Cleveland CAS-10 User Manual
Cleveland
™
P
roject ________________________________
Item __________________________________
Quantity _______________________________
F
CSI Section ____________________________
A
pproval _______________________________
D
ate __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
COOK CHILL SYSTEMS
COMPRESSED AIR SYSTEMS
& REFRIGERATED AIR DRYERS
Cook/Chill Systems
COMPRESSED AIR SYSTEMS
Cleveland Standard Features
I Air Compressor mounted on A.S.M.E. rated Receiver Tank
I Baldor high efficiency Motor
I Magnetic Starter with Thermal Overloads, completely wired
and mounted
I Balanced Pump, external and internal
I Cast Iron Cylinders
I Forged Crankshaft and Pistons
I High quality cast iron Piston Rings
I Cast aluminum Finned Inner Coolers
I Inner Cooler Safety Valve
I Manual Drain for Air Receiver Tank
I Automatic Start and Stop Control
I 14 gauge Belt Guard
I 1/2" Combination Filter/Pressure Regulator/Guage
I 80 gallon Receiver Tank for CAS-5 & CAS-7.5
I 120 gallon Receiver Tank for CAS-10, CAS-15 & CAS-20
I Accepted for use in U.S.D.A. Inspected Facilities
Options & Accessories
Ë Vibration Isolation Pads (set of four)
Ë 3/4" Diameter Stainless Steel Flex Hose
Ë Refrigerated Air Dryer with 37˚F Dew Point
Ë Programmable, Automatic Drain Valve for Receiver Tank
Ë Larger models availabe on request
REFRIGERATED AIR DRYERS
Cleveland Standard Features
MODELS:
CAS-5 (VERTICAL)
CAS-7.5 (VERTICAL)
CAS-10 (HORIZONTAL)
CAS-15 (HORIZONTAL)
CAS-20 (HORIZONTAL)
CAS-7.5
CAS-10
Short Form Specifications
Shall be CLEVELAND Model CAS-_____, COMPRESSED
AIR SYSTEM, consisting of Air Compressor & Receiver
Tank, ___ H.P. (horse power); High efficiency Baldor Motor
with magnetic Starter, Automatic Start and Stop Control;
balanced External and Internal Pump; 14 gauge Steel; Belt
Guard; 1/2" combination Filter / Pressure Regulator;
____ gallon Receiver Tank.
MODELS:
CAS-AHT-20
(for CAS-5)
CAS-AHT-30
(for CAS-7.5)
CAS-AHT-40
(for CAS-10)
CAS-AHT-50
(for CAS-15)
CAS-AHT-75
(for CAS-20)
I Refrigerated air dryer for high inlet temperature
I Unique aluminum technology heat exchanger design
I Precise pressure dew point control over full operating range
I Solid State Controller
I Integrated after-cooler and 3-micron filter / separator
I Dual timed electronic drains with isolation valve and strainer
I Illuminated ON/OFF switch
I Drain set and push to test buttons
I Hot gas by-pass capillary tube controls
I R-134a refrigerant for environmentally friendly applications
Short Form Specifications
Shall be Cleveland Model CAS-AHT _____, Refrigerated Air Dryer
for Series “CAS” Compressed Air Systems; precise pressure dew
point control over full operating range; dual, programmable electronic timer drains; integrated after-cooler and 3-micron filter /
separator; “ACT” aluminum cooling technology for efficient heat
transfer, reduced energy consumption and low pressure drop.
SECT. XIV PAGE 47
0609
COMPRESSED AIR SYSTEM AND AIR
DRYER RECOMMENDED
PIPING DIAGRAM
D
B
A
C
PLAN VIEW
C
CAS-10, CAS-15 & CAS-20
C
AS-AHT-20, 30, 40 & 50
CAS-AHT-75
CAS-5 & CAS-7.5
E
A
E
B
D
APD
1
6.5”
20”
42”
16.5”
A
A
A
A
A
P
LAN VIEW
69"
1
6.38"
16.00"
1
8.38”
44.50"
3.50"
15.88"
26.63"
19.88"
2
5.38"
1
6.75"
2.60"
2.25"
APD (AUTO PROGRAMMABLE
DRAIN "OPTIONAL")
F
RONT VIEW
F
RONT VIEW
120V/1PH - 5 AMPS
D
D
RAINS
D
DRAINS
D
rain: Each dryer comes fitted with
flexible plastics tubing (1/4"dia. x 60”L).
A
A
AIR IN
A
IR OUT
Air Compressor
By-Pass Group
AHT Dryer
Compressed Air Tank
Filter (supplied by installer)
Condensate Drain
IN
O
UT
1
2
2
1
3
4
5
4
5
6
6
6
6
6
3
40”
40”
40”
40”
Clearance:
Leave at least 40” of free
s
pace on every side of
the drier for ventilation
purposes and maintenance
operations.
A
IR OUT
AIR IN
A
A
D
1 D 2
B
D
1 D 2
B
D
1 D 2
B
D
D
1 D 2
B
D
1 D 2
B
AIR COMPRESSOR
MODELS ABCDEAT 100 PSIG OUTLET DRAIN 208/3/60
CAS-5 37" 74" 26" 40 1/2" - 19 CFM 2" NPT 1" NPT 15 AMPS
CAS-7.5 37" 79" 26" 40 1/2" - 26 CFM 2" NPT 1" NPT 22 AMPS
CAS-10 69" 55" 30" 16" 13 1/2" 40 CFM 2" NPT 1" NPT 28.5 AMPS
CAS-15 69" 55" 30" 16" 13 1/2" 47.3 CFM 2" NPT 1" NPT 48.3 AMPS
CAS-20 69" 55" 30" 16" 13 1/2" 58.4 CFM 2" NPT 1" NPT 62.1 AMPS
REFRIGERATED AIR DRYER
MODELS AIR FLOW ELEMENT REFRIGERANT TUBING AMPS WEIGHT
CAS-AHT-20 (for CAS-5) 1/2" NPT-F 20 SCFM TP30 R-134a 1/4" 2.7 86 LBS
CAS-AHT-30 (for CAS-7.5) 1/2" NPT-F 30 SCFM TP30 R-134a 1/4" 3.0 94 LBS
CAS-AHT-40 (for CAS-10) 1/2" NPT-F 30 SCFM TP30 R-134a 1/4" 3.9 96 LBS
CAS-AHT-50 (for CAS-15) 1/2" NPT-F 50 SCFM TP45 R-134a 1/4" 5.1 97 LBS
CAS-AHT-75 (for CAS- 20) 1" NPT-F 75 SCFM TP125 R-134a 1/4" 8.9 111 LBS
*Comes standard with Cord & Plug
Cleveland Range reserves right of design improvement or modification, as warranted.
REPLACEMENT DRAIN ELECTRICAL
CAPACITY AIR ELECTRICAL
AIR FILTER FLEXIBLE 115/1/60* SHIPPING
(NOT TO SCALE)
SECT. XIV PAGE 48
0609
Litho in USA
Loading...