Clarke BB 8, 3403050 User guide

BRACKET BENDER

MODEL No. BB8

Suitable for forming metal up to 8mm in thickness/diameter.

Bolt the tool to a firm support... workbench or similar.

Place work as shown,
adjusting the work stop as
required.

Pull the lever to achieve the
desired shape as shown in
Fig.2.

2

1

Note: The work support may be located
at any position on the bar.

Clarke International. Hemnal Street, Epping Essex CM16 4LG

Thank you for purchasing this CLARKE Bracket Bender

This product is guaranteed against faulty manufacture for a period of
12 months from the date of purchase. Please keep your receipt as proof
of purchase.

This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.

Faulty goods should be returned to their place of purchase, no product
can be returned to us without prior permission.

This guarantee does not effect your statutory rights.

PARTS AND SERVICE CONTACTS

For Spare Parts and Service, please contact your nearest dealer,

or CLARKE International, on one of the following numbers.

PARTS & SERVICE TEL: [phone]

PARTS & SERVICE FAX: [phone]

or e-mail as follows:

PARTS: [e-mail]

SERVICE: [e-mail]