Page 1
8 LITRE HAND SPRAYER
MODEL NO: 8LS
PART NO: 3402266
USER INSTRUCTIONS
ORIGINAL INSTRUCTIONS GC0718 ISS 1
Page 2
INTRODUCTION
Thank you for purchasing this CLARKE Sprayer, designed for use with
insecticides or other water-based products only.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission. This guarantee does not effect your
statutory rights.
GENERAL SAFETY PRECAUTIONS
1. Never use this sprayer to store or spray flammable solvent-based
chemicals.
2. Empty the contents if the sprayer is not to be used for long periods.
3. If insecticide is being sprayed, always wear a protective mask, goggles
and gloves to protect the skin and face. Never spray chemical products
facing into the wind.
4. Never spray pesticide in the direction of other people, animals or
foodstuffs.
5. Never use the sprayer for handling hot liquids and avoid operating in
excessively hot environments.
6. Always comply with any applicable insecticide manufacturers safety
instructions/directives before use.
7. Stop using the sprayer if the container or hose is found to be damaged.
2
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Page 3
OVERVIEW
SPECIFICATION
Dimensions Diameter x Height 180 x 555 mm
Weight 1.43 kg
Volu m e 8 L i t res
Lance Length 550 mm (inc sparay gun)
Hose Length 1.2 m
Piston Material Metal/polymer
Please note that the details and specifications contained herein, are correct
at the time of going to print. However, CLARKE International reserve the right
to change specifications at any time without prior notice.
3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Page 4
ASSEMBLY
1. If not already fitted, clip the
shoulder strap to the attachment
points. Adjust the strap length as
required using the buckles.
2. Screw the lance assembly onto
the trigger/handle assembly.
• The other end of the hose
should already be connected
to the container.
3. Make sure that all connections
are fully hand tightened to
prevent leaks and loss of pressure.
NOTE: Do not overtighten the
components. Leave a gap
as shown.
4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Page 5
OPERATION
1. Unscrew the handle and pump
assembly in order to fill the
container with the desired liquid.
2. Screw the pump and handle
assembly back on firmly.
3. Release the carrying lugs from the
pump body by twisting the handle
anticlockwise.
4. Pressurise the container by
pumping the handle.
5. Squeeze the trigger to begin
spraying. When the spray
weakens, pump the handle to repressurise the container.
6. Push the trigger forward to lock in
position to maintain a constant
spray without needing to hold the
trigger. Slide the trigger back to
release.
7. Adjust the width of the spray by
twisting the tip of the nozzle.
8. If leaks or poor delivery are experienced, always check the connections.
9. Push the pump handle downward and twist left or right to engage the
carrying lugs in the cap when lifting the unit.
AFTER USE
After use, the sprayer should be flushed thoroughly with clean water to avoid
the possibility of blockages from product residue or any cross-contamination
between different products.
Store in a cool place out of reach of children.
If not used for long periods or used continuously for several days, add a light
smear of vaseline to the sealing washers and moving parts to reduce wear
and assist free movement.
Always release any pressure before storage.
5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Page 6
Page 7
COMPONENT PARTS
No Description No Description
1 Cap 26 Safety Valve Rod
2 Swirl Nozzle 27 O-ring 8.5 diameter
3 O-ring 14 diameter 28 Safety Valve Seat
4 Lance End Bend 29 Sealing Ring
5 Lance End Fitting 30 Strap Ring
6 Lance Rod 31 Strap Buckle
7 Trigger Body 32 Strap
8 Trigger Pin 33 Shoulder Pad
9 Trigger 34 Funnel
10 Trigger Sealing Ring 35 Funnel Washer
11 O-Ring 6.8 diameter 36 Container
12 Valve Plug 37 Cap of Hose
13 O-Ring 7.6 diameter 38 Coupling Head
14 Trigger Spring 39 Flat Washer
15 Trigger Seal Ring 40 Suction Tube
16 Trigger Nut 41 Small Filter Screen
17 Trigger Filter 42 Air Cylinder
18 Trigger Handle 43 Sealing Gasket
19 Hose Retaining Cap 44 Waterproof Washer
20 Hose 45 Pump Handle
21 Cap of Safety Valve Rod 46 Nut
22 Safety Valve Cap 47 Orient Seat
23 Caution Ring Green 48 Piston
24 Caution Ring Yellow 49 Piston O-ring
25 Safety Valve Spring
7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Page 8
Loading...