ClearSpan 105757, 105759, 105758 Installation Instructions Manual
Frame Kit 105757, 105758 and 105759
Installation Instructions
Thank you for purchasing this ClearSpan™ frame kit.
These instructions include helpful hints and important
information needed to safely assemble and attach the
kit. Please read these instructions before you begin.
SAFETY PRECAUTIONS
Wear eye protection.
•
Wear gloves when handling metal tubes.
•
Use a portable GFCI when working with power tools
•
and cords.
The following list identifies the main tools needed to assemble and attach the kit components. Additional tools and
supports may be needed depending on the shelter and application.
Wrench, ratchet and socket (recommended)
•
Hammer and gloves
•
ASSEMBLE THE FRAME KIT
You will need the following parts:
1" Frame Support Pipe (length determined by
•
shelter)
WARNING: Identify whether underground cables
and/or pipes are present before installing the frame
kit ground stakes. Do not attempt to install the
frame kit during windy or stormy days.
ATTENTION: The Frame Kits for the 9' and 12'
tall storage bags and shelters include additional
16' straps (with ratchets) to use in place of the 10'
straps included with the anchor kits. The 10' straps
can be used as needed for other applications.
FALB02B
Nut
FA2071
Eyebolt
FA2071 Eyebolts
•
105575 Star Nuts for 1" Pipe
•
FAMF03B Fender Washers
•
FALB02B Nuts
•
1.
Take a 1" diameter plain pipe and install one (1) star nut (#105575) in one end of the pipe. Use a hammer to tap
the star nut into the pipe end. Do not use a tool that can damage the threads in the center of the star nut.
#105575
FAMF03B
Fender Washer
Visit www.ClearSpan.com for additional products and customer assistance.
1
ASSEMBLE THE FRAME KIT (CONTINUED)
Locate the eyebolts, fender washers, and nuts and
2.
assemble each as shown below.
ATTACH EYEBOLT ASSEMBLIES
Take one eyebolt assembly and attach it to the
1.
storage bag (or shelter).
FA2071
Eyebolt
FALB02B Nut
FAMF03B
Fender Washer
NOTE: The remaining nuts and washers are used
when the eyebolt assemblies are attached to the
storage bag (or shelter).
Set the pipes and eyebolt assemblies in an
3.
accessible place and continue by placing the storage
bag (or shelter) in the desired location.
Continue by attaching the eyebolt assemblies and
4.
frame support pipes to the storage bag (or shelter).
Eyebolt
Corner of
shelter
Fender
Washer
Nut
Nut
Fender
Washer
Repeat Step 1 and attach all remaining eyebolt
2.
assemblies to the storage bag (or shelter).
Visit www.ClearSpan.com for additional products and customer assistance.
2
Diagram may show
shelter of a similar
design
Loading...