Claypaky AXCOR PROFILE 900 Instruction Manual

1

INSTRUCTION MANUAL

Congratulations on choosing a Claypaky product!
We thank you for your custom.
Please note that this product, as all the others in the rich
Claypaky range, has been designed and made with total quality
to ensure excellent performance and best meet your expectations
and requirements.

INDEX

Page Contents

2 Safety information

3 Unpacking and preparation

4 Installation and start-up

5 Control panel

7 Maintenance

14 Technical information

ENGLISH

C61700

AXCOR PROFILE 900

P

R

E

L

I

M

I

N

A

RY

SAFETY INFORMATION

2

AXCOR PROFILE 900

EN

IT

DE

ES

FR

RU

SAFETY INSTRUCTIONS

IMPORTANT: Claypaky recommends you carefully read and keep the safety information on this product, also
available in digital format at the following link:

http://www.claypaky.it/en

Ref: FIS017 - Safety Information Axcor series

INFORMAZIONI DI SICUREZZA

IMPORTANTE: Claypaky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative
a questo prodotto, sempre reperibili in versione digitale al seguente link:

http://www.claypaky.it/en/download

Rif: FIS017 - Safety Information Axcor series

I

NFORMATIONEN ZUR SICHERHEIT

WICHTIG: Claypaky empfiehlt, die Sicherheitsinformationen bezüglich dieses Produkts genau zu lesen und
aufzubewahren. Sie sind in Digitalversion immer unter folgendem Link auffindbar:

http://www.claypaky.it/en/download

Ref: FIS017 - Safety Information Axcor series

INFORMACIONES DE SEGURIDAD

IMPORTANTE: Claypaky recomienda leer detenidamente y conservar la información de seguridad relativa a este
producto. Además, está disponible una versión digital de la misma en el siguiente enlace:

http://www.claypaky.it/en/download

Ref: FIS017 - Safety Information Axcor series

CONSIGNES DE SÉCURITÉ

IMPORTANT: Claypaky recommande de lire attentivement et de conserver les informations de sécurité relatives à
ce produit, disponibles en version digitale au lien suivant:

http://www.claypaky.it/en/download

Réf. : FIS017 - Safety Information Axcor series

ИНСТРУКЦИЮ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ

ВАЖНО: Claypaky рекомендует внимательно прочитать и сохранить инструкцию по технике безопасности
данного изделия, которая всегда доступна в электронном формате по следующей ссылке:

http://www.claypaky.it/en/download

Наименование: FIS017 - Safety Information Axcor series

3

AXCOR PROFILE 900

UNPACKING AND PREPARATION

1

PAN Mechanism Lock and Release (every 90°) - Fig. 2

TILT Mechanism Lock and Release (every 45°) - Fig. 3

2 3

Packing contents - Fig. 1

9

0

°

9

0

°

9

0

°

9

0

°

UNLOCKED

LOCKED

4

5

°

4

5

°

4

5

°

4

5

°

4

5

°

2 x 183102/805

4

AXCOR PROFILE 900

4

2

1

1

2

3

5

INSTALLATION AND START-UP

Connecting and disconnecting power cable - Fig. 5

Installing the projector - Fig. 4

The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.

WARNING: with the exception of when the projector is positioned on the floor, the safety cable must be fitted. (Cod. 105041/003 available on request).
This must be securely fixed to the support structure of the projector and then connected to the fixing point at the centre of the base.

5

AXCOR PROFILE 900

Switching on the projector - Fig. 8
Press the switch. The projector starts resetting the effects. At the same time, the following information scrolls on the display:

Model Firmware xxx (Fixture ID) System errors

Axcor Version X.X.X Dmx Address xxx E: .........................

Profile 900 Date - Hour W: .........................

On conclusion of resetting in case of absence of the dmx signal, Pan and Tilt move to the “Home” position (Pan 128 bit - Tilt 128 bit). The control
panel (Fig. 8) has a display and buttons for the complete programming and management of the projector menu. The display can be in one of two
conditions: rest status and setting status. When it is in the rest status, the display shows the projector’s DMX address and the Fixture ID address
(if set).
During menu setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns to rest status.
It should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the

F

key will be cancelled.

CONTROL PANEL

1

2

Dmx Address

War ning Message

Fixture ID

8

Connecting to the control signal line (DMX) - Fig. 7
Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use
microphone cable or other cable with characteristics differing from those specified. The end connections must be made using XLR type 3 or 5 pin male/female
connectors. A terminating plug must be inserted into the last projector with a resistance of 120Ohm (minimum 1/4 W) between terminals 2 and 3.
IMPORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing itself must be connected to the
shield braid and to pin 1 of the connectors.

