Page 1
CONVERGE® Pro 2
Professional Audio DSP Platform
CONVERGE Pro 2 is the industry’s most advanced
professional audio DSP platform for conferencing
and sound reinforcement applications. It out-
performs in any size room, any audio environment,
any application.
CONVERGE Pro 2 is optimized to work with the
new Beamforming Mic Array 2 and DIALOG® 20
2-Channel Wireless Microphone System through
its native connection.
Powerful Architecture
+ 12 Mic/Line inputs with AEC
+ Built-in VoIP – 2 lines +3 lines (license)
+ Built-in Telco with ClearEffect™ processing
+ Built-in USB for PC-based conferencing
+ Built-in Dante for networked audio
+ Reduced footprint and power consumption
Scalable Connectivity
+ Standalone and daisy-chained system
+ Stack up units up to 96 Mic/Line inputs
+ Expansion bus “C-Link” with 64 channels
+ “P-Link” bus to connect 6 peripherals
Audio Signal Processing
+ Next-gen Acoustic Echo Cancellation processing
+ Distributed Echo Cancellation® on every mic input
+ Noise Cancellation with Adaptive-Ambience
+ Acoustic Intelligence with faster convergence
+ DARE™ feedback elimination
+ Advanced microphone gating
Any Application
+ VoIP/POTS conferencing
+ PC-based conferencing & Unified Communications
+ Sound Reinforcement applications
+ DanteTM for audio networking
Flexible Control OptionsConfiguration & Management
VENUES
Boardrooms
Conference Rooms
Huddle Rooms
Training Rooms
Lecture Halls
+ New CONSOLE® software
+ Auto-discovery of devices
+ Matrix View for entire system
+ FlowView™ for visualized audio signal paths
+ System monitoring and troubleshooting
+ Dialer app for Windows, Mac, iOS, Android
+ Tabletop controller with touch panel
+ Wall controller with buttons
+ Web based controller
+ 3rd party control modules
Courtrooms
Auditoriums
Telemedicine Facilities
Page 2
CONVERGE Pro 2 128TD Front Panel
CONVERGE Pro 2 128TD Back Panel
CONVERGE Pro 2
1 2 3 4
5 6 7 8
1 2 3 4 5 6
7 8 9 10 11 12
+5V 1 2 3 4
GPIO
SecPri RS-232 P-Link Out
C-Link InP-Link PoE
C-Link Out
Telco
Conferencing Sound Reinforcement
CONVERGE Pro 2
System
Mic/Line inputs 12 12 12 12 12 12 12 4 12 12
Mic/Line outputs 8 8 8 8 8 8 — 8 8 8
AEC
C-link expansion bus
P-link peripheral bus
USB audio interface
Ethernet, RS-232, GPIO interface
Applications
Built-in USB for PC-based conferencing
Built-in Telco for teleconferencing
128 128D 128T 128TD 128V 128VD 120 48T 128SR 128SRD
Built-in VoIP for VoIP conferencing
Sound Reinforcement applications
Built-in Dante for audio networking
Peripheral Devices
Beamforming Mic Array 2
DIALOG® 20 - Wireless Mic System
Configuration, Management & Control
New CONSOLE® software
Dialer app - Win, Mac, iOS, Android
Tabletop controller (available soon)
Wall controller (available soon)
Third-party control modules (available
soon)
Page 3
Functional Specifications
Unless otherwise specified, all measurements are performed with a 20Hz to 22kHz BW (no-weighting).
Specifications are applicable based on the SKU types.
