Class1 ITL Mini Remote Driver 112648 User Manual

Intelli-Tank Mini Remote Driver

Quick Manual

UNIT SPECIFICATIONS

1. Unit P.N. 112082.

2. System Voltage 9-32 volts.

3. Outputs rated for .5 amps (Short
Protected)

INSTALLATION

WIRING
Mating Connector: AMP 794821-1

Seal: AMP 794772-8
Wire Seal: AMP 794758-1
Terminals: AMP 770988-1
(Optional Wiring Pigtail # 112646)

Pin Description

1. Ground

2. Output 1

3. Output 2

4. Output 3

5. Data Input

6. Data Reference

7. Output 4

8. Power

1 Page Manual P.N. 112648 2-23-2005

UNIT OPERATION
The unit is a slave for the Class1 ITL 4 or 5 light

tank level gauge. It will drive 4 external lights up
to .5 amps a piece or for higher current lights a
relay must be used.

During power up the unit will cycle on each
output starting with output 1. The unit will then
show current tank level information.

Wiring Diagram Example.