Cleveland EST-28 User Manual
Cleveland
™
P
roject ________________________________
Item __________________________________
Quantity _______________________________
F
CSI Section ____________________________
A
pproval _______________________________
D
ate __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
MODULAR BASES
EQUIPMENT STANDS
28" OPEN TYPE STAND
REMOVABLE DRAIN DRAWER with SPLASH SHIELD
ALL STAINLESS STEEL
Cleveland Standard Features
II
All Stainless Steel construction with 1 1/4" square tubing
II
Adjustable Feet (rear feet are flanged for Floor Bolting)
II
Removable combination Drain Drawer (with Splash Shield)
and Pan Support
II
Ideal for mounting table type kettles, mixer kettles and
skillets (models KET-3-T, KET-6-T, KET-12-T, KDT-3-T*,
KDT-6-T*, KDT-12-T*, KDT-20-T*, MKET-12-T, MKDT-12-T,
SET-15, SET-10).
*Requires Direct Steam Adaptor Top accessory
Options & Accessories
Ë Direct Steam Adaptor Top (AK)
28" OPEN TYPE ECONOMY STAND
ALL STAINLESS STEEL
MODEL: ST-28
Short Form Specifications
Shall be CLEVELAND, Open Type Equipment Stand with removable Drain Drawer, Splash Shield and Adaptor Top (optional),
Model ST-28. All Stainless Steel construction with 11⁄4" square tubing. Furnished with Level Adjustable Feet (rear feet are flanged for
Floor Bolting).
MODEL: EST-28
Cleveland Standard Features
II
All Stainless Steel construction with 1 1/4" square tubing
II
Adjustable Feet (rear feet are flanged for Floor Bolting)
II
Ideal for mounting table type kettles, mixer kettles and
skillets (models KET-3-T, KET-6-T, KET-12-T, KDT-3-T*,
KDT-6-T*, KDT-12-T*, KDT-20-T*, MKET-12-T, MKDT-12-T,
SET-15, SET-10).
*Requires Direct Steam Adaptor Top accessory
Options & Accessories
Ë Direct Steam Adaptor Top (AK)
Short Form Specifications
Shall be CLEVELAND, Open Type Equipment Stand with Adaptor
Top (optional), Model EST-28. All Stainless Steel construction with
11⁄4" square tubing. Furnished with Level Adjustable Feet (rear feet
are flanged for Floor Bolting).
SECT. VII PAGE 11
0609
7 5/8"
19 1/2"
4
"
21 3/8"
(Drawer Fully Closed)
40 1/4"
(Drawer Fully Extended)
26 7/8"
1
7 5/8"
2
5 1/8"
2
5/8"
5 3/8"
20 3/4"
2
8 1/8"
1 1/4" NPT DRAIN
PAN NIPPLE
D
RAIN
P
AN
R
EAR VIEW / DRAIN PAN DETAIL
39 3/16"
39 11/16"
45 1/16"
35 11/16"
49 13/16"
42 15/16"
53 5/8"
46 1/8"
51 3/4"
37 13/16"
52 3/16"
38 5/16"
48"
41 1/4"
53 3/4"
44 15/16"
46 3/16"
37 5/8"
REAR CLEARANCE - 2" MIN REAR CLEARANCE - 4 1/2" MIN REAR CLEARANCE - 2 1/2" MIN
RIGHT SIDE CLEARANCE - 6" MIN
REAR CLEARANCE - 2 1/2" MIN
RIGHT SIDE CLEARANCE - 6" MIN
REAR CLEARANCE - 0" REAR CLEARANCE - 0" REAR CLEARANCE - 0" REAR CLEARANCE - 2" MIN
REAR CLEARANCE - 0"
KDT-3-T
DIRECT STEAM
ADAPTOR TOP
REQUIRED (AK)
KGT-6-T
KET-3-T
KDT-6-T
DIRECT STEAM
ADAPTOR TOP
REQUIRED (AK)
KGT-12-T
KDT-12-T
DIRECT STEAM
ADAPTOR TOP
REQUIRED (AK)
KDT-20-T
DIRECT STEAM
ADAPTOR TOP
REQUIRED (AK)
SET-10 SET-15
(1 only)
50 3/16"
42 7/16"
REAR CLEARANCE - 0"
REAR CLEARANCE - 1" MIN
KET-12-T
45 7/8"
40 3/8"
REAR CLEARANCE - 0"
KET-6-T
MOUNTING OPTIONS (SELECT ANY ONE UNITS PER STAND)
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Installations of Back Flow Preventers, Vacuum Breakers and other specific code requirements are the responsibility of the Owner and Installer.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., NSF, CGA, CSA, ETL and others.
SECT. VII PAGE 12
(NOT TO SCALE)
0609
Litho in U.S.A.
Loading...