Class1 Engine status OEM User Manual

OEM MENU

T o enter the OEM Men u, the engine must be at less than 900 RPM

Press the switches in this sequence.

SELECT : SILENCE : SELECT : SELECT : MENU

Scroll through menu items by pressing the MENU switch.
Select items from the menu by pressing the
After Selection, change items by pressing the SELECT switch.
Save inf ormation and exit from the menu by pressing the
* You must save an y changed item before moving on in the menu!

MENU CLR HRS SELECT clk: PT O PTO Clock

Press the select switch first and then the silence switch, hold both for 1 second and

then release select first and then silence to save data

SELECT clk: USER User Clock

Press the select switch first and then the silence switch, hold both for 1 second and

then release select first and then silence to save data

MENU SVC TIME SELECT Time Interval digits displayed on Engine RPM

Change hours by depressing the SELECT switch
Direction changes each time the key is pressed.
press SILENCE to update service interval (0-9999 hrs)

SELECT switch.

SILENCE switch unless noted.

MENU LV-ALM: (Y / N) SELECT enable or disable the low voltage alarm
MENU AUX INP SELECT -AUX- IN-

configure message for this input that will be displa yed when it is active .

SELECT selects character to change, indicated b y flashing cursor.
SILENCE scroll letters (A-Z blank a-z 0-9)

Press the select switch first and then the silence switch, hold both for 1 second and

then release select first and then silence to save data

MENU ALARM: (Y / N) SELECT enable or disable the aux input alarm
MENU AUX HRS SELECT -AUX- HR-

configure message for this input that will be displa yed when it is active .

SELECT selects character to change, indicated b y flashing cursor.
SILENCE scroll letters (A-Z blank a-z 0-9)

Press the select switch first and then the silence switch, hold both for 1 second and

then release select first and then silence to save data

MENU CHG LOGO SELECT -CLASS1-

configure message that will be displayed in the Message Center .

SELECT selects character to change, indicated b y flashing cursor.
SILENCE scroll letters (A-Z blank a-z 0-9)

Press the select switch first and then the silence switch, hold both for 1 second and

then release select first and then silence to save data

MENU DEF AULTS SELECT returns ESC to default configuration.

1

SERVICE MENU

T o enter the Service Menu, engine RPM can not be greater than 900.

Press the switches in this sequence.

SILENCE : SELECT : SILENCE : SILENCE : MENU

Scroll through menu items by pressing the MENU s witch.
Select items from the menu by pressing the SELECT switch.
After Selection, change items by pressing the
Save inf ormation and exit from the menu by pressing the

SELECT switch.

SILENCE switch unless noted.

* You must save an y changed item before moving on in the menu !

Service Menu

MENU DEG: (CLNT / OIL) SELECT toggles source for temperature information
MENU SETPOINT SELECT LO is displayed on the OIL PRESSURE display

LO ALARM SELECT low oil pressure alarm (0-20 PSI)

Press the select switch first and then the silence switch, hold both for 1 second and

then release select first and then silence to save data

MENU SETPOINT SELECT HI is displayed on the ENG TEMP display

HI ALARM SELECT high temperature alarm (200-250 oF)

Press the select switch first and then the silence switch, hold both for 1 second and

then release select first and then silence to save data

MENU SETPOINT SELECT LO is displayed on the VOLTS display

LO ALARM SELECT low voltage alarm (10.0-13.0 VDC)

Press the select switch first and then the silence switch, hold both for 1 second and

then release select first and then silence to save data

MENU SETPOINT SELECT HI is displayed on the VOLTS display

HI ALARM SELECT high voltage alarm (13.0-17.0 VDC)

Press the select switch first and then the silence switch, hold both for 1 second and

then release select first and then silence to save data

MENU PTO SVC SELECT Ack Req? clear the PT O SVC Message

depress SELECT & MENU, release SELECT to save.

Display will read NS=xxxx, where xxxx indicates when the next ser-
vice is due.

2