Cleveland KDP-40-T, KDP-60-T Specifications
Cleveland
™
P
roject ________________________________
I
tem __________________________________
Quantity _______________________________
FCSI Section ____________________________
A
pproval _______________________________
D
ate __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
DIRECT STEAM KETTLES
PEDESTAL, DIRECT STEAM
TILTING, 2⁄3 STEAM JACKETED
25, 40 or 60 GALLONS (100, 150 or 225 LITERS)
Cleveland Standard Features
n Pedestal is Stainless Steel with
adjustable for sloping floors), comes with Stainless Steel
or sealing
Collar f
n Kettle and all exterior surfaces are 304 Stainless Steel for
ease of cleaning
n Tilting Mechanism with per
Worm Drive of space saving design
or chunky products
n Large Pour
n 50 psi Steam Jacketed Rating
n 50 psi chrome plated Safety Valve
n Condensate Drain Valve with insulated handle
n Steam Control Valve mounted on console
n Typical approvals include NSF and ASME
ing Lip f
Options & Accessories
p Type 316 Stainless Steel Kettle Liner for high acid food
products (316-G)
p Lift-off Covers (CL)
p Steam Control Kit includes: Steam Trap, Condensate Strainer,
Check Valve, nipples and fittings (SCK2)
ing-assisted Cover: domed, hinged, one-piece rotatable
p Spr
(CHS-)
ater Faucet, comes with Swing Spout and
ing Str
w-off Br
W
angent Draw-Off Valve (TD2 or TD3*), *TD3 for
T
i-Bask
r
ets and
T
ips (MS)
ush (DB)
alve for regulating incoming
V
p Hot and Cold
Mounting Bracket (DPK and FBKT)
p 2˝ or 3" diameter Tangent Draw-Off Valve (TD2 or TD3)
p
2˝ or 3" diameter
60 gallon only and will raise height of kettle by 5-5/8" (143mm)
p 3" diameter Butterfly Valve (BV3)
p Cooking Bask
(BS and TBS)
p Pan Carrier (PCK)
p Measur
p Gallon Markings (KM)
p Kettle Accessory Kit (KAK) includes:
p Clean-up Brush (CB) p 36˝ Kettle Paddle (KP)
p 36˝ Kettle Whip (KW) p 36˝ Kettle Brush (KB)
a
p Dr
p Faucet Mounting Bracket (FBKT)
p Swing Funnels for drain (SF)
p Pressure Reducing
steam pressure of over 45 psi (PRV-K)
3
⁄4˝ thick Floor Plate, (level
manently lubricated, self-locking,
et Suppor
p 24 oz.
ts
Ladle (KL)
MODELS: c KDP-25-T c KDP-60-T
c KDP-40-T
Shown with optional Spring-Assisted Cover,
2" Tangent Draw-Off Valve, and Double Pantry Faucet
t Form Specifications
Shor
Shall be CLEVELAND, Direct Steam Kettle, Pedestal mounted,
hand tilting, Model KDP - _____- T; ____gallons. 23 Steam Jacketed;
Type 304 Stainless Steel kettle and supports; 50 psi Steam Jacket
Rating; heavy re-enforced Rolled Rim. To operate, connect directly
to a steam source supplying from 5 to 45 psi of steam pressure.
p Hot and cold or cold only Kettle Filler with 60˝
Hose (DKF-K or SKF-K)
p Automatic Water Cooling* (AWC-1)
* requires Console Mounting Option
p Alternate Mounting Systems - Console Mounting
p Automatic Water Meter (GMF or LMF)
ater Meter Stand (SWM)
p W
p Food Strainers (FS)
p Flow Diverter (FD)
ainers (DS-)
ain Str
p Dr
p Heat Deflector Shield (HS001)
SECT. X PAGE 13
0707
CAPACITIES: (in 8 oz. servings,
other sizes may be calculated.)
25 Gallon / 100 liters . . . 400 servings
40 Gallon / 150 liters . . . 640 servings
60 Gallon / 225 liters . . . 960 servings
NOTE: TD3, 3" tangent draw off will
raise height of kettle by 5-5/8" (143mm).
Available on 60 gallon models only.
43.00
1093
43.00
1093
47.00
1194
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Installation of backflow preventers, vacuum breakers and other specific coder requirements is the responsibility of the owner and installer.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., A.G.A., NSF, ASME/N.Bd., CSA, CGA, ETL and others.
SECT
(NO
.
O SCALE)
T
T
GE
A
X P
14
0707
Litho in U.S.A.
Loading...