MIC/LINE INPUTS & OUTPUTS
Inputs: Balanced audio inputs, 3.81mm Orange color
Phoenix/Euroblock type male header, Push-on
mini-terminal block
Outputs: Balanced audio outputs, 3.81mm Black color
Phoenix/Euroblock type male header, Push-on
mini-terminal block
Frequency Response:
20Hz – 22kHz @ +4dBu, +/- 0.5dBu
EIN (Equivalent Input Noise):
20kHz BW, max gain, Rs = 150Ω, -126dBu
THD + N (Total Harmonic Distortion + Noise):
20Hz – 22kHz @ +4dBu, line level, 0.006%
20Hz – 22kHz @ -56dBu, mic level, <0.04%
Dynamic Range:
20Hz – 20kHz @ 0dB, >105dB
Crosstalk (Mic/Line):
Channel to Channel,
stimulus at 20dBu to receptor at -56dBu, 1kHz, < -98dB
Input Impedance:
Balanced (line to ground), 2.2kΩ, 1%
Nominal Input Level:
Adjustable -56dB to 0dB, 7dB step coarse gain
Maximum Input Level: -65dBu to 20dBu
Phantom Power: 48V, Impedance 6.81kΩ
Output Impedance:
Balanced (line to ground), 95Ω, 1%
Output Level:
0dBu (Nominal), 20dBu (Max), -40dBu (Selectable)
USB AUDIO
Port Type: USB-B connector
Audio: Digital Audio, 2 x 2 bidirectional channels
Sample Rate: 48kHz
Sample Bit Depth: 24-Bit
Compatible:
USB 2.0
USB 3.0
TELEPHONE
Port Type: RJ11
Frequency Response:
1. Mic/Line Input to Telephone Out:
250Hz – 3.4kHz , +/- 2dB, 4dBu
2. Telephone In to Mic/Line Out:
250Hz – 3.4kHz, +/- 2dB, -15dBu
THD + N:
1. Mic/Line Input to Telephone Out: <0.1% @ 4dBu
2. Telephone In to Mic/Line Out: <0.3% @ -15dBu
Dynamic Range:
1. Mic/Line Input to Telephone Out: >67dBu
2. Telephone In to Mic/Line Out: >87dBu
REN: Ringer Equivalent Number 0.2
Transhybrid Balance: 30dB (1kHz, all AC terminations)
VOIP
Port Type:
RJ-45, 10/100Mbps Ethernet Network, Auto Negotiation
Audio:
5 Lines (2 default + 3 lines through License),
each line supporting 1+5 calls
Sample Rate: 24kHz
Sample Bit Depth: 24-Bit
Codec:
G.711 uLaw
G.711 ALaw
G.722
ETHERNET
Port Type:
RJ-45, 10/100Mbps Ethernet Network, Auto Negotiation
IP address: IPv4 (IPv6 upgradeable)
DANTE™ AUDIO
Port Type: RJ-45 Gigabit Ethernet connectors for Primary
and Secondary Ports
Audio: Digital Audio, 16 x 16 bidirectional channels
Sample Rate: 48kHz / 96kHz
Sample Bit Depth: 24-Bit
AMPLIFIER OUTPUT (applicable to 48T SKU)
Speaker Output Port: Dual binding posts
Audio: 2 Channels
Output Power: 10W Max, 8Ω load
Frequency Response:
20Hz – 22kHz @ +10dBu, +/- 0.5dBu
THD + N: 20Hz – 22kHz @ +10dBu, 1W, <0.3%
Dynamic Range:
20Hz – 22kHz @ 20dB, >102dB,
with 20kHz digital low pass filter
Crosstalk:
Channel to Channel, stimulus at 20dBu,
10W output to receptor 8Ω load, 20Hz – 22kHz, < -70dB
C-LINK EXPANSION BUS
Ports Type: RJ-45 (Cat5e or Cat6)
C-Link In & Out: Proprietary Expansion Bus
Audio: 64 Expansion channels
Cable: Solid core, factory terminated Cat 5e or 6 cable
Distance: Up to 150 Ft (45M)
P-LINK PERIPHERAL BUS
Ports Type: RJ-45 (Cat5e or Cat6)
P-Link In & Out: Proprietary Peripheral Bus
PoE In:
• P-Link In Port
• PoE IEEE802.3AF
Audio: Up to 3 Beamforming Microphone Array 2 units +
up to 3 DIALOG 20 Wireless Receiver units
Cable: Solid core, factory terminated Cat 5e or 6 cable
