Clay Paky C11260, C11270 Instruction Manual

1

INSTRUCTION MANUAL

ENGLISH

SPHERISCAN

SPHERILIGHT

C11260

C11270

PR

E

LIM

IN

A

R

Y

Congratulations on choosing a Clay Paky product!
We thank you for your custom.
Please note that this product, as all the others in the rich Clay
Paky range, has been designed and made with total quality to
ensure excellent performance and best meet your expectations
and requirements.

INDEX

Page Contents

2 Safety Information

3 Unpacking and preparation

4 Installation and start-up

5 Control panel

7 Maintenance

17 Optional accessories

18 Technical information

19 Cause and solution of problems

2

SPHERISCAN - SPHERILIGHT

SAFETY INFORMATION

EN

IT

DE

ES

FR

RU

SAFETY INFORMATION

IMPORTANT: Clay Paky recommends you carefully read and keep the safety information on this product, also
available in digital format at the following link:

http://www.claypaky.it/en

Ref: [FIS00M – Safety Information Spheriscan - Spherilight]

INFORMAZIONI DI SICUREZZA

IMPORTANTE: Clay Paky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative
a questo prodotto, sempre reperibili in versione digitale al seguente link:

http://www.claypaky.it/en/download

Rif: [FIS00M – Safety Information Spheriscan - Spherilight]

I

NFORMATIONEN ZUR SICHERHEIT

WICHTIG: Clay Paky empfiehlt, die Sicherheitsinformationen bezüglich dieses Produkts genau zu lesen und
aufzubewahren. Sie sind in Digitalversion immer unter folgendem Link auffindbar:

http://www.claypaky.it/en/download

Ref: [FIS00M – Safety Information Spheriscan - Spherilight]

INFORMACIONES DE SEGURIDAD

IMPORTANTE: Clay Paky recomienda leer detenidamente y conservar la información de seguridad relativa a este
producto. Además, está disponible una versión digital de la misma en el siguiente enlace:

http://www.claypaky.it/en/download

Ref: [FIS00M – Safety Information Spheriscan - Spherilight]

CONSIGNES DE SÉCURITÉ

IMPORTANT: Clay Paky recommande de lire attentivement et de conserver les informations de sécurité relatives
à ce produit, disponibles en version digitale au lien suivant:

http://www.claypaky.it/en/download

Réf. : [FIS00M – Safety Information Spheriscan - Spherilight]

ГДЕ ДОСТАТЬ ИНСТРУКЦИЮ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ НА НЕСКОЛЬКИХ ЯЗЫКАХ

ВАЖНО: Clay Paky рекомендует внимательно прочитать и сохранить инструкцию по технике безопасности
данного изделия, которая всегда доступна в электронном формате по следующей ссылке:

http://www.claypaky.it/en/download

Наименование: [FIS00M – Safety Information Spheriscan - Spherilight]

3

SPHERISCAN - SPHERILIGHT

UNPACKING AND PREPARATION

1

Installing the projector - Fig. 2
The projector can be installed on the floor resting, on a truss or on the ceiling or wall.

WARNING: with the exception of when the projector is positioned on the floor, the safety cable must be fitted. (Cod. 105041/001 available on request).
This must be securely fixed to the support structure of the projector and then connected to the fixing point as shown on the pictures above.

2

Packing contents - Fig. 1

LAM00D

4

SPHERISCAN - SPHERILIGHT

2

1

1

2

3

3

INSTALLATION AND START-UP

Connecting and disconnecting power cable - Fig. 3

5

SPHERISCAN - SPHERILIGHT

Switching on the projector - Fig. 6
Press the switch. The projector starts resetting the effects. At the same time, the following information scrolls on the display:

The control panel (Fig. 6) has a display and buttons for the complete programming and management of the projector menu.
The display can be in one of two conditions: rest status and setting status. When it is in the rest status, the display shows the projector’s DMX
address and the Fixture ID address (if set).
During menu setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns to rest status.
It should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the

F

key will be cancelled.

CONTROL PANEL

1

2

Dmx Address

Warning Message

Fixture ID

6

Firmware
Version X.X.X
Date - Hour

Connecting to the control signal line (DMX) - Fig. 5

Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use
microphone cable or other cable with characteristics differing from those specified. The end connections must be made using XLR type 5-pin male/female
connectors. A terminating plug must be inserted into the last projector with a resistance of 120Ohm (minimum 1/4 W) between terminals 2 and 3.
IMPORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing itself must be connected to the
shield braid and to pin 1 of the connectors.

Connecting to the mains supply - Fig. 4

Mains

4

5

xxx (Fixture ID)
Dmx Address xxx

System errors

E: .........................

W: .........................

SPHERISCAN - SPHERILIGHT

6

28

28

Reversal of the display - Fig. 7
To activate this function, press UP

B

and DOWN Ckeys simultaneously while the display is in the rest mode. This status will be memorised and

maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again.

S

etting the projector starting address

On each projector, the starting address must be set for the control signal (addresses from 1 to 512).
The address can also be set with the projector switched off.

Setting the projector Fixture ID

On each projector, the Fixture ID address must be set for an easy identification of the fixtures in an installation (ID from 1 to 255).
The Fixture ID address can be set with the projector switched off.

7

Functions of the buttons - Using the menu

Setting addresses and options with the projector disconnected

The projector’s DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity supply.
All that is needed is to press

F

to momentarily activate the display and thus access the settings. Once the required operations have been carried out,

the display will switch off again after a wait time of 30 seconds.

USING THE MENU:

1) Press

F

once – “Main Menu” appears on the display.

2) Use the UP

B

and DOWN Ckeys to select the menu to be used:

• Setup (Setup Menu): To set the setting options.

• Option (Option Menu): To set the operating options

• Informations (Informations Menu): To read the counters, software version and other information.

• Manual Control (Manual control Menu): To trigger the test and manual control functions.

• Test (Test Menu): To check the proper functionning of effects

• Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for a trained technical personnel.
To enable the "Advanced" see pag.15.

3) Press

F

to display the first item in the selected menu.

4) Use the UP

B

and DOWN Ckeys to select the MENU items.

Confirms the displayed value, or activates the displayed function, or enters the successive
menu.

Decreases the value displayed (with auto-repetitions) or passes to the next item in the menu.

Increases the value displayed (with auto-repetitions) or passes to the previous item in a menu.

Return to the top level

Commute from units, tens, hundreds, in the "Address", "Fixture ID" and "Calibration" menù.

F

C

DOWN

B

UP

D

LEFT

E

RIGHT

1

3

2

4

8

Opening the covers - Fig. 8.

7

SPHERISCAN - SPHERILIGHT

MAINTENANCE

Continue

➔

8

SPHERISCAN - SPHERILIGHT

1

2

3

9

Fan assembly removal - Fig. 9.

9

SPHERISCAN - SPHERILIGHT

1

2

3

6

4

5

7

8

1

0

Fan /Driver assembly removal - Fig. 10.

Continue

➔

10

SPHERISCAN - SPHERILIGHT

1

1

Periodical cleaning - Fig. 11
To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The
frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of the
working environment (air humidity, presence of dust, salinity, etc.).
Use a soft cloth dampened with any detergent liquid for cleaning glass to remove the dirt from the reflectors, from the lenses and filters. It is recommended
that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following operations:

• General cleaning of internal parts.

• Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Clay Paky.

• General visual check of the internal components, cabling, mechanical parts, etc.

• Electrical, photometric and functional checks; eventual repairs.

WARNING: The best way to clean the surface
is to pour ethanol on all the surface with a
wash bottle for example and then dry with
compressed air.
You can also clean with a soaked soft cloth for
more stubborn stains. If you don’t have
ethanol use a soft glass cleaner.

11

SPHERISCAN - SPHERILIGHT

2

1

1

2

Cleaning of the filters - Fig. 12.

Continue

➔

2

1

12

SPHERISCAN - SPHERILIGHT

1

3

A

A

A

2

1

3

14

Opening and closing lamp compartment - Fig. 13

Lamp change - Fig 14

Take the new lamp out of its package and insert in the fitting.

WARNING: do not touch the lamp’s envelope with bare hands. Should this happen, clean the bulb with a cloth soaked in alcohol and dry it
with a clean, dry cloth.

CAUTION: Fast lamp ON-OFF cycles (for example 10 minutes ON / 10 minutes OFF) will reduce the lamp life.

16

Rotating gobo wheel - Fig. 16.
ATTENTION:

- Before use custom gobos contact Clay Paky;

- The original gobos have a special coating designed specifically to resist to the high temperatures;

- The rotating gobo wheel only use dichroic glass gobos (it is not possible to use metal gobos);

- For more information contact Clay Paky.

13

SPHERISCAN - SPHERILIGHT

Replacing fuse - Fig. 15

3

2

1

F

use

6,3 x 32mm 10AT (030470)

1

5

Continue

➔

14

SPHERISCAN - SPHERILIGHT

Installation under the stage - Fig. 17.
To install the projector under the stage, it is suggested to remove the main bracket and mount the two handles (part number C21090) that allow you to
drop easily the projector.

2

1

1

3

3

4

4

ø

1

0

(

0

.

3

9

"

)

522 ±0,5
(20.55")

470

(18.50")

80

(3.15")

390

(15.35")

550

(21.65")

162 ±0,3

(6.38")

R

20

(0.79"

)

5

6

R195

(7.

68")

450

(17.72")

C21090

1

7

15

SPHERISCAN - SPHERILIGHT

How to fit the fans covers - Fig. 18.
Depending on how the projector is installed, the covers fan must be positioned so that in case of rain, the water flows in the correct way.

0° ÷ +45°

0° ÷ -45°

1

180°

2

180°

180°

180°

3

2

3

180°

3

1

8

Continue

➔

16

SPHERISCAN - SPHERILIGHT

1

6

3

4

5

2

1

9

Battery removal - Fig. 19

This product contains a rechargeable lithium iron tetraphosphate battery. To preserve the environment, please dispose the battery at the end
of its life according to the regulation in force.

LiFePO4

17

SPHERISCAN - SPHERILIGHT

OPTIONAL ACCESSORIES

C21090 - Handle kit C21091 - Fixing Plate Kit

C21092 - Cover Kit C21093 - Mirror Kit

18

SPHERISCAN - SPHERILIGHT

TECHNICAL INFORMATION

4

97

(19.57")

4

15

(16.34")

358

(

14.09")

886

(

34.88")

4

98

(19.61")

4

15

(16.34")

5

50

(21.65")

5

22

(20.55")

386

(15.20")

162

(6.38")

ø

11

(0.

43"

)

512

(

20.16")

374

(

14.72")

886

(

34.88")

198

(7.80")

1

84

(7.24")

3

00

(11.81")

184

(

7.24")

1

98

(7.80")

Power supplies

200/240V 50/60 Hz

Input power:

1600VA

Total lumen output:

20.000lm @ 1200W

Light source:

Lamp OSRAM Lok-it 1400-PS

• Color Temperature: 6.000 K

• Life: 750 hrs

• CRI 95

• Luminous flux: 120000 lm

• Base PGJ28 Lok-it!

Motors

21 stepper motors, operating with micro steps,
totally microprocessor controlled

Inputs:

• DMX 512

• Art-Net

Moving mirror:
PAN

• Angle Rotation: 360° continuous rotation

• Fast speed: 717 ms

• Normal Speed: 5442 ms

• Resolution PAN: 1.4118°

• Resolution PAN FINE: 0.0055°

TILT

• Angle Rotation: 60°

• Fast speed: 239 ms

• Normal Speed: 1174 ms

• Resolution TILT: 0.2353°

• Resolution TILT FINE: 0.0009°

Weight

• Spheriscan: 35 Kg (77 lbs), 32 Kg (70.5 lbs)
without brackets

• Spherilight: 31.5 Kg (69.4 lbs), 28.5 Kg (62,8 lbs)
without brackets

IP rating

IP54

Safety devices

Automatic break in power supply in case of
overheating or failed operation of cooling system

Cooling

Forced ventilation with fans

Noise level [dBA]

Standard mode 1200W:
52dBA (background noise 34.5)

Body

• Aluminum and steel structure with plastic cover

• Circular handle and moving bracket for
transportation

Working position

Vertical or horizontal ±45° Working Position to
ensure IP54

Effects section

• Lamp OSRAM Lok-it 1400-PS works at 1200 W

• Linear 0-100% dimmer

• CMY System

• Fast Stop/Strobe effect

• N° 1 Color Wheel with 7 color filters

• N° 1 Wheel with 6 rotating gobos (image ø26 mm)

• N° 1 Wheel with 8 fixed gobos (image ø25 mm)

• N° 1 Iris (16 blades)

• N° 1 Rotating Prism (8 faces)

• N° 1 linear Frost (Heavy)

• 13° ÷ 34° Optical Zoom
(Diameter front lens: ø80 mm)

• N° 90 RGB LEDs incorporated into the
transparent dome

Control and programming

• DMX protocol signal: USITT DMX 512

• Display: LCD 128 x 64 bit, backlit LED, white on
black

• Pan and Tilt Resolution: 16 bit

• Focus Indexing Resolution: 16 bit

• Dimmer Resolution: 16 bit

• Rotation gobo Resolution: 16 bit

• Movement control: Vectorial

• DMX signal connection: 5 pole XLR input and
output

• Software upload through DMX input / Ethernet input

Electronics

• Long life self-charging buffer battery

• Function reset from control unit

• ON/OFF lamp control from the lighting desk

• Function reset from the lighting desk

• "AUTOTEST" function from menu

• Art-Net

• Electronic monitoring with status error

• Cooling system monitoring

• DMX level monitoring on all channels

• Internal data transmission diagnostics

• Firmware Upgrade with no power

• Firmware upload from another fixture

19

SPHERISCAN - SPHERILIGHT

CAUSE AND SOLUTION OF PROBLEMS

THE PROJECTOR WILL NOT SWITCH ON

PROBLEMS

ELECTRONICS NON-OPERATIONAL

D

EFECTIVE PROJECTION

REDUCED LUMINOSITY

POSSIBLE CAUSES CHECKS AND REMEDIES

N

o mains supply.

L

amp exhausted or defective.

S

ignal transmission cable faulty or disconnected.

I

ncorrect addressing.

F

ault in the electronic circuits.

L

enses or reflector broken

D

ust or grease deposited.

C

heck the power supply voltage.

R

eplace the lamp. (See instructions).

R

eplace the cables.

C

heck addresses (see instructions).

C

all an authorised technician.

C

all an authorised technician.

C

lean (see instructions).

CLAY PAKY S.p.A. - Via Pastrengo, 3/b - 24068 Seriate (BG) Italy - Tel. [phone] - Fax [phone] - www.claypaky.it

IST00U/001 – EN - PRELIMINARY - 04/2016