![](/html/89/891a/891a853b854b7a8d7820b673d601c01f34b0bd18c1114faf15af1fb6545360c0/bg1.png)
(540) 563-2000
S-604 / S-604-25 FLEXHORN
CSP S-604
Issue 2
FOUR WATT PAGING HORN
INTRODUCTION
The Clarity Four Watt FlexHorn is designed to
provide voice paging as well as background music.
This horn is weatherproof and can be used indoors or
outside in environments ranging from -20 to +55
degrees C. Different wattage taps to the transformer
are achieved by connecting to the color coded cable.
The horn is available in gray, beige, and white.
Model S-604-W White
Model S-604-GY Gray
Model S-604-BGE Beige
Model S-604-25-W White
Model S-604-25-GY Gray
Model S-604-25-BGE Beige
WIRING
MOUNTING INSTRUCTIONS
FLUSH MOUNT
Using the template (box insert) packaged with the
speaker, draw the speaker outline on the wall to be
cut. Make appropriate wiring connections (see
Wiring) and test the speaker for operation. Using
appropriate mounting screws (not furnished), drill
and mount the flange as shown.
Wattage Taps
Color Designation
Black Common
White .5 Watt
Brown 1 Watt
Green 2 Watts
Red 4 Watts
UNIVERSAL BRACKET
Loosen or separate the universal bracket leaves by
loosening or removing the handle and hardware.
Using the back leaf as a template, mark the wall
through the mounting holes, drill and mount to the
wall using appropriate screws (not furnished) or
mount directly to a junction box. Mount the
T-bracket to the back of the horn as shown using the
(2) ½” screws provided.
"C" CLAMP FOR "I" BEAM MOUNTING
A "C" clamp is provided with the horns to allow
mounting to a beam. Place the bolt through the hole
in the bottom of the base to secure the "C" clamp to
the beam. It is suggested that the horn be mounted to
the underside of the "I" beam to provide the
maximum of positioning adjustments. Mount “C”
clamp with (2) ½” screws provided.
947446
1
![](/html/89/891a/891a853b854b7a8d7820b673d601c01f34b0bd18c1114faf15af1fb6545360c0/bg2.png)
TECHNICAL ASSISTANCE
When trouble is reported, verify that AC power is
being supplied to the unit and there are no shorts or
grounds on cabling.
Assistance in troubleshooting is available from the
factory. When calling, you should have a VOM
available and be calling from the job site. Call
(540) 563-2000 and ask for Technical Support or
(540) 767-1555 for Clarity 24-hour Automated
Support.
Visit our website at http://www.clarity-com.com.
CLARITY equipment is not field repairable.
CLARITY maintains service facilities in Roanoke,
VA. Should repairs be necessary, attach a tag to the
unit clearly stating company name, address, phone
number, contact person, and the nature of the
problem. Send the unit to:
Clarity
Repair and Return Dept.
5614 Hollins Road
Roanoke, VA 24019-5056
warrants its products to be free from defects in materials and workmanship under conditions of normal use and service for a
LIMITED WARRANTY
Clarity
period of one year from the dat e of shi p ment. The obli gation un d er this war ranty sh all be li mit ed to the replacemen t, rep air or
refund of an y suc h d efecti ve d evice withi n the warr anty period , provided t h at:
1. Inspection b y Clar it y in dicat es th e val id ity of the cl aim ;
2. The defect is not the result of d am ag e, mis use, or n egli g ence aft er the ori gi nal ship m ent;
3. The product has n ot been in any wa y repaired b y oth er s and that f actory seal ed un its ar e un op en ed (A s ervice charge plus
parts and labor will be applied to units defaced or physically damaged);
4. Freight charges for the return of products to Clarity are prepaid,
5. All units “out of warranty” ar e su bj ec t to a s er vice charg e. T h e servic e c h ar g e will cover m in or rep airs ( M aj or rep air s will be
subject to additional charges for parts and labor).
This warranty is in lieu of and excludes all other warranties, expressed or implied, and in no event shall Clarity be liable for
any anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the
purchase, operation, or use of the product.
This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the
carrier should be notified immediately. Claims for such damage should be filed with the carrier involved in accordance with the
F.O.B. point.
2