with Swing Spout
II
Power Pour standard on 100 Gallon , Tilting Models
II
Tilting Mechanism, when furnished, has permanently
lubricated, self-locking, Worm Drive of space saving
design
II
1.50" diameter Tangent Draw-Off Valve with Strainer
II
High Capacity Pouring Lip on Tilting Models
II
Steam Jacket Condensate Drain Valve with insulated
handle
Options & Accessories
Ë Type 316 Stainless Steel Kettle Interior for high acid food
products (316)
Ë Steam Supply Moisture Separator/Trap (MS)
Ë Tri-Basket Supports (TBS)
Ë Measuring Strip
Ë Incremental Markings (KM)
Ë Power Tilting for 40, 60, and 80 Gallon Models (PT)
Ë Food Strainer (FS)
Ë Flow Diverter (FD)
Ë Steam Pressure Reducing Valve (PRV)
Ë Automatic Water Meter (GMF or LMF)
Ë Automatic Water Cooling (AWC-1)
MODELS:
KDW-25 KDW-80 KDW-25-T KDW-80-T
KDW-40 KDW-100 KDW-40-T KDW-100-T
KDW-60 KDW-60-T
Short Form Specifications
Shall be CLEVELand, Kettle, Wall Mount, (stationary or Tilting),
Direct Steam, Model KDW - _____- _____ ; _____ Gallons. 2/3 Steam
Jacketed, Type 304 Stainless Steel with 50 psi Steam Jacket rating. Support Consoles are Stainless Steel. Includes Spring
Assisted, Domed, Rotatable, Cover. 1.50" Tangent Draw-Off
Valve, Steam Condensate Trap and Strainer, Factory Assembled
and Installed. Hot and Cold or Cold only, Pantry Water Faucet
with Swing Spout. To Operate, connect directly to a steam source
supplying from 5 to 45 psi steam.
Ë
2" or 3" diameter Tangent Draw-Off Valve with Strainer (TD)
Ë Kettle Accessory Kit (KAK)
Ë 1 1/2", 2" or 3" diameter Dairy Valves (DV)
Ë Pan Carrier (PCK)
Ë Covers, other than standard (CHS)
Ë Swing Funnel (SF)
Ë In-Wall Carriers - see drawing on back of this page
(IWC-PDW)
SECT. XIII PAGE 7
0609
CAPACITIES: (in 8 oz. servings) (Other sizes may be
•
calculated)
25 Gallon / 95 liters ..... 400
40 Gallon / 150 liters ..... 640
60 Gallon / 225 liters ..... 940
80 Gallon / 300 liters ..... 1280
Many regional, state and local codes exist and it is
•
the responsibility of the owner and installer to comply with those codes.
leveland Range equipment is built to comply with
C
•
applicable standards for manufacturers. Included
among those approval agencies are: UL, A.G.A.,
NSF, ASME/N.Bd., CSA, CGA, ETL, and others.
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Installation of backflow preventers, vacuum breakers and other specific coder requirements is the responsibility of the owner and installer.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., A.G.A., NSF, ASME/N.Bd., CSA, CGA, ETL and others.
(NOT TO SCALE)
SECT. XIII PAGE 8
0609
Litho in U.S.A.
Loading...