USBHUB
Clarion Advanced Technology Corporation
20 Empire Drive, Lake Forest, CA 92630-2244 - USA
DEALER
INSTALLATION
The USBHUB was made so that the
consumer can plug one Automotive
USB input into the device and have
four Automotive USB outputs
available for use.
The base of the USBHUB has four
mounting holes to secure the
USBHUB to any flat surface. Screws
are provided in the package.
The USBHUB has separate power
and ground that must be connected.
This power cable is provided. The
yellow wire must be connected to 12V
main power and the black wire must
be connected to a ground connection.
USBHUB Cable
Part # YX-X01-M005
USBHUB Unit
Black
Connector
Power Cable
Part # YX-X01-M004
Black
Yellow
USBHUB Cable
Gray
Connector
USBHUB Cable