Distance: Up to 200 Ft (60M)
RS232
Port Type: DB9 Female
Settings: 9600/19200/38400/57600/115200 Baud;
Serial Echo; Flow Control
Support: Serial commands
GPIO
Port Type:
5.08mm Green color Phoenix/Euroblock type male header
Support: Control, Status, Variable Voltage Control
Power Pin: 5V DC @ 350mA Power Source
Pin 1 to 4:
Open Collector Outputs: 40VDC @ 250mA
Active Outputs (Source/Sink): 5VDC @25mA
Logic Inputs: 40.2kΩ pull up
Variable Voltage Control Inputs: 5VDC max
Ground Pin: GND
USB CONTROL
Port Type: USB-B connector
Location: Front Panel
Compatible:
USB 2.0
USB 3.0
LEDs
Location: Front Panel
Status LED:
Off: Unit still initializing
Blue - Fast Blinking: Stack Syncing in progress
Blue - Slow Blinking: Unit not configured
Blue - Solid: Configured unit
Red - Fast Blinking: Stack Sync error
CONVERGE Pro 2
Locate LED:
Blue - Blinking: Unit “Locate” command received
Power LED:
Blue - Solid: Unit is powered on
TOUCH SENSOR
Sensor Type: Capacitive Touch Button
Location: Front Panel
POWER & THERMAL
Port Type: AC Inlet
Mains Voltage: 100-240V AC, 50/60Hz
Power Consumption: 50 Watts Typical
Thermal: 170 BTU/Hr Typical
Operating Temperature:
14°F/-10°C to 104°F/40°C Ambient Temperature
DIMENSION & WEIGHT
RU size: 1 RU
Width x Depth x Height:
1. Without rack-ears:
17 x 10.73 x 1.72in or 43.2 x 27.3 x 4.4cm
2. With rack-ears:
19 x 10.73 x 1.72” or 48.3 x 27.3 x 4.4cm
Unit Weight: 9.3 lbs (Approximately)
Shipping Weight: 13.8 lbs (Approximately)
PACKAGE (as applicable based on SKUs)
Power Cord: 6 Ft (1.8M), Grounded, Qty 1
Input Connectors:
Terminal Block Connector, 3 Position (Orange), Qty 12
Output Connectors:
Terminal Block Connector, 3 Position (Black), Qty 8
GPIO Connector:
Terminal Block Connector, 6 Position (Green), Qty 1
C-Link Cable:
RJ-45 To RJ-45 Cable, 18 Inches (0.45M), Qty 1
Telephone cable: 12 Ft (3.6M), Qty 1
VoIP Cable: RJ-45 To RJ-45, 7 Ft (2M), Qty 1
USB Cable: USB Type A to Type B, 6 Ft (1.8M), Qty 1
Rack Ears: Pre-installed, Qty 2
Screw/Washer Kit: Rack Decor, Qty 4
PART NUMBERS
Part Number Product
910-3200-001 CONVERGE Pro 2 128
910-3200-001-D CONVERGE Pro 2 128D
910-3200-002 CONVERGE Pro 2 128T
910-3200-002-D CONVERGE Pro 2 128TD
910-3200-003 CONVERGE Pro 2 128V
910-3200-003-D CONVERGE Pro 2 128VD
910-3200-005 CONVERGE Pro 2 48T
910-3200-004 CONVERGE Pro 2 120
910-3200-101 CONVERGE Pro 2 128SR
910-3200-101-D CONVERGE Pro 2 128SRD
SALES AND INQUIRIES
North America
Tel: +1 801.975.7200
TollFree: +1 800.945.7730
TechSales: +1 800.705.2103
Fax: +1 801.303.5711
sales@clearone.com
Europe
Tel: +1.800.945.7730
global@clearone.com
Other product names may be registered trademarks of their respective owners who do not necessarily endorse ClearOne or ClearOne’s products. All rights reserved. Information in this document subject to change
without notice. © 2016 ClearOne.
Middle East
Tel: +1.800.945.7730
global@clearone.com
Asia Pacific
Tel: +1.800.945.7730
global@clearone.com
Other Regions
Tel: +1.800.945.7730
global@clearone.com
Loading...