Page 1
3 IN 1 ROLLER STAND
MODEL NO: CARS3IN1
PART NO: 6500983
OPERATION & MAINTENANCE
INSTRUCTIONS
ORIGINAL INSTRUCTIONS
LS1117 - ISS 2
Page 2
INTRODUCTION
Thank you for selecting this Clarke roller stand.
Read this manual before use and save it for future reference.
SAFETY
• Max load at min height (760 mm) - 60 kg.
• Max load at max height (1080 mm) - 45 kg.
• Make sure that the lock handle is properly tightened before use.
• Do not use the stand as a step ladder or scaffold.
• Never use the product if any parts are missing.
GUARANTEE
This roller stand is guaranteed against faulty manufacture for a period of 12
months from the date of purchase.
Please keep your receipt which will be required as proof of purchase.
This guarantee is invalid if the roller stand has been abused, tampered with, or
not used for its primary function.
Faulty goods must be returned to their place of purchase, no roller stand can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
2
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
Page 3
ASSEMBLY
ATTACH THE FEET
ATTACH THE LOCK HANDLE
ATTACH THE ROLLER HEAD
3
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
Page 4
HOW TO USE THE ROLLER STAND
1. Open the legs of the stand fully.
• When feeding the workpiece
over the roller stand, always
feed it from the rear of the
stand as shown on the right, this
will increase the stability of the
stand.
CONFIGURATION
There are 3 positions in which you can use this roller stand, simply rotate the
head to the required position.
ROLLER
Allows the workpiece to be moved
along one plane.
BALL ROLLER
Allows the workpiece to be moved
along two planes.
STAND CONFIGURATION:
Provides basic support of the
workpiece.
ADJUST THE HEIGHT
1. Rotate the lock handle
counterclockwise to loosen the
roller head.
2. Lift the roller head to the correct
height (between 760 - 1080 mm).
3. Rotate the lock handle clockwise
to lock the roller into position.
4
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
Loading...