Clas Ohlson LF-45R-UK, LF-45R Instruction Manual
Tower Fan
Pelaräkt
Stolpevifte
Pylvästuuletin
EnglishSvenskaNorskSuomi
Art.no Model
18-2844 LF-45R-UK
36-4526 LF-45R
Ver. 201012
2
Tower Fan
Art.no 18-2644 Modell LF-45R-UK
36-4526 LF-45R
Please read the entire instruction manual before using the product and save it for
future reference. We reserve the right for any errors in text or images and any
necessary changes made to technical data. If you have any questions
regarding technical problems please contact Customer Services.
Safety
• This product information should be read carefully before the product is used.
Failure to adhere to these safety instructions may lead to fire, short circuiting,
or a life-threatening situation. Save the instruction manual for future reference.
• Check that all parts are present and undamaged when the product is unpacked
from the box.
• Never use the product if the flex, plug or any other part is damaged or is not
working properly. Never try to repair or modify the product on your own.
Contact a qualified or approved repairman.
• This fan is intended for private use only and should not be used for industrial
purposes. Do not operate the fan on windowsills.
• This fan is only to be used indoors, in dry and clean environments. Never place the fan
close to baths, swimming pools, or containers full of liquid into which it might fall.
• Always unplug the fan when it is not in use.
• Never leave unsupervised children together with the fan.
• Never immerse the fan in water or other liquid.
• Do not turn on the power before the fan is completely assembled. The fan must
stand upright and not be used when it is lying flat.
• Make sure that foreign objects do not enter the fan since this can cause short
circuiting, electric shock, or fire hazard.
• Never turn the fan off by pulling out the plug. Make sure that the on/off switch is
set to “0” and then pull out the plug.
• The fan must be completely assembled before use.
• Never use the tower fan in places where explosive gases or liquids are stored.
• The tower fan contains no replaceable parts. Never dismantle the tower fan.
• This product must not be used by anyone (including children) suffering from physical
or mental impairment. This product should not be used by anyone who does not
have the proper experience or knowledge of the product unless they have been
instructed in its use by someone who takes responsibility for their safety.
• Never let children play with the tower fan.
• Never use the tower fan together with any auxiliary speed control devices.
Doing so can lead to fires and electric shocks.
English
3
Product description
1. Control panel
2. Display
English
3. Back
4. Grille
5. Base
6. Foot
7. Remote controller
1
2
3
4
7
5
6
Assembly
1. Remove all packaging.
2. Join the two halves of the foot together.
3. Turn the fan upside down.
4. Place the foot onto the base.
5. Place the cable into the cable holder.
6. Screw on the base using the supplied screws.
7. Turn the tower fan the right way up again.
4
Buttons and functions
Timer + Press this button to activate the timer. Every press of the button
increases the setting by 1 hour, up to 12 hours.
Timer - Press this button to activate the timer. Every press of the button
decreases the setting by 1 hour, down to 0 hours.
Mode There are 3 modes (night, nature and normal). Press this button
to select the desired mode.
On/Off Starts and stops the tower fan.
Speed There are 3 speeds (high, medium and low). The selected speed is
indicated on the display. Press the button to select a speed.
OSC Press this button to start the fan oscillating. Press it once more to stop
the fan oscillating.
1. Night mode
2. Nature mode
3. Room temperature
4. Oscillation
5. Speed
1 2
3
English
Remote controller
Changing batteries
1. Remove the battery cover.
2. Remove the old batteries and
insert 2 x AAA/LR03 batteries.
3. Refer to the markings in the
battery compartment.
4. Replace the battery cover.
4
5
5
Care and maintenance
• Unplug the mains lead from the wall socket.
• Use a vacuum cleaner to clean
English
the back of the fan where the plastic grille
covers the air intake.
• Use a soft damp cloth to wipe the housing.
Never use solvents or abrasive cleaning agents.
• Unscrew and remove the grille and then
carefully wipe off the fan blade.
1
1. Screw
2. Grille
3. Foot
4. Screw the grille back on.
Please note that the tower fan is self-lubricating. None of the parts needs extra
lubrication. The tower fan requires no maintenance whatsoever.
3
Disposal
Follow local ordinances when disposing of this product.
If you are unsure how to proceed, contact your local authority.
Specifications
Voltage 230 V AC, 50 Hz
Power 45 W
Oscillation 90°
Overall size (L x W x H) 320 x 320 x 1145 mm
Weight 4.2 kg
Remote controller batteries 2 x AAA/LR03 batteries
2
6
Loading...