Cleveland CAS-15, CAS-20, CAS-5, CAS-7.5 Specifications

Cleveland

™

P

roject ________________________________

Item __________________________________

Quantity _______________________________

F

CSI Section ____________________________

A

pproval _______________________________

D

ate __________________________________

1333 East 179 St.,

Cleveland, Ohio, U.S.A. 44110

Tel: [phone]

Fax: [phone]

Web Site: www.ClevelandRange.com

Email: [e-mail]

COOK CHILL SYSTEMS

COMPRESSED AIR SYSTEMS
& REFRIGERATED AIR DRYERS

Cook/Chill Systems

COMPRESSED AIR SYSTEMS

Cleveland Standard Features

I Air Compressor mounted on A.S.M.E. rated Receiver Tank
I Baldor high efficiency Motor
I Magnetic Starter with Thermal Overloads, completely wired

and mounted

I Balanced Pump, external and internal
I Cast Iron Cylinders
I Forged Crankshaft and Pistons
I High quality cast iron Piston Rings
I Cast aluminum Finned Inner Coolers
I Inner Cooler Safety Valve
I Manual Drain for Air Receiver Tank
I Automatic Start and Stop Control
I 14 gauge Belt Guard
I 1/2" Combination Filter/Pressure Regulator/Guage
I 80 gallon Receiver Tank for CAS-5 & CAS-7.5
I 120 gallon Receiver Tank for CAS-10, CAS-15 & CAS-20

I Accepted for use in U.S.D.A. Inspected Facilities

Options & Accessories

Ë Vibration Isolation Pads (set of four)
Ë 3/4" Diameter Stainless Steel Flex Hose
Ë Refrigerated Air Dryer with 37˚F Dew Point
Ë Programmable, Automatic Drain Valve for Receiver Tank
Ë Larger models availabe on request

REFRIGERATED AIR DRYERS

MODELS:



CAS-5 (VERTICAL)



CAS-7.5 (VERTICAL)



CAS-10 (HORIZONTAL)



CAS-15 (HORIZONTAL)



CAS-20 (HORIZONTAL)

CAS-7.5

CAS-10

Short Form Specifications

Shall be CLEVELAND Model CAS-_____, COMPRESSED
AIR SYSTEM, consisting of Air Compressor & Receiver
Tank, ___ H.P. (horse power); High efficiency Baldor Motor
with magnetic Starter, Automatic Start and Stop Control;
balanced External and Internal Pump; 14 gauge Steel; Belt
Guard; 1/2" combination Filter / Pressure Regulator;

____ gallon Receiver Tank.

MODELS:



CAS-ADA-25



CAS-ADA-40



CAS-ADA-60



CAS-ADA-80

Cleveland Standard Features

I Non-Cycling Dryer with double pass flooded Evaporator
I Rated at 37°F (+20°F) Pressure Dew Point
I High efficiency Shell and Tube designed Heat Exchangers

for Compact Unit size and weight

I Low and High Refrigerant protection with Automatic

Shut-Down Device

I Internal Thermal Overload Protection
I Float operated Drain Valve
I Power “on/off” Switch with Control Light
I Low ambient Fan Control
I Air cooled, compact design, cabinet type
I Electrical Supply Cord
I Designed for wallmounting

I Accepted for use in U.S.D.A. Inspected Facilities

Shall be CLEVELAND Model CAS-AD__, _____, REFRIGERATED
AIR DRYER for Series “CAS” Compressed Air Systems. Rated at

°

F (+20°F) Pressure Dew Point; Air cooled cabinet type; com-

37
pact design with Shell and Tube Heat Exchanger; Automatic High
and Low Pressure Shut-Down device; Thermal Overload
Protection; Non-Cycling Dryer with double pass flooded
Evaporator; low ambient Fan Control; Float operated Drain Valve.

Short Form Specifications

SECT. XIV PAGE 55

0907

AIR FLOW AIR FLOW

P

LAN VIEW

C

A

B

AIR OUTLET

AIR INLET

DRAIN (D)

FRONT VIEW

BACK VIEW

C

ORD

& PLUG

ADA-25

(for CAS-5)

F

RONT VIEW

CORD

& PLUG

REAR VIEW

18"

1

9"

A

IR OUTLET

A

IR INLET

1

8"

D

RAIN (D)

PLAN VIEW

D

A

BYPASS

BYPASS

AIR DRYER AND/OR

AFTERCOOLER

LINE FILTER

C

OMPRESSED AIR SYSTEM AND AIR DRYER

R

ECOMMENDED PIPING DIAGRAM

D

B

A

C

PLAN VIEW

C

CAS-10, CAS-15 & CAS-20

CAS-5 & CAS-7.5

E

A

E

B

D

A

PD

1

6.5”

20”

42”

16.5”

A

A

A

A

A

P

LAN VIEW

6

9"

APD (AUTO PROGRAMMABLE
DRAIN "OPTIONAL")

FRONT VIEW

F

RONT VIEW

120V/1PH - 5 AMPS

ADA-40 for CAS-7.5 & CAS-10

ADA-60 for CAS-15
ADA-80 for CAS-20

(for floor or shelf mounting only)

A B C
ADA-40 28 30 20
ADA-60 28 40 18
A

DA-80 28 40 18

DIMENSIONS

D

1 D 2

B

D

1 D 2

B

D

1 D 2

B

D

1 D 2

B

D

1 D 2

B

D

1 D 2

B

AIR COMPRESSOR

MODELS ABCDEAT 100 PSIG OUTLET DRAIN ELECTRICAL

CAS-5 37" 74" 26" 40 1/2" - 19 CFM 2" NPT 1" NPT 15 AMPS
CAS-7.5 37" 79" 26" 40 1/2" - 26 CFM 2" NPT 1" NPT 22 AMPS
CAS-10 69" 55" 30" 16" 13 1/2" 40 CFM 2" NPT 1" NPT 28.5 AMPS
CAS-15 69" 55" 30" 16" 13 1/2" 47.3 CFM 2" NPT 1" NPT 48.3 AMPS
CAS-20 69" 55" 30" 16" 13 1/2" 58.4 CFM 2" NPT 1" NPT 62.1 AMPS

REFRIGERATED AIR DRYER 120/1PH

MODELS AIR DRAIN CORD & PLUG FLOW WEIGHT

ADA-25 (for CAS-5) 1/2" 1/4" 1/4 HP – 10 AMPS 25 SCFM 85 LBS
ADA-40 (for CAS-7.5 & CAS-10) 1/2" 1/4" 1/3 HP – 7.5 AMPS 40 SCFM 128 LBS
ADA-60 (for CAS-15) 1" 1/4" 1/2 HP – 10 AMPS 60 SCFM 183 LBS
ADA-80 (for CAS-20) 1" 1/4" 3/4 HP – 15 AMPS 80 SCFM 194 LBS

Cleveland Range reserves right of design improvement or modification, as warranted.

CAPACITY AIR 208/3PH

ELECTRICAL AIR SHIPPING

(NOT TO SCALE)

SECT. XIV PAGE 56

Litho in USA

0907