ClearOne comm Pro 880TA User Manual

CONVERGE PRO
DATA SHEET <
New!
ConvergeTM Pro | 880TA
Digital Matrix Mixer with Four Channel Power Amplifier
THE INTELLIGENT CHOICE FOR PROFESSIONAL AUDIO CONFERENCING
APPLICATIONS
Boardrooms
Training Centers
Municipal Rooms
Courtrooms
Houses of Worship
Telemedicine
Presentation Systems
Zoned Paging
Masking Systems
ADVANTAGES
Advanced Feature Set
Next-generation Acoustical Echo Cancellation +
Full bandwidth (20Hz to 22KHz) echo cancellation > Improved duplex performance > Push-to-talk microphone compatibility >
Next-generation Noise Cancellation +
Increased resolution on Microphone Preamp stage +
0-56 dB in 7 dB increments >
Management Improvements +
Integrated Ethernet and USB connections > SNMP and HTML remote management > Event scheduler > Diagnostic console >
Simplified Configuration Software +
Drag & drop A/V and channel objects > Selectable views—unit, matrix, channel >
Expanded Serial Command List +
Superior Audio Performance
D.A.R.E™ (Dynamic Automatic Resonance Elimination) for control of feedback + Next-generation Distributed Echo Cancellation® on every mic input + First-mic priority delivers clear audio to the far end + 20 Hz-22 kHz bandwidth for full-range audio response + ALC & AGC keep participants’ audio balanced and consistent +
Configuration Flexibility
Four built-in 35 Watt amplifiers, 8Ω or 70V/100V + Up to 96 microphones + Link multiple Converge/Converge Pro units (Converge Pro 880, 880T, 880TA, 840T, 8i, TH20, +
Converge SR 1212 and SR 1212A) for extensive microphone coverage and up to 16 phone
lines Enhanced expansion bus, featuring 18 mix-minus audio buses for routing between units + Ten mic gating groups (four internal & six global) allow separation of mics into individual + mixer gating groups for greater configuration flexibility 32 presets can be executed on-the-fly without disturbing other ongoing preset operations + 255 Macros for customized audio control/configuration with single command execution + No space required between rack mounted units +
> CONVERGE PRO 880TA BACK PANEL
> SPECIFICATIONS
CONVERGE PRO 880TA DATA SHEET <
Audio Performance
Conditions: Unless otherwise specified, all measurements are performed from 20 Hz to 22 kHz BW limit (no weighting) Frequency Response: 20 Hz to 22 kHz +/- 1 dB Noise (EIN): -126 dBu, 20 kHz BW, max gain
Rs= 150Ω
THD+ Noise: <0.02% Dynamic Range: >105 dB (non A weighted) Crosstalk: <-91 dB re 20 dBu full band.
Mic/Line Inputs 1-8
Push-on mini-terminal block, balanced, bridging
Impedance: > 5 KΩ
Nominal Level: adjustable -56 dBu to 0 dBu (7dB step coarse gain adjustment) Maximum Level: -65 to +20 dBu Phantom Power: 24V, selectable
Line Inputs 9-12
Push-on mini-terminal block, balanced, bridging
Impedance: > 5 KΩ
Nominal Level: 0 dBu Maximum Level: 20 dBu
Output 1-8
Push-on mini-terminal block, balanced, bridging
Impedance: < 50 Ω
Nominal Level: 0 dBu Maximum Level: 20 dBu
Auto Mixer Parameters
Number of Open Microphones (NOM) PA Adaptive Mode First Mic Priority Mode Maximum # of Mics Ambient Level Gate Threshold Adjust Off Attenuation Adjust Hold Time Decay Rate Chairman Override 96 Total Microphones per site 6- Global Gating Groups 4- Internal Gating Groups
Matrix Mixing Parameters
8- Microphone Analog Inputs 4- Analog Line Inputs 8- Analog Line Outputs 4- Power Amplifier Outputs 18- Expansion Bus in/out 8- Assignable Processing Blocks in/out 1- Telco in/out
Assignable Processing Blocks
Filters
All Pass Low Pass High Pass Low shelving High shelving PEQ Notch Crossovers CD Horn
Compressor
Delay: adjustable up to 250 ms
Power Amplifier Output Processing
FeedBack Elimination w/ring cancellation 10-band EQ filter 4-node filter bank for Crossover Delay Block Compressor/Limiter Noise Gate for Hiss Control Sound Masking Generator per channel Adaptive Volume Control Multi Channel Control
Microphone Processing
4-node filter bank AGC/ALC Wideband AEC with NLP Tail-time: 130 msec Noise Cancellation
Power Amplifiers
Channels: 4
Amplifier Output: 4x35 Watts into 8Ω Impedance: Selectable 8Ω, 70V, 100V
THD + Noise: <0.2% (1/3 Power) Crosstalk: <-68 dB
Telco Line Port
RJ-11 POTS (plain old telephone service) or analog PBX extension A-lead supervision provided
Telephone Audio Performance
Conditions: Unless otherwise specified, all measurements are performed with ALC disabled, referenced @ -15dBm on/off telephone line Frequency Response: 250 Hz to 3.3 kHz +/-1 dB THD+N: <0.3% kHz SNR: > 62 dB
Telephone Processing
LEC: 31 msec tail-time Null: >55 dB Noise Cancellation: 6-15 dB ALC
Expansion Bus
Connection: CAT 5, RJ45 Mix Minus Structure 18 Audio Buses 6 Gating Buses 8 Reference Buses
Network
10/100 Auto Switching (PC and Network Port) HTTP Server Telnet Client SNMP Agent SMTP Client DNS DHCP
RS-232
DB-9
9.6k – 115k baud 8/1/0 Hardware Flow Control
USB
Version 2.0 compatible Type: B-connector
GPIO
DB 25 female (A/B) Inputs: Active Low Outputs: Open Collector, 40Vdc, 40 mA
Power
100-240VAC; 50/60 Hz, 300 Watts (maximum) Idle: 139 BTU/hr Full Load: 779 BTU/hr Efficiency: >80%
Humidity
15 to 80%
Mechanical
Dimensions: 2RU Weight: < 30 lbs.
Environmental
Operating temperature: 32-122 degrees F
Compliance
FCC Industry Canada CE RoHS Class 2 Wiring Required
Part Number
910-151-882 Converge Pro 880TA
Telco Set Port
> CLEARONE LOCATIONS
Headquarters: Salt Lake City, UT USA
5225 Wiley Post Way Suite 500 Salt Lake City, UT 84116 Tel: 801-975-7200 Toll Free: 800-945-7730 Fax: 801-977-0087 sales@clearone.com
Other product names may be registered trademarks of their respective owners who do not necessarily endorse ClearOne or ClearOne’s products. All rights reserved. Information in this document subject to change without notice. © 2009 ClearOne Communications Inc. 802-151-882-DS Revision 1.42 March 2009.
Latin America
Tel: 801-974-3621
global@clearone.com
Pass-though RJ-11 analog jack
EMEA
Tel: 44 (0) 1189 036 053
global@clearone.com
APAC
Tel: 801-303-3388
global@clearone.com
Loading...