Cleveland KDT-12-T User Manual
Cleveland
™
P
roject ________________________________
Item __________________________________
Quantity _______________________________
F
CSI Section ____________________________
A
pproval _______________________________
D
ate __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
MODULAR BASES
EQUIPMENT STAND WITH DRAIN
ENCLOSED; with LEGS, SLIDING DRAIN
CATCH PAN and SPLASH SHIELD
450, 650, 760, 1050, 1200, 1600 or 1800MM WIDE TABLE WITH DRAIN
Cleveland Standard Features
II
Type 430 Stainless Steel, welded construction, #4 finish
II
6" Stainless Steel legs with level adjustment
II
Full width drain trough with center drain outlet fitted with
standard male drain connection
II
Sliding drain catch pan with screened outlet and splash
shield
II
Enclosed cabinet-style base
II
Suitable for kettles, mixer kettles, skillets, etc.
II
18" height (450mm) matches "Low Boy" mounted
equipment
Options & Accessories
Ë Flanged feet (FF)
MODELS: SD-450 SD-1050 SD-1800
SD-650 SD-1200
SD-760 SD-1600
Short Form Specifications
Shall be CLEVELAND, equipment stand (with drain), adjustable legs 18"
high, with _____ mm wide table top. (Measured left to right.) Type 430
Stainless Steel construction with #4 finish. Full width drain trough, having
center outlet with standard male drain connection, sliding drain catch pan
with screened outlet.
SECT. VII PAGE 9
0609
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are UL, NSF and CSA.
(NOT TO SCALE)
SECT. VII PAGE 10
0609
Litho in U.S.A.
Loading...