C

onnecting to the mains supply - Fig. 6

S

IGNAL

SCREEN

DMX 512

5 PIN

1

2

3

4

5

SIGNAL

Mains

6

7

Continue

➔

AXCOR PROFILE 900

6

28

28

Reversal of the display - Fig. 9
To activate this function, press UP

B

and DOWN Ckeys simultaneously while the display is in the rest mode. This status will be memorised and

maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again.

Setting the projector starting address

On each projector, the starting address must be set for the control signal (addresses from 1 to 512).
The address can also be set with the projector switched off.

Setting the projector Fixture ID

On each projector, the Fixture ID address must be set for an easy identification of the fixtures in an installation (ID from 1 to 255).
The Fixture ID address can be set with the projector switched off.

9

Functions of the buttons - Using the menu

Setting addresses and options with the projector disconnected

The projector’s DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity supply.
All that is needed is to press

F

to momentarily activate the display and thus access the settings. Once the required operations have been carried out,

the display will switch off again after a wait time of 30 seconds.

USING THE MENU:

1) Press

F

once – “Main Menu” appears on the display.

2) Use the UP

B

and DOWN Ckeys to select the menu to be used:

• Setup (Setup Menu): To set the setting options.

• Option (Option Menu): To set the operating options

• Informations (Informations Menu): To read the counters, software version and other information.

• Manual Control (Manual control Menu): To trigger the test and manual control functions.

• Test (Test Menu): To check the proper functionning of effects

• Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for a trained technical personnel.

3) Press

F

to display the first item in the selected menu.

4) Use the UP

B

and DOWN Ckeys to select the MENU items.

Confirms the displayed value, or activates the displayed function, or enters the successive
menu.

Decreases the value displayed (with auto-repetitions) or passes to the next item in the menu.

Increases the value displayed (with auto-repetitions) or passes to the previous item in a menu.

Return to the top level

Commute from units, tens, hundreds, in the "Address", "Fixture ID" and "Calibration" menù.

F

C

DOWN

B

UP

D

LEFT

E

RIGHT

7

AXCOR PROFILE 900

Locking and releasing Pan and Tilt movements - Refer to the instructions in the UNPACKING AND PREPARATION section.
Opening the head covers - Fig. 10.

Closing the head covers - Fig. 11.

2

1

1/4 Turn

2

1

CLICK!!

1

/4 Turn

1

1/4 Turn

2

10 11

MAINTENANCE

Continue

➔

8

AXCOR PROFILE 900

1

2

Periodical cleaning - Fig. 12
To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The
frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of the
working environment (air humidity, presence of dust, salinity, etc.).
Use a soft cloth dampened with any detergent liquid for cleaning glass to remove the dirt from the reflectors, from the lenses and filters. It is recommended
that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following operations:

• General cleaning of internal parts.

• Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Claypaky.

• General visual check of the internal components, cabling, mechanical parts, etc.

• Electrical, photometric and functional checks; eventual repairs.
NOTE: keep a careful cleaning of the ''CMY/colour filters assembly'' to prevent rapid deterioration.

9

AXCOR PROFILE 900

1

2

1

3

Extraction of the effect modules: Preliminary operations - Fig. 13.

NOTE:

- Do not disconnect wiring harnesses when the fixtures is switched-on, to avoid to damage electronic boards.

- Do not switch-on the fixtures with wiring harness disconnected.

Continue

➔

10

AXCOR PROFILE 900

2

1

1

4

Extraction of the effect modules - Fig. 14.
IMPORTANT: Grasp the modules using the support structure and not the details which could get damaged.
Insertion of the effect modules: Repeat the operations indicated in Fig. 13, 14 and 15 in reverse order.

11

AXCOR PROFILE 900

2

1

1

5

Extraction of the effect modules - Fig. 15.
IMPORTANT: Grasp the modules using the support structure and not the details which could get damaged.
Insertion of the effect modules: Repeat the operations indicated in Fig. 13, 14 and 15 in reverse order.

Continue

➔

12

AXCOR PROFILE 900

1

2

(4th) GOD003/004

(5th) GOD003/005

(6th) GOD003/014 GOD003/001 (1st)

GOD003/002 (2nd)

GOD003/013 (3rd)

17

Replacing rotating gobos (ø 32.8 mm - max 23 mm image – thickness 1.1 mm) - Fig. 17

- Before use custom gobos contact Claypaky;

- The original gobos have a special coating designed specifically to resist to the high temperatures;

- The rotating gobo wheel only use dichroic glass gobos (it is not possible to use metal gobos);

- For more information contact Claypaky;

Bearing group replacement - Fig. 16

16

13

AXCOR PROFILE 900

Battery removal - Fig. 18

This product contains a rechargeable lithium iron tetraphosphate battery. To preserve the environment, please dispose the battery at the end
of its life according to the regulation in force.

1

2

6

3

5

4

LiFePO4

18

14

AXCOR PROFILE 900

TECHNICAL INFORMATION

442

(17.40")

424

(16.69")

674

(26.53")

653

(25.71")

874

(34.41")

501

(19.72")

680

(26.77")

AXCOR PROFILE 900

• Category: High wattage moving head LED spotlight

• Total lumen output: 24,000 lumen

LIGHT SOURCE

• Source: 880W white LED engine (custom lens solution)

• LED Life Expectancy: 20,000 hours

• Typical Lumen Maintenance: 70@20,000 hours

• Luminous Flux: 46,000 lm

• Output Color Temperature: 7000K

• Optional LED Engine: 34,000 lm - 5600K - CRI~90

OPTICAL SYSTEM

• Zoom: 7°- 40°, Linear and motorised

• Focus system: Motorised with Autofocus

DYNAMIC EFFECTS

• Rotating Gobos: 6 HD interchangeable gobos, ø 32.8; image ø 26; indexable
on 540°: small dots, plumens, clouds V2, thin shaft, oak three, water lines

• Animation Wheel: 1 x interchangeable disc, clockwise and counter­clockwise rotation at variable speed

• Rotating Prism: 1 x 4-facet prism, interchangeable, indexable on 540°;
clockwise and counter-clockwise rotation at variable speed

• Variable “soft edge” frost: 0-100% linear

• Variable flood frost: 0-100% linear

• Color system: CMY with gradually insertion discs; 16bit

• CTO: Linear from…… to……..

• Color wheel 6 colors: dark red, brilliant blue, green, CRI enhancement filter,
golden amber, navy blue

• Iris: 16-bit, multiple macros (random, pulsing…)

• Dimmer: 16 bit electronic and linear; 4 dimmer curves

• Strobe: 12 flash/sec, electronic, instant open and blackout

• Framing System: 4 focal planes, 90° rotation; independent movement of any
single blade; curtain effect with single blade

CONSTRUCTION

• Structure: in aluminium and steel with injection plastic cover

• Handles: Two side handles for transportation

• Device locking: PAN and TILT mechanisms for transportation

• Protection Rating: IP20

MOVEMENT

• PAN range: 540°

• TILT range: 250°

• PAN Resolution: PAN = 2.11° - PAN FINE = 0.008°

• TILT Resolution: TILT = 0.960° - TILT FINE = 0.004°

THERMAL SPECIFICATIONS

• Minimum distance of illuminated objects: 3 meters (9’ 10”)

• Minimum distance from flammable materials: 0.2 meters (8”)

• Max ambient temperature: 40°C (104°F)

• Max temperature of the external surface: 90°C (194°F)

• Safety devices : Bipolar circuit breaker with thermal protection. Automatic break
in power supply in case of overheating. Forced ventilation with axial fans.

ELECTRICAL SPECIFICATIONS

• AC power input: Neutrik PowerCON TRUE1 (IP65)

• Input Voltage: 115/230V 50/60 Hz

• Power supply switching: Automatic

• Input Power: 1400VA at 230V 50Hz

• Power consumption: 1400VA

• Certifications: CE, cETLus

MECHANICAL SPECIFICATIONS

• Height: 826mm (32.52in)

• Width: 501mm (19.72in)

• Depth: 425mm (16.73in)

• Weight: 45Kg (99.2lbs)

CONTROL AND PROGRAMMING

• DMX 512 control channels: 38/42

• Control signal: USITT DMX 512

• Protocols: RDM, WebServer and Art-Net

• Display: Graphic LCD backlit b/w Display

• Display battery: Long life self-charging buffer battery

• Pan/Tilt Resolution: 16 bit

• Focus Resolution: 16 bit

• Gobo Resolution: 16 bit

• Dimmer Resolution: 16 bit

• Movement control: vectorial

• DMX signal connection: 5 pole XLR input and output

• Firmware update: Software upload through DMX input

RIGGING AND INSTALLATION

• Working position: Any

• Hanging system: 2x fast-lock omega clamps (1/4 turn) on the base

• Optional: 48-51mm, max300Kg clamps; Ø 4mm, lenght 680mm safety cable

ACCESSORIES

Foam Shell
Flight Case (incl. 2 foam shells)

CLAYPAKY S.p.A. - Via Pastrengo, 3/b - 24068 Seriate (BG) Italy - Tel. [phone] - Fax [phone] - www.claypaky.it

IST015/001 – EN - Rev.0 10